scholarly journals Critical raw materials as a part of sustainable development

2021 ◽  
Vol 11 (5) ◽  
pp. 12-23
Author(s):  
Michal Cehlár ◽  
Zuzana Šimková
Keyword(s):  
European Union ◽  
Sustainable Development ◽  
Industrial Revolution ◽  
Raw Materials ◽  
Raw Material ◽  
The European Union ◽  
European Area ◽  
Material Sources ◽  
Committee Of The Regions ◽  
Critical Raw Materials

The presented article deals with the issue of critical raw materials in the European Union with an emphasis on sustainable development and also barite, as an only one critical raw material mined in Slovakia. The article points out in detail the deposits of individual critical raw materials within the European Union. They clearly profile the European area´s dependence on imports of critical raw materials in accordance with the Communication from the Commission to the Council, the European Economic and Social Committee and the Committee of the Regions on the European Union's list of critical raw materials. Based on a defined Herfindahl-Hirschman index, which is clearly methodologically described, the article also points to the exploitation of critical raw materials in the European Union, what is in consideration of sustainable development crucial because some inventions are fundamentally dependent on them, as is their production on world markets. This article deals with critical raw materials in the EU, because it is in this area that we would like to experience the 4th industrial revolution, which is characterized by "new products" with a short life cycle, products with the least possible impact on the environment, i.e. innovations that are often impossible without important raw materials. Is it at all possible to talk about sustainable development with such raw material sources in European Union?

scholarly journals The Role of Poland in the European Union Supply Chain of Raw Materials, Including Critical Raw Materials

2021 ◽  
Vol 5 (1) ◽  
pp. 14
Author(s):  
Krzysztof Galos ◽  
Alicja Kot-Niewiadomska ◽  
Jarosław Kamyk
Keyword(s):  
European Union ◽  
Supply Chain ◽  
High Risk ◽  
Elemental Sulfur ◽  
Raw Materials ◽  
The European Union ◽  
Mineral Raw Materials ◽  
The Eu ◽  
Critical Raw Materials

The EU’s demand for numerous mineral raw materials is growing intensively, while the security of their supplies (mostly form outside the EU) is often at high risk. This is especially the case for critical raw materials (CRMs). Poland is now and may be in the future the most important supplier of numerous mineral raw materials to other EU countries. This is especially the case for coking coal, copper, silver and elemental sulfur. This article briefly evaluates the current and future possibilities for the supply of these raw materials from Poland to the EU market.

European experience in transition to circular economy

2020 ◽  
Vol 19 (4) ◽  
pp. 598-617 ◽  
Author(s):  
S.V. Ratner
Keyword(s):  
European Union ◽  
Circular Economy ◽  
Raw Materials ◽  
Action Plan ◽  
National Level ◽  
The European Union ◽  
Scientific Methods ◽  
European Experience ◽  
General Scientific ◽  
The Eu

Subject. The article considers the concept of circular economy, which has originated relatively recently in the academic literature, and is now increasingly recognized in many countries at the national level. In the European Union, the transition to circular economy is viewed as an opportunity to improve competitiveness of the European Union, protect businesses from resource shortages and fluctuating prices for raw materials and supplies, and a way to increase employment and innovation. Objectives. The aim of the study is to analyze the incentives developed by the European Commission for moving to circular economy, and to assess their effectiveness on the basis of statistical analysis. Methods. I employ general scientific methods of research. Results. The analysis of the EU Action Plan for the Circular Economy enabled to conclude that the results of the recent research in circular economy barriers, eco-innovation, technology and infrastructure were successfully integrated into the framework of this document. Understanding the root causes holding back the circular economy development and the balanced combination of economic and administrative incentives strengthened the Action Plan, and it contributed to the circular economy development in the EU. Conclusions. The measures to stimulate the development of the circular economy proposed in the European Action Plan can be viewed as a prototype for designing similar strategies in other countries, including Russia. Meanwhile, a more detailed analysis of barriers to the circular economy at the level of individual countries and regions is needed.

