scholarly journals Thin Film Stabilization of Different VO2 Polymorphs

2020 ◽  
Author(s):  
Manish Kumar ◽  
Chirag Saharan ◽  
Sunita Rani
Keyword(s):  
Thin Film ◽  
Growth Parameters ◽  
Chemical Properties ◽  
X Ray Diffraction ◽  
Smart Windows ◽  
Thin Film Form ◽  
Potential Applications ◽  
Vo2 Thin Films ◽  
Physical And Chemical ◽  
Film Form

In recent years, VO2 has emerged as a popular candidate among the scientific community across the globe owing to its unique technological and fundamental aspects. VO2 can exist in several polymorphs (such as: A, B, C, D, M1, M2, M3, P, R and T) which offer a broad spectrum of functionalities suitable for numerous potential applications likewise smart windows, switching devices, memory materials, battery materials and so on. Each phase of VO2 has specific physical and chemical properties. The device realization based on specific functionality call for stabilization of good quality single phase VO2 thin films of desired polymorphs. Hence, the control on the growth of different VO2 polymorphs in thin film form is very crucial. Different polymorphs of VO2 can be stabilized by selecting the growth route, growth parameters and type of substrate etc. In this chapter, we present an overview of stabilization of the different phases of VO2 in the thin film form and the identification of these phases mainly by X-ray diffraction and Raman spectroscopy techniques.

scholarly journals The Influence Of NO/O2 On The NOx Storage Properties Over A Pt-Ba-Ce/γ-Al2O3 Catalyst

2019 ◽  
Vol 17 (1) ◽  
pp. 1459-1465
Author(s):  
Xuedong Feng ◽  
Jing Yi ◽  
Peng Luo
Keyword(s):  
Sol Gel ◽  
Chemical Properties ◽  
No Oxidation ◽  
Test Results ◽  
X Ray Diffraction ◽  
Storage Performance ◽  
Transmission Electron ◽  
Temperature Programmed ◽  
Physical And Chemical ◽  
Al2o3 Catalyst

AbstractWith the purpose of studying the influence of NO/O2 on the NOx storage activity, a Pt-Ba-Ce/γ-Al2O3 catalyst was synthesized by an acid-aided sol-gel method. The physical and chemical properties of the catalyst were characterized by X-ray diffraction (XRD) and Transmission Electron Microscope (TEM) methods. The results showed that the composition of the catalyst was well-crystallized and the crystalline size of CeO2 (111) was about 5.7 nm. The mechanism of NO and NO2 storage and NOx temperature programmed desorption (NO-TPD) experiments were investigated to evaluate the NOx storage capacity of the catalyst. Pt-Ba-Ce/γ-Al2O3 catalyst presented the supreme NOx storage performance at 350℃, and the maximum value reached to 668.8 μmol / gcat. Compared with O2-free condition, NO oxidation to NO2 by O2 had a beneficial effect on the storage performance of NOx. NO-TPD test results showed that the NOx species stored on the catalyst surface still kept relatively stable even below 350℃.

Monitoring of Fluctuations in the Physical and Chemical Properties of a High-Calcium Fly Ash

1987 ◽  
Vol 113 ◽  
Author(s):  
Scott Schlorholtz ◽  
Ken Bergeson ◽  
Turgut Demirel
Keyword(s):  
Fly Ash ◽  
Chemical Properties ◽  
Operating Conditions ◽  
Physical And Chemical Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
High Calcium ◽  
Physical And Chemical ◽  
And Chemical Properties

ABSTRACTThe physical and chemical properties of fly ash produced at Ottumwa Generating Station have been monitored since April, 1985. The fly ash is produced from burning a low sulfur, sub-bituminous coal obtained from the Powder River Basin near Gillette, Wyoming. One-hundred and sixty samples of fly ash were obtained during the two year period. All of the samples were subjected to physical testing as specified by ASTM C 311. About one-hundred of the samples were also subjected to a series of tests designed to monitor the self-cementing properties of the fly ash. Many of the fly ash samples were subjected to x-ray diffraction and fluorescence analysis to define the mineralogical and chemical composition of the bulk fly ash as a function of sampling date. Hydration products in selected hardened fly ash pastes, were studied by x-ray diffraction and scanning electron microscopy. The studies indicated that power plant operating conditions influenced the compressive strength of the fly ash paste specimens. Mineralogical and morphological studies of the fly ash pastes indicated that stratlingite formation occurred in the highstrength specimens, while ettringite was the major hydration product evident in the low-strength specimens.

