scholarly journals Avaliação da esteira de turbulência gerada por um parque eólico teórico na região do Pampa Gaúcho utilizando o modelo WRF

2020 ◽  
Vol 42 ◽  
pp. e27
Author(s):  
Eduardo Stüker ◽  
Franciano Scremin Puhales ◽  
Luiz Eduardo Medeiros ◽  
Felipe Denardin Costa
Keyword(s):  
Boundary Layer ◽  
Wind Farm ◽  
Wrf Model ◽  
Weather Research And Forecasting ◽  
Atmospheric Flow ◽  
Near Surface ◽  
Control Simulation ◽  
Wind Generators ◽  
Farm Model ◽  
Runoff Decrease

The main objective of this study is to analyze the influence of a wind farm on the variables that control the flow in the atmospheric boundary layer. The simulated period was the whole year of 2008, using a control simulation performed with the Weather Research and Forecasting model (WRF), and the wind farm model (the WRF model with the module Fitch, which parameters the influence of wind turbines on atmospheric flow). Both simulations using the Yonsei-University (YSU) boundary layer parameterization. From the control simulation is made the validation of the model, using observational data collected in two automatic stations of the National Institute of Meteorology (INMET) in the cities of Alegrete-RS and Quaraí-RS. The wind farm idealized in this work has 100 wind generators of 3 MW of power with 120 m in height and with rotor measuring 125 m in diameter. Although the wind speed responds adequately, the temperature and turbulence of near-surface runoff decrease. Analysis of the dependence of near-surface turbulence with vertical stability indicates that the turbulence being generated by the turbines is not reaching the surface. This problem may be related to the chosen boundary layer parameterization.

scholarly journals A Revised Scheme for the WRF Surface Layer Formulation

2012 ◽  
Vol 140 (3) ◽  
pp. 898-918 ◽  
Author(s):  
Pedro A. Jiménez ◽  
Jimy Dudhia ◽  
J. Fidel González-Rouco ◽  
Jorge Navarro ◽  
Juan P. Montávez ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Surface Layer ◽  
Lower Limit ◽  
Planetary Boundary Layer ◽  
Full Range ◽  
Wrf Model ◽  
Weather Research And Forecasting ◽  
Similarity Functions ◽  
Near Surface ◽  
Diagnostic Variables

Abstract This study summarizes the revision performed on the surface layer formulation of the Weather Research and Forecasting (WRF) model. A first set of modifications are introduced to provide more suitable similarity functions to simulate the surface layer evolution under strong stable/unstable conditions. A second set of changes are incorporated to reduce or suppress the limits that are imposed on certain variables in order to avoid undesired effects (e.g., a lower limit in u*). The changes introduced lead to a more consistent surface layer formulation that covers the full range of atmospheric stabilities. The turbulent fluxes are more (less) efficient during the day (night) in the revised scheme and produce a sharper afternoon transition that shows the largest impacts in the planetary boundary layer meteorological variables. The most important impacts in the near-surface diagnostic variables are analyzed and compared with observations from a mesoscale network.

Simulation Study on Dynamic Reactive Power Compensation of Grid-Connected Wind Farms

2013 ◽  
Vol 756-759 ◽  
pp. 4171-4174 ◽  
Author(s):  
Xiao Ming Wang ◽  
Xing Xing Mu
Keyword(s):  
Voltage Stability ◽  
Wind Farm ◽  
Reactive Power ◽  
Wind Farms ◽  
Reactive Power Compensation ◽  
Wind Speeds ◽  
Wind Generators ◽  
Reactive Compensation ◽  
Farm Model ◽  
Set Up

With the Asynchronous wind generators as research object, this paper analyzes the problems of the voltage stability and the generation mechanism of the reactive power compensation during the wind farms connected operation. For paralleling capacitor bank has shown obvious defects, therefore this paper employs dynamic reactive power compensation to improve reactive characteristics of grid-connected wind farms. With the influences of different wind disturbances and grid faults on wind farms, wind farm model is set up and dynamic reactive power compensation system and wind speeds are built in the Matlab/Simulink software, The simulation result shows that they can provide reactive power compensation to ensure the voltage stability of the wind farms. But STATCOM needs less reactive compensation capacity to make sure the voltage and active power approaching steady state before the faults more quickly, Therefore STATCOM is more suitable for wind farms connected dynamic reactive power compensation.