The Law & Politics of Brexit: Volume II

2020 ◽  
Keyword(s):  
Decision Making ◽  
European Union ◽  
Legal Framework ◽  
Comprehensive Analysis ◽  
The European Union ◽  
Trade Relations ◽  
The United Kingdom ◽  
The Uk ◽  
Financial Settlement ◽  
The Eu

This book provides the first comprehensive analysis of the withdrawal agreement concluded between the United Kingdom and the European Union to create the legal framework for Brexit. Building on a prior volume, it overviews the process of Brexit negotiations that took place between the UK and the EU from 2017 to 2019. It also examines the key provisions of the Brexit deal, including the protection of citizens’ rights, the Irish border, and the financial settlement. Moreover, the book assesses the governance provisions on transition, decision-making and adjudication, and the prospects for future EU–UK trade relations. Finally, it reflects on the longer-term challenges that the implementation of the 2016 Brexit referendum poses for the UK territorial system, for British–Irish relations, as well as for the future of the EU beyond Brexit.

scholarly journals Complex Concentrated Alloys for Substitution of Critical Raw Materials in Applications for Extreme Conditions

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1197
Author(s):  
Dumitru Mitrica ◽  
Ioana Cristina Badea ◽  
Beatrice Adriana Serban ◽  
Mihai Tudor Olaru ◽  
Denisa Vonica ◽  
...  
Keyword(s):  
Raw Materials ◽  
Extreme Environment ◽  
Extreme Conditions ◽  
The European Union ◽  
Critical Metals ◽  
Research Directions ◽  
Level Of Involvement ◽  
General Evaluation ◽  
Critical Metal ◽  
Critical Raw Materials

The paper is proposing a mini-review on the capability of the new complex concentrated alloys (CCAs) to substitute or reduce the use of critical raw materials in applications for extreme conditions. Aspects regarding the regulations and expectations formulated by the European Union in the most recent reports on the critical raw materials were presented concisely. A general evaluation was performed on the CCAs concept and the research directions. The advantages of using critical metals for particular applications were presented to acknowledge the difficulty in the substitution of such elements with other materials. In order to establish the level of involvement of CCAs in the reduction of critical metal in extreme environment applications, a presentation was made of the previous achievements in the field and the potential for the reduction of critical metal content through the use of multi-component compositions.

INTRODUCTION: HEALTH TECHNOLOGY ASSESSMENT AND THE EUROPEAN UNION

2000 ◽  
Vol 16 (2) ◽  
pp. 299-302 ◽  
Author(s):  
David Banta ◽  
Wija Oortwijn
Keyword(s):  
Public Health ◽  
Decision Making ◽  
European Union ◽  
Health Technology Assessment ◽  
European Commission ◽  
Technology Assessment ◽  
Health Technology ◽  
The European Union ◽  
European Level

Health technology assessment (HTA) has become increasingly important in the European Union as an aid to decision making. As agencies and programs have been established, there is increasing attention to coordination of HTA at the European level, especially considering the growing role of the European Union in public health in Europe. This series of papers describes and analyzes the situation with regard to HTA in the 15 members of the European Union, plus Switzerland. The final paper draws some conclusions, especially concerning the future involvement of the European Commission in HTA.

EU-Sanktionspolitik in geopolitischen Zeiten: Europas schärfstes Außeninstrument und seine Herausforderungen

IG ◽  
2020 ◽  
Vol 43 (4) ◽  
pp. 278-294
Author(s):  
Niklas Helwig ◽  
Juha Jokela ◽  
Clara Portela
Keyword(s):  
Decision Making ◽  
European Union ◽  
Current Debate ◽  
Global Competition ◽  
The European Union ◽  
The United Kingdom ◽  
Policy Tool ◽  
Restrictive Measures ◽  
Fine Tune ◽  
The Eu

