scholarly journals Application of the contour method to determine axial residual stresses in cold extruded steel rods

2021 ◽  
Vol 49 (4) ◽  
pp. 941-949
Author(s):  
O. Aydin ◽  
C. Simsir
Keyword(s):  
Residual Stresses ◽  
Stress Measurement ◽  
High Energy ◽  
Measurement Methods ◽  
Contour Method ◽  
Cold Extrusion ◽  
Finite Element Analyses ◽  
X Ray ◽  
Manufacturing Performance ◽  
Massive Forming

Residual stresses in cold extruded parts play an important role in both component lifetime and succeeding in manufacturing performance. When a cold extruded part is used directly, the lifetime of the part depends on the residual stresses induced during cold extrusion. On the other hand, if the part is exposed to post operations such as machining, residual stresses may cause distortions. Despite their importance, there are only a few residual stress measurement methods to assess axial residual stresses in full cylindrical thick components of massive forming. As high-energy X-ray and neutron diffraction methods are less available and considerably expensive, the contour method may be an alternative providing the accurate assessment of residual stresses without requiring specialized facilities. In the present work, residual stresses in cold extruded rods are determined via the contour method for various extrusion ratios. The finite element analyses for the same conditions are also carried out to provide the comparison to the contour method. The results indicate that the contour method can be a valuable candidate for the measurement of axial residual stresses in cold extruded thick components.

scholarly journals Statistical analysis of the reproducibility of residual stress measurements in cold extruded parts

2021 ◽  
Author(s):  
Fabian Jaeger ◽  
Alessandro Franceschi ◽  
Holger Hoche ◽  
Peter Groche ◽  
Matthias Oechsner
Keyword(s):  
Residual Stress ◽  
Statistical Analysis ◽  
Stress Measurement ◽  
Industrial Applications ◽  
Cold Extrusion ◽  
X Ray Diffraction ◽  
Forming Process ◽  
X Ray ◽  
Stress States ◽  
Key Aspects

AbstractCold extruded components are characterized by residual stresses, which originate from the experienced manufacturing process. For industrial applications, reproducibility and homogeneity of the final components are key aspects for an optimized quality control. Although striving to obtain identical deformation and surface conditions, fluctuation in the manufacturing parameters and contact shear conditions during the forming process may lead to variations of the spatial residual stress distribution in the final product. This could lead to a dependency of the residual stress measurement results on the relative axial and circumferential position on the sample. An attempt to examine this problem is made by the employment of design of experiments (DoE) methods. A statistical analysis of the residual stress results generated through X-Ray diffraction is performed. Additionally, the ability of cold extrusion processes to generate uniform stress states is analyzed on specimens of austenitic stainless steel 1.4404 and possible correlations with the pre-deformed condition are statistically examined. Moreover, the influence of the coating, consisting of oxalate and a MoS2 based lubricant, on the X-Ray diffraction measurements of the surface is investigated.

Investigation of Residual Stress/Strain and Texture in a Large Dissimilar Metal Weld Using Synchrotron Radiation and Neutrons

2013 ◽  
Vol 772 ◽  
pp. 193-199 ◽  
Author(s):  
Carsten Ohms ◽  
Rene V. Martins
Keyword(s):  
Synchrotron Radiation ◽  
Neutron Diffraction ◽  
Residual Stresses ◽  
Large Scale ◽  
High Energy ◽  
X Ray Diffraction ◽  
Butt Weld ◽  
X Ray ◽  
Component Size ◽  
Thin Slice

Bi-metallic piping welds are frequently used in light water nuclear reactors to connect ferritic steel pressure vessel nozzles to austenitic stainless steel primary cooling piping systems. An important aspect for the integrity of such welds is the presence of residual stresses. Measurement of these residual stresses presents a considerable challenge because of the component size and because of the material heterogeneity in the weld regions. The specimen investigated here was a thin slice cut from a full-scale bi-metallic piping weld mock-up. A similar mock-up had previously been investigated by neutron diffraction within a European research project called ADIMEW. However, at that time, due to the wall thickness of the pipe, stress and spatial resolution of the measurements were severely restricted. One aim of the present investigations by high energy synchrotron radiation and neutrons used on this thin slice was to determine whether such measurements would render a valid representation of the axial strains and stresses in the uncut large-scale structure. The advantage of the small specimen was, apart from the easier manipulation, the fact that measurement times facilitated a high density of measurements across large parts of the test piece in a reasonable time. Furthermore, the recording of complete diffraction patterns within the accessible diffraction angle range by synchrotron X-ray diffraction permitted mapping the texture variations. The strain and stress results obtained are presented and compared for the neutron and synchrotron X-ray diffraction measurements. A strong variation of the texture pole orientations is observed in the weld regions which could be attributed to individual weld torch passes. The effect of specimen rocking on the scatter of the diffraction data in the butt weld region is assessed during the neutron diffraction measurements.

scholarly journals Cross-Sectional Mapping of Residual Stresses by Measuring the Surface Contour After a Cut

2000 ◽  
Vol 123 (2) ◽  
pp. 162-168 ◽  
Author(s):  
M. B. Prime
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Stress Measurement ◽  
Superposition Principle ◽  
New Method ◽  
Contour Method ◽  
Stress Profile ◽  
Relaxation Methods ◽  
Cross Sectional ◽  
Residual Stress Profile