scholarly journals Estimating Daytime Planetary Boundary Layer Heights over a Valley from Rawinsonde Observations at a Nearby Airport: An Application to the Page Valley in Virginia, United States

2016 ◽  
Vol 55 (3) ◽  
pp. 791-809 ◽  
Author(s):  
Temple R. Lee ◽  
Stephan F. J. De Wekker
Keyword(s):  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Weather Forecasting ◽  
Wrf Model ◽  
Heat Fluxes ◽  
Weather Research And Forecasting ◽  
Dispersion Modeling ◽  
Blue Ridge Mountains ◽  
Terrain Following ◽  
Regional Reanalysis

AbstractThe planetary boundary layer (PBL) height is an essential parameter required for many applications, including weather forecasting and dispersion modeling for air quality. Estimates of PBL height are not easily available and often come from twice-daily rawinsonde observations at airports, typically at 0000 and 1200 UTC. Questions often arise regarding the applicability of PBL heights retrieved from these twice-daily observations to surrounding locations. Obtaining this information requires knowledge of the spatial variability of PBL heights. This knowledge is particularly limited in regions with mountainous terrain. The goal of this study is to develop a method for estimating daytime PBL heights in the Page Valley, located in the Blue Ridge Mountains of Virginia. The approach includes using 1) rawinsonde observations from the nearest sounding station [Dulles Airport (IAD)], which is located 90 km northeast of the Page Valley, 2) North American Regional Reanalysis (NARR) output, and 3) simulations with the Weather Research and Forecasting (WRF) Model. When selecting days on which PBL heights from NARR compare well to PBL heights determined from the IAD soundings, it is found that PBL heights are higher (on the order of 200–400 m) over the Page Valley than at IAD and that these differences are typically larger in summer than in winter. WRF simulations indicate that larger sensible heat fluxes and terrain-following characteristics of PBL height both contribute to PBL heights being higher over the Page Valley than at IAD.

scholarly journals Impact of environmental moisture on tropical cyclone intensification

2015 ◽  
Vol 15 (11) ◽  
pp. 16111-16139 ◽  
Author(s):  
L. Wu ◽  
H. Su ◽  
R. G. Fovell ◽  
T. J. Dunkerton ◽  
Z. Wang ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Tropical Cyclone ◽  
Inner Core ◽  
Wrf Model ◽  
Weather Research And Forecasting ◽  
Convective Activity ◽  
Dry Air ◽  
Moving Storm ◽  
Lagrangian Boundary ◽  
Moisture Increase

Abstract. The impacts of environmental moisture on the intensification of a tropical cyclone (TC) are investigated in the Weather Research and Forecasting (WRF) model, with a focus on the azimuthal asymmetry of the moisture impacts. A series of sensitivity experiments with varying moisture perturbations in the environment are conducted and the Marsupial Paradigm framework is employed to understand the different moisture impacts. We find that modification of environmental moisture has insignificant impacts on the storm in this case unless it leads to convective activity in the environment, which deforms the quasi-Lagrangian boundary of the storm. By facilitating convection and precipitation outside the storm, enhanced environmental moisture ahead of the northwestward-moving storm induces a dry air intrusion to the inner core and limits TC intensification. However, increased moisture in the rear quadrants favors intensification by providing more moisture to the inner core and promoting storm symmetry, with primary contributions coming from moisture increase in the boundary layer. The different impacts of environmental moisture on TC intensification are governed by the relative locations of moisture perturbations and their interactions with the storm Lagrangian structure.

scholarly journals Approximating Input Data to a Snowmelt Model Using Weather Research and Forecasting Model Outputs in Lieu of Meteorological Measurements