Sanctions are one of the toughest and most coercive tools available to the European Union (EU). They are increasingly used in order to respond to breaches of international norms and adverse security developments in the neighbourhood and beyond. However, the EU sanctions policy is facing a number of challenges related to the efficiency of decision-making, shortcomings in the coherent implementation of restrictive measures, as well as the adjustments to the post-Brexit relationship with the United Kingdom. This article analyses these key challenges for EU sanctions policy. Against the backdrop of an intensifying global competition, it points out the need to weatherproof this policy tool. The current debate on the future of the EU provides an opportunity to clarify the strategic rationale of EU sanctions and to fine-tune the sanctions machinery.

Towards an Enhanced Institutional Structure of the Eurasian Economic Union

2020 ◽  
Vol 152 ◽  
pp. 102-111
Author(s):  
Igor V. Pilipenko ◽  
Keyword(s):  
Decision Making ◽  
European Union ◽  
Institutional Structure ◽  
Governance Structures ◽  
The European Union ◽  
Integration Process ◽  
Eurasian Economic Union ◽  
Economic Commission ◽  
Economic Union ◽  
The Eu

This article considers how to enhance the institutional structure of the Eurasian Economic Union (EAEU) in order to enable timely decision-making and implementation of governance decisions in the interests of Eurasian integration deepening. We compare the governance structures of the EAEU and the European Union (EU) using the author’s technique and through the lens of theories of neofunctionalism and intergovernmentalism elaborated with respect to the EU. We propose to determine a major driver of the integration process at this stage (the College of the Eurasian Economic Commission or the EAEU member states), to reduce the number of decision-making bodies within the current institutional structure of the EAEU, and to divide clearly authority and competence of remaining bodies to exclude legal controversies in the EAEU.

scholarly journals A Multi-Criteria Decision-Making (MCDM) Approach Using Hybrid SCOR Metrics, AHP, and TOPSIS for Supplier Evaluation and Selection in the Gas and Oil Industry

Processes ◽  
2018 ◽  
Vol 6 (12) ◽  
pp. 252 ◽  
Author(s):  
Chia-Nan Wang ◽  
Ying-Fang Huang ◽  
I-Fang Cheng ◽  
Van Nguyen
Keyword(s):  
Decision Making ◽  
Supplier Selection ◽  
Raw Materials ◽  
Oil Industry ◽  
Supplier Evaluation ◽  
Multi Criteria Decision Making ◽  
Analytic Hierarchy ◽  
Ahp Model ◽  
Decision Making Unit ◽  
Stability And Accuracy

Suppliers are extremely important in business operations. The supplier ensures the supply of materials, raw materials, commodities, etc. in sufficient quantity, quality, stability, and accuracy to meet the requirements of production and business with low costs and on-time deliveries. Therefore, selecting and managing good suppliers is a prerequisite for organizing the production of quality products as desired, according to the schedule, and with reasonable prices and competitiveness in the market. It is also important to gain the support of suppliers in order to continue to improve and achieve more as a business. The evaluation and selection of a supplier is a Multi-Criteria Decision-Making (MCDM) issue, in which the decision-maker is faced with both qualitative and quantitative factors. In this research, the authors propose an MCDM model using a hybrid of Supply Chain Operations Reference metrics (SCOR metrics), the Analytic Hierarchy Process (AHP) model, and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) approach for supplier evaluation and selection in the gas and oil industry. Using literature reviews on SCOR metrics, all criteria that impact supplier selection are defined in the first stage, the AHP model is applied to determine the weight of each factor in the second stage, and the optimal supplier is presented in final stage using the TOPSIS model. As a result, Decision-Making Unit 5 (DMU-05) is found to be the best supplier for the gas and oil industry in this research. The contribution of this work is to propose a new hybrid MCDM model for supplier selection in the gas and oil industry. This research also introduces a useful tool for supplier selection in other industries.

Sign in / Sign up

Export Citation Format

Share Document