scholarly journals Synthesis and Conductivity Studies of Poly(Methyl Methacrylate) (PMMA) by Co-Polymerization and Blending with Polyaniline (PANi)

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1939
Author(s):  
Helyati Abu Hassan Shaari ◽  
Muhammad Mahyiddin Ramli ◽  
Mohd Nazim Mohtar ◽  
Norizah Abdul Rahman ◽  
Azizan Ahmad
Keyword(s):  
Methyl Methacrylate ◽  
Mechanical Stability ◽  
Chemical Properties ◽  
Cost Effective ◽  
Poly Methyl Methacrylate ◽  
Conducting Materials ◽  
Potential Applications ◽  
Polymerization Condition ◽  
Physical And Chemical ◽  
And Chemical Properties

Poly(methyl methacrylate) (PMMA) is a lightweight insulating polymer that possesses good mechanical stability. On the other hand, polyaniline (PANi) is one of the most favorable conducting materials to be used, as it is easily synthesized, cost-effective, and has good conductivity. However, most organic solvents have restricted potential applications due to poor mechanical properties and dispersibility. Compared to PANi, PMMA has more outstanding physical and chemical properties, such as good dimensional stability and better molecular interactions between the monomers. To date, many research studies have focused on incorporating PANi into PMMA. In this review, the properties and suitability of PANi as a conducting material are briefly reviewed. The major parts of this paper reviewed different approaches to incorporating PANi into PMMA, as well as evaluating the modifications to improve its conductivity. Finally, the polymerization condition to prepare PMMA/PANi copolymer to improve its conductivity is also discussed.

scholarly journals Between single ion magnets and macromolecules: a polymer/transition metal-based semi-solid solution

2018 ◽  
Vol 9 (36) ◽  
pp. 7277-7286 ◽  
Author(s):  
Anna M. Majcher ◽  
Paweł Dąbczyński ◽  
Mateusz M. Marzec ◽  
Magdalena Ceglarska ◽  
Jakub Rysz ◽  
...  
Keyword(s):  
Thin Film ◽  
Solid Solution ◽  
Transition Metal ◽  
Thin Film Form ◽  
Bulk Solid ◽  
New Material ◽  
Semi Solid ◽  
Film Form

A new material combining polymers and magnetic relaxations both in the bulk solid solution and in the thin film form.

Adsorption–Desorption Characteristics of ss-DNA on 2D TpTta-COF Studied by Fluorescently Labeled Oligonucleotides

NANO ◽  
2021 ◽  
pp. 2150050
Author(s):  
Zhaoyu Han ◽  
Sen Li ◽  
Shaoxian Yin ◽  
Zhi-Qin Wang ◽  
Yanfei Cai ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Kinetic Mechanism ◽  
Optical Biosensors ◽  
Desorption Kinetic ◽  
Wide Range ◽  
Potential Applications ◽  
Fluorescently Labeled Oligonucleotides ◽  
Adsorption Desorption ◽  
Physical And Chemical ◽  
And Chemical Properties