2019 ◽  
Vol 20 (5) ◽  
pp. 847-862 ◽  
Author(s):  
Scott Havens ◽  
Danny Marks ◽  
Katelyn FitzGerald ◽  
Matt Masarik ◽  
Alejandro N. Flores ◽  
...  
Keyword(s):  
Snow Water Equivalent ◽  
Wrf Model ◽  
Temporal Distribution ◽  
Meteorological Variables ◽  
Weather Research And Forecasting ◽  
Atmospheric Flow ◽  
Temperature And Precipitation ◽  
Runoff Forecasting ◽  
Input Variables ◽  
Weather Research

Abstract Forecasting the timing and magnitude of snowmelt and runoff is critical to managing mountain water resources. Warming temperatures are increasing the rain–snow transition elevation and are limiting the forecasting skill of statistical models relating historical snow water equivalent to streamflow. While physically based methods are available, they require accurate estimations of the spatial and temporal distribution of meteorological variables in complex terrain. Across many mountainous areas, measurements of precipitation and other meteorological variables are limited to a few reference stations and are not adequate to resolve the complex interactions between topography and atmospheric flow. In this paper, we evaluate the ability of the Weather Research and Forecasting (WRF) Model to approximate the inputs required for a physics-based snow model, iSnobal, instead of using meteorological measurements, for the Boise River Basin (BRB) in Idaho, United States. An iSnobal simulation using station data from 40 locations in and around the BRB resulted in an average root-mean-square error (RMSE) of 4.5 mm compared with 12 SNOTEL measurements. Applying WRF forcings alone was associated with an RMSE of 10.5 mm, while including a simple bias correction to the WRF outputs of temperature and precipitation reduced the RMSE to 6.5 mm. The results highlight the utility of using WRF outputs as input to snowmelt models, as all required input variables are spatiotemporally complete. This will have important benefits in areas with sparse measurement networks and will aid snowmelt and runoff forecasting in mountainous basins.

Gravity Waves and Other Mechanisms Modulating the Diurnal Precipitation over One of the Rainiest Spots on Earth: Observations and Simulations in 2016

2020 ◽  
Vol 148 (9) ◽  
pp. 3933-3950
Author(s):  
Johanna Yepes ◽  
John F. Mejía ◽  
Brian Mapes ◽  
Germán Poveda
Keyword(s):  
Diurnal Cycle ◽  
Wrf Model ◽  
Early Morning ◽  
Weather Research And Forecasting ◽  
Near Surface ◽  
Additional Hypothesis ◽  
Convective Systems ◽  
Earth Observations ◽  
Diurnal Rainfall ◽  
Static Energy

ABSTRACT The diurnal cycle of precipitation and thermodynamic profiles over western Colombia are examined in new GPM satellite rainfall products, first-ever research balloon launches during 2016 over both sea and land, and numerical simulations with the Weather Research and Forecasting (WRF) Model. This paper evaluates the Mapes et al. mechanism for midnight–early morning coastal convection that propagates offshore: reduction of inhibition in the crests of lower-tropospheric internal waves. Shipborne balloon launches confirm the evening development of such inhibition by a warm overhang in saturation moist static energy (SMSE) near 700–800 hPa. This feature relaxes overnight, consistent with the disinhibition hypothesis for early morning rains. Over the coastal plain, soundings also show late afternoon increases in near-surface MSE large enough to predominate over the overhang’s inhibition effect, driving a second peak in the rainfall diurnal cycle. Parameterized convection simulations fail to simulate the observed coastal rainfall. Still, during a November 2016 wet spell, a cloud-permitting one-way nested 4 km simulation performs better, simulating morning coastal rainfall. In that simulation, however, early morning cooling in the 700–800 hPa layer appears mainly as a standing signal resembling the local radiative effect rather than as a propagating wave. We consider the additional hypothesis that the offshore propagation of that morning convection could involve advection or wind shear effects on organized convective systems. Strong easterlies at mountaintop level were indeed simulated, but that is one of the model’s strongest biases, so the mechanisms of the model’s partial success in simulating diurnal rainfall remain ambiguous.

