scholarly journals SYNTHESIS OF Pd-CONTAINING HYPERCROSSLINKED POLYSTYRENE AND RESEARCH OF ITS CATALYTIC PROPERTIES FOR FURFURAL HYDROGENATION

2018 ◽  
Vol 59 (4) ◽  
pp. 59
Author(s):  
Valentin Yu. Doluda ◽  
Viktoriya A. Strigina ◽  
Valentina G. Matveeva ◽  
Esfir M. Sul’man ◽  
Natalia V. Lakina
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Structural Characteristics ◽  
Nitrogen Adsorption ◽  
Pd Nanoparticles ◽  
Hypercrosslinked Polystyrene ◽  
X Ray ◽  
Physical Chemical ◽  
Polystyrene Matrix ◽  
Furfural Hydrogenation

In this paper the results were presented on the study of physical-chemical and catalytic properties of Pd nanoparticles synthesized in hypercrosslinked polystyrene matrix with various methods allowing to obtain Pd particles of different sizes. Obtained samples were sudied with the methods of chemisorption of hydrogen, nitrogen adsorption, X-ray photoelectron spectroscopy. Synthesized catalysts were tested in the reaction of catalytic furfural hydrogenation. The dependence of the catalysts activity on their structural characteristics was determined.

scholarly journals Effect of the Metal Deposition Order on Structural, Electronic and Catalytic Properties of TiO2-Supported Bimetallic Au-Ag Catalysts in 1-Octanol Selective Oxidation

Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 799
Author(s):  
Yulia Kotolevich ◽  
Ekaterina Pakrieva ◽  
Ekaterina Kolobova ◽  
Mario H. Farías ◽  
Nina Bogdanchikova ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Density Functional ◽  
Catalytic Properties ◽  
Diffuse Reflectance Spectroscopy ◽  
Density Functional Theory Method ◽  
Nitrogen Adsorption ◽  
X Ray ◽  
A Charge ◽  
Adsorption Desorption ◽  
Ag Catalysts

Au and Ag were deposited on TiO2 modified with Ce, La, Fe or Mg in order to obtain bimetallic catalysts to be used for liquid-phase oxidation of 1-octanol. The effects of the deposition order of gold and silver, and the nature of the support modifying additives and redox pretreatments on the catalytic properties of the bimetallic Au-Ag catalysts were studied. Catalysts were characterized by low-temperature nitrogen adsorption–desorption, energy dispersive spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy and ultraviolet-visible diffuse reflectance spectroscopy. It was found that pretreatments with hydrogen and oxygen at 300 °C significantly decreased the activity of AuAg catalysts (silver was deposited first) and had little effect on the catalytic properties of AgAu samples (gold was deposited first). The density functional theory method demonstrated that the adsorption energy of 1-octanol increased for all positively charged AuxAgyq (x + y = 10, with a charge of q = 0 or +1) clusters compared with the neutral counterparts. Lanthanum oxide was a very effective promoter for both monometallic and bimetallic gold and silver catalysts in the studied process.

scholarly journals Pore Modification and Phosphorus Doping Effect on Phosphoric Acid-Activated Fe-N-C for Alkaline Oxygen Reduction Reaction

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1519
Author(s):  
Jong Gyeong Kim ◽  
Sunghoon Han ◽  
Chanho Pak
Keyword(s):  
Phosphoric Acid ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Electronic States ◽  
Nitrogen Adsorption ◽  
Reduction Reaction ◽  
Phosphorus Doping ◽  
X Ray ◽  
Precious Metal Catalysts ◽  
Adsorption Desorption

The price and scarcity of platinum has driven up the demand for non-precious metal catalysts such as Fe-N-C. In this study, the effects of phosphoric acid (PA) activation and phosphorus doping were investigated using Fe-N-C catalysts prepared using SBA-15 as a sacrificial template. The physical and structural changes caused by the addition of PA were analyzed by nitrogen adsorption/desorption and X-ray diffraction. Analysis of the electronic states of Fe, N, and P were conducted by X-ray photoelectron spectroscopy. The amount and size of micropores varied depending on the PA content, with changes in pore structure observed using 0.066 g of PA. The electronic states of Fe and N did not change significantly after treatment with PA, and P was mainly found in states bonded to oxygen or carbon. When 0.135 g of PA was introduced per 1 g of silica, a catalytic activity which was increased slightly by 10 mV at −3 mA/cm2 was observed. A change in Fe-N-C stability was also observed through the introduction of PA.