Being the newest member of the 2D materials family, 2D-nanosheet possesses many distinctive physical and chemical properties resulting in a wide range of potential applications. Recently, it was discovered that 2D COF can adsorb single-stranded DNA (ss-DNA) efficiently as well as usefully to quench fluorophores. These properties make it possible to prepare DNA-based optical biosensors using 2D COF. While practical analytical applications are being demonstrated, the fundamental understanding of binding between 2D COF and DNA in solution received relatively less attention. In this work, we carried out a systematic study to understand the adsorption and desorption kinetic, mechanism, and influencing factors of ss-DNA on the surface of 2D COF. We demonstrated that shorter DNAs are adsorbed more rapidly and bind more tightly to the surface of 2D COF. The adsorption is favored by a higher pH. The different buffer types also can affect the adsorption. In Tris-HCl solution, the adsorption reached highest efficiency. By adding the complementary DNA (cDNA), desorption of the absorbed DNA on 2D COF can be achieved. Further, desorption efficiency can also be exchanged by various surfactant in solution. These findings are important for further understanding of the interactions between DNA and COFs and for the optimization of DNA and COF-based devices and sensors.

scholarly journals Recent Progress in the Synthesis and Characterization of Diarylethene-based MOFs

2014 ◽  
Vol 70 (a1) ◽  
pp. C1223-C1223
Author(s):  
Jason Benedict ◽  
Ian Walton ◽  
Dan Patel ◽  
Jordan Cox
Keyword(s):  
Chemical Properties ◽  
Building Blocks ◽  
Synthesis And Characterization ◽  
Next Generation ◽  
Design Synthesis ◽  
Thermally Induced ◽  
Potential Applications ◽  
External Stimuli ◽  
Physical And Chemical

Metal-organic Frameworks (MOFs) remain an extremely active area of research given the wide variety of potential applications and the enormous diversity of structures that can be created from their constituent building blocks. While MOFs are typically employed as passive materials, next-generation materials will exhibit structural and/or electronic changes in response to applied external stimuli including light, charge, and pH. Herein we present recent results in which advanced photochromic diarylethenes are combined with MOFs through covalent and non-covalent methods to create photo-responsive permanently porous crystalline materials. This presentation will describe the design, synthesis, and characterization of next-generation photo-switchable diarylethene based ligands which are subsequently used to photo-responsive MOFs. These UBMOF crystals are, by design, isostructural with previously reported non-photoresponsive frameworks which enables a systematic comparison of their physical and chemical properties. While the photoswitching of the isolated ligand in solution is fully reversible, the cycloreversion reaction is suppressed in the UBMOF single crystalline phase. Spectroscopic evidence for thermally induced cycloreversion will be presented, as well as a detailed analysis addressing the limits of X-ray diffraction techniques applied to these systems.

Preparation and Melting of Zr-1.0Nb Alloy

2016 ◽  
Vol 869 ◽  
pp. 578-584 ◽  
Author(s):  
Armando Cirilo Souza ◽  
J.L. Rossi ◽  
P. Tsakiropoulos ◽  
L.G. Martinez ◽  
Carlos Roberto Grandini ◽  
...  
Keyword(s):  
Nuclear Reactor ◽  
Chemical Properties ◽  
Zirconium Alloys ◽  
Processing Parameters ◽  
X Ray Diffraction ◽  
High Permeability ◽  
Physical And Chemical ◽  
Good Homogeneity ◽  
Consumable Electrodes ◽  
And Chemical Properties

Zirconium alloys have many applications in industry in services too harsh for stainless steels, nickel alloys or where a noteworthy improvement in service life may be achieved, by choosing zirconium alloys instead of other metals, such as high permeability to thermal neutrons and excellent corrosion resistance in nuclear reactor environments. Mixing alloying elements, such as niobium, molybdenum, tin, titanium and tantalum, with zirconium changes its physical and chemical properties, especially its resistance to corrosion. In this study, specimens of Zr-1.0Nb alloy were obtained by melting in a furnace with non-consumable electrodes in argon atmosphere. Different samples were prepared to ensure good homogeneity of the specimens. The melting procedure was tested several times to determine the parameters that ensure proper alloy handling. These parameters include the melting point of the alloys under pressure and the current in the furnace. Using the derived melting parameters and processing parameters, it has been obtained Zr-1.0Nb alloy specimens with appropriate homogeneity, as confirmed by auxiliary characterization techniques, such as optical microscopy, scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. For these methods, the requirements for physicochemical properties in the nuclear sector were incorporated into the analyses.

Sign in / Sign up

Export Citation Format

Share Document