scholarly journals Comparison of Convective Boundary Layer Velocity Spectra Retrieved from Large- Eddy-Simulation and Weather Research and Forecasting Model Data

2014 ◽  
Vol 53 (2) ◽  
pp. 377-394 ◽  
Author(s):  
Jeremy A. Gibbs ◽  
Evgeni Fedorovich
Keyword(s):  
Boundary Layer ◽  
Convective Boundary Layer ◽  
Wrf Model ◽  
Velocity Fields ◽  
Weather Research And Forecasting ◽  
Small Scale ◽  
Convective Boundary ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Velocity Spectra

AbstractAs computing capabilities expand, operational and research environments are moving toward the use of finescale atmospheric numerical models. These models are attractive for users who seek an accurate description of small-scale turbulent motions. One such numerical tool is the Weather Research and Forecasting (WRF) model, which has been extensively used in synoptic-scale and mesoscale studies. As finer-resolution simulations become more desirable, it remains a question whether the model features originally designed for the simulation of larger-scale atmospheric flows will translate to adequate reproductions of small-scale motions. In this study, turbulent flow in the dry atmospheric convective boundary layer (CBL) is simulated using a conventional large-eddy-simulation (LES) code and the WRF model applied in an LES mode. The two simulation configurations use almost identical numerical grids and are initialized with the same idealized vertical profiles of wind velocity, temperature, and moisture. The respective CBL forcings are set equal and held constant. The effects of the CBL wind shear and of the varying grid spacings are investigated. Horizontal slices of velocity fields are analyzed to enable a comparison of CBL flow patterns obtained with each simulation method. Two-dimensional velocity spectra are used to characterize the planar turbulence structure. One-dimensional velocity spectra are also calculated. Results show that the WRF model tends to attribute slightly more energy to larger-scale flow structures as compared with the CBL structures reproduced by the conventional LES. Consequently, the WRF model reproduces relatively less spatial variability of the velocity fields. Spectra from the WRF model also feature narrower inertial spectral subranges and indicate enhanced damping of turbulence on small scales.

scholarly journals The Performance of Different Boundary-Layer Parameterisations in Meteorological Modelling in a Southwestern Coastal Area of the Iberian Peninsula

2012 ◽  
Vol 2012 ◽  
pp. 1-13
Author(s):  
M. A. Hernández-Ceballos ◽  
J. A. Adame ◽  
J. P. Bolivar ◽  
B. A. De la Morena
Keyword(s):  
Boundary Layer ◽  
Coastal Area ◽  
Meteorological Parameters ◽  
Wrf Model ◽  
Near Surface ◽  
Diurnal Cycles ◽  
Medium Range Forecast ◽  
Critical Richardson Number ◽  
Standard Configuration ◽  
Meteorological Modelling

The performance of four atmospheric boundary layer (ABL) schemes in reproducing the diurnal cycles of surface meteorological parameters as well as the ABL structure and depth over a coastal area of southwestern Iberia was assessed using the mesoscale meteorological Weather Research and Forecasting (WRF) model. The standard configuration of the medium-range forecast (MRF) and the Yonsei University (YSU) ABL schemes were employed. Modified versions of each, in which the values of the bulk critical Richardson number () and the coefficient of proportionality () were varied, were also used. The results were compared to meteorological measurements representative of SW-NW and NE synoptic flows. The WRF model in its basic configuration was found to yield satisfactory forecasting results for nearly all near-surface atmospheric variables. Modifications in and did not influence the simulation of surface meteorological parameters. Both parameterisations appeared to be optimal predictors of ABL structure, and all four ABL schemes tended to produce a cold ABL during both periods, although this ABL was drier in the SW-NW flow season and wetter in the NE flow season. Considering all the parameters analysed, the MRF ABL parameterisation with the lowest values of and coefficients tested (0.25 and 0.0, resp.) tends to show a realistic simulation.

scholarly journals Local and Mesoscale Impacts of Wind Farms as Parameterized in a Mesoscale NWP Model