A powerful new method for residual stress measurement is presented. A part is cut in two, and the contour, or profile, of the resulting new surface is measured to determine the displacements caused by release of the residual stresses. Analytically, for example using a finite element model, the opposite of the measured contour is applied to the surface as a displacement boundary condition. By Bueckner’s superposition principle, this calculation gives the original residual stresses normal to the plane of the cut. This “contour method” is more powerful than other relaxation methods because it can determine an arbitrary cross-sectional area map of residual stress, yet more simple because the stresses can be determined directly from the data without a tedious inversion technique. The new method is verified with a numerical simulation, then experimentally validated on a steel beam with a known residual stress profile.

scholarly journals Longitudinal Residual Stress Analysis in AA2024-T3 Friction Stir Welding

2013 ◽  
Vol 7 (1) ◽  
pp. 18-26 ◽  
Author(s):  
Pierpaolo Carlone ◽  
Gaetano S. Palazzo
Keyword(s):  
Friction Stir Welding ◽  
Residual Stresses ◽  
Process Parameters ◽  
Material Properties ◽  
Stress Measurement ◽  
Dynamic Performance ◽  
Contour Method ◽  
Influence Of Process Parameters ◽  
Friction Stir ◽  
Longitudinal Residual Stress

Friction Stir Welding (FSW) is an innovative solid-state joining process, which is gaining a great deal of attention in several applicative sectors. The opportune definition of process parameters, i.e. minimizing residual stresses, is crucial to improve joint reliability in terms of static and dynamic performance. Longitudinal residual stresses, induced by FSW in AA2024-T3 butt joints, have been inferred by means of a recently developed technique, namely the contour method. Two approaches to stress measurement have been adopted; the former is based on the assumption of uniform material properties, the latter takes into account microstructural effects and material properties variations in the welding zones. The influence of process parameters, namely rotating and welding speeds, on stress distribution is also discussed.

X-ray residual stress analysis of cylindrically curved surfaces—estimation of circumferential distributions of residual stresses

2003 ◽  
Vol 38 (5) ◽  
pp. 459-468 ◽  
Author(s):  
T Oguri ◽  
K Murata ◽  
Y Sato
Keyword(s):  
Residual Stresses ◽  
Least Squares Method ◽  
Stress Measurement ◽  
Incident Angle ◽  
Axial Stress ◽  
Circumferential Stress ◽  
Distribution Functions ◽  
Scanning Method ◽  
X Ray ◽  
Reference Axis

A new measuring technique utilizing X-ray diffraction is proposed in order to estimate the circumferential distributions of residual stresses on convex/concave cylindrical surfaces. This technique requires neither tilting X-ray beams in the circumferential direction in which the X-ray incident angle tends to be limited nor adjusting the normal of the irradiation area to the reference axis of the ψ angle. The circumferential distributions of the circumferential stress and of the axial stress are estimated from the diffraction angles at ψ = 0° and the axial stresses obtained by the stress measurement on multiple inclined areas on the cylindrical surfaces under the configuration of the axial stress measurement using the iso-inclination scanning method. This estimate technique was applied to two round bars of steel, one with circumferential distributions of the residual stresses and the other with almost uniform stresses. The distribution functions of the residual stresses were expanded to a couple of Fourier series, and the coefficients of them were determined by the least-squares method. The estimated distributions of the residual stresses were in good agreement with the actual ones.

Study on X-Ray Stress Analysis Using a New Position-Sensitive Proportional Counter

1978 ◽  
Vol 22 ◽  
pp. 233-240 ◽  
Author(s):  
Yasuo Yoshioka ◽  
Ken-ichi Hasegawa ◽  
Koh-ichi Mochiki
Keyword(s):  
Residual Stresses ◽  
Proportional Counter ◽  
Counting Rate ◽  
Angular Resolution ◽  
Stress Measurement ◽  
Over The Counter ◽  
X Ray ◽  
Position Sensitive ◽  
The Mean ◽  
Time Required

A position-sensitive proportional counter suitable for the X-ray stress measurement has been developed and residual stresses were measured with an apparatus that uses this PSD system. The counter was designed to have a good angular resolution over the counter length for the diffracted X-ray beam and high counting rates. The mean angular resolution measured was about 0.2° in 2θ (FWHM) at 200 mm, and the maximum allowable counting rate reached about 40,000 cps.The time required for the data accumulation was shown to be 1/10 to 1/30 of the time required with a standard diffractometer.

Wheel Rim Axial Residual Stress and a Proposed Mechanism for Vertical Split Rim Formation

2011 ◽  
Author(s):  
Cameron Lonsdale ◽  
John Oliver
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Stress Measurement ◽  
Axial Stress ◽  
X Ray Diffraction ◽  
X Ray ◽  
Axial Residual Stress ◽  
Railroad Wheels ◽  
Hoop Stresses ◽  
Future Work

Railroad wheels are manufactured with beneficial residual compressive hoop stresses, which are imparted by rim quenching and tempering. Hoop and radial residual stresses for wheels have been studied in detail by various organizations over the years and are relatively well characterized. However axial residual stresses, in the orientation across the rim width from back rim face to front rim face, have not been extensively investigated. This paper describes a failure mode known as a vertical split rim (VSR) and describes efforts to measure the axial residual stresses in, 1) new wheels, 2) service worn wheels and 3) wheels that have failed from VSRs. Initial axial residual stress measurement efforts, using core drilling and x-ray diffraction from the tread surface, are briefly reviewed. Further more extensive work using x-ray diffraction to measure axial residual stress on radial wheel slices is described and data are presented, focusing on differences between the three wheel types. The concept of Axial Stress Amplification (ASA) is outlined, and the relationship of axial residual stress to VSRs is discussed. A proposed mechanism for VSR formation is described. Future work, with a goal of reducing or eliminating VSRs in service, is considered.

Sign in / Sign up

Export Citation Format

Share Document