2012 ◽  
Vol 140 (9) ◽  
pp. 3017-3038 ◽  
Author(s):  
Anna C. Fitch ◽  
Joseph B. Olson ◽  
Julie K. Lundquist ◽  
Jimy Dudhia ◽  
Alok K. Gupta ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Kinetic Energy ◽  
Wind Farm ◽  
Weather Prediction ◽  
Wind Farms ◽  
Mean Flow ◽  
Thrust Coefficient ◽  
Near Surface ◽  
Neutral Boundary Layer

Abstract A new wind farm parameterization has been developed for the mesoscale numerical weather prediction model, the Weather Research and Forecasting model (WRF). The effects of wind turbines are represented by imposing a momentum sink on the mean flow; transferring kinetic energy into electricity and turbulent kinetic energy (TKE). The parameterization improves upon previous models, basing the atmospheric drag of turbines on the thrust coefficient of a modern commercial turbine. In addition, the source of TKE varies with wind speed, reflecting the amount of energy extracted from the atmosphere by the turbines that does not produce electrical energy. Analyses of idealized simulations of a large offshore wind farm are presented to highlight the perturbation induced by the wind farm and its interaction with the atmospheric boundary layer (BL). A wind speed deficit extended throughout the depth of the neutral boundary layer, above and downstream from the farm, with a long wake of 60-km e-folding distance. Within the farm the wind speed deficit reached a maximum reduction of 16%. A maximum increase of TKE, by nearly a factor of 7, was located within the farm. The increase in TKE extended to the top of the BL above the farm due to vertical transport and wind shear, significantly enhancing turbulent momentum fluxes. The TKE increased by a factor of 2 near the surface within the farm. Near-surface winds accelerated by up to 11%. These results are consistent with the few results available from observations and large-eddy simulations, indicating this parameterization provides a reasonable means of exploring potential downwind impacts of large wind farms.

scholarly journals Impacts of the Lowest Model Level Height on the Performance of Planetary Boundary Layer Parameterizations

2012 ◽  
Vol 140 (2) ◽  
pp. 664-682 ◽  
Author(s):  
Hyeyum Hailey Shin ◽  
Song-You Hong ◽  
Jimy Dudhia
Keyword(s):  
Boundary Layer ◽  
Surface Layer ◽  
Planetary Boundary Layer ◽  
Numerical Models ◽  
Wrf Model ◽  
Weather Research And Forecasting ◽  
Implicit Assumption ◽  
Convective Model ◽  
Local Scheme ◽  
Level Height

The lowest model level height z1 is important in atmospheric numerical models, since surface layer similarity is applied to the height in most of the models. This indicates an implicit assumption that z1 is within the surface layer. In this study, impacts of z1 on the performance of planetary boundary layer (PBL) parameterizations are investigated. Three conceptually different schemes in the Weather Research and Forecasting (WRF) model are tested for one complete diurnal cycle: the nonlocal, first-order Yonsei University (YSU) and Asymmetric Convective Model version 2 (ACM2) schemes and the local, 1.5-order Mellor–Yamada–Janjić (MYJ) scheme. Surface variables are sensitive to z1 in daytime when z1 is below 12 m, even though the height is within the surface layer. Meanwhile during nighttime, the variables are systematically altered as z1 becomes shallower from 40 m. PBL structures show the sensitivity in the similar manner, but weaker. The order of sensitivity among the three schemes is YSU, ACM2, and MYJ. The significant sensitivity of the YSU parameterization comes from the PBL height calculation. This is considerably alleviated by excluding the thermal excess term in determining the PBL height when z1 is within the surface layer. The factor that specifies the ratio of nonlocal transport to total mixing is critical to the sensitivity of the ACM2 scheme. The MYJ scheme has no systematic sensitivity, since it is a local scheme. It is also noted that a numerical instability appears accompanying the unrealistic PBL structures when the grid spacing in the surface layer suddenly jumps.

Sign in / Sign up

Export Citation Format

Share Document