scholarly journals Study of the Effect of TiO2 Layer on the Adsorption and Photocatalytic Activity of TiO2-MoS2 Heterostructures under Visible-Infrared Light

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
N. Cruz-González ◽  
O. Calzadilla ◽  
J. Roque ◽  
F. Chalé-Lara ◽  
J. K. Olarte ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Nitrogen Adsorption ◽  
High Photocatalytic Activity ◽  
Infrared Light ◽  
Polluted Water ◽  
Light Spectrum ◽  
X Ray

In the last decade, the urgent need to environmental protection has promoted the development of new materials with potential applications to remediate air and polluted water. In this work, the effect of the TiO2 thin layer over MoS2 material in photocatalytic activity is reported. We prepared different heterostructures, using a combination of electrospinning, solvothermal, and spin-coating techniques. The properties of the samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), nitrogen adsorption-desorption isotherms, UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS), and X-ray photoelectron spectroscopy (XPS). The adsorption and photocatalytic activity were evaluated by discoloration of rhodamine B solution. The TiO2-MoS2/TiO2 heterostructure presented three optical absorption edges at 1.3 eV, 2.28 eV, and 3.23 eV. The high adsorption capacity of MoS2 was eliminated with the addition of TiO2 thin film. The samples show high photocatalytic activity in the visible-IR light spectrum.

A Two-step Electrodeposition of Pd-Cu/Cu2O Nanocomposite on FTO Substrate for Non-enzymatic Hydrogen Peroxide Sensor

2021 ◽  
Vol 17 ◽  
Author(s):  
Ke Huan ◽  
Li Tang ◽  
Dongmei Deng ◽  
Huan Wang ◽  
Xiaojing Si ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Cyclic Voltammetry ◽  
Photoelectron Spectroscopy ◽  
Chemical Structure ◽  
Pd Nanoparticles ◽  
Optimal Conditions ◽  
Potential Oscillation ◽  
X Ray Diffraction ◽  
X Ray

Background: Hydrogen peroxide (H2O2) is a common reagent in the production and living, but excessive H2O2 may enhance the danger to the human body. Consequently, it is very important to develop economical, fast and accurate techniques for detecting H2O2. Methods: A simple two-step electrodeposition process was applied to synthesize Pd-Cu/Cu2O nanocomposite for non-enzymatic H2O2 sensor. Cu/Cu2O nanomaterial was firstly electrodeposited on FTO by potential oscillation technique, and then Pd nanoparticles were electrodeposited on Cu/Cu2O nanomaterial by cyclic voltammetry. The chemical structure, component, and morphology of the synthesized Pd-Cu/Cu2O nanocomposite were characterized by X-ray diffraction, scanning electron microscopy and X-ray photoelectron spectroscopy. The electrochemical properties of Pd-Cu/Cu2O nanocomposite were studied by cyclic voltammetry and amperometry. Results: Under optimal conditions, the as-fabricated sensor displayed a broad linear range (5-4000 µM) and low detection limit (1.8 µM) for the determination of H2O2. The proposed sensor showed good selectivity and reproducibility. Meanwhile, the proposed sensor has been successfully applied to detect H2O2 in milk. Conclusion: The Pd-Cu/Cu2O/FTO biosensor exhibits excellent electrochemical activity for H2O2 reduction, which has great potential application in the field of food safety.

scholarly journals Nanostructured, mesoporous Au/TiO2 model catalysts – structure, stability and catalytic properties

2011 ◽  
Vol 2 ◽  
pp. 593-606 ◽  
Author(s):  
Matthias Roos ◽  
Dominique Böcking ◽  
Kwabena Offeh Gyimah ◽  
Gabriela Kucerova ◽  
Joachim Bansmann ◽  
...  
Keyword(s):  
Thin Film ◽  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Model Catalysts ◽  
Model Systems ◽  
Structure Stability ◽  
Titanium Tetraisopropoxide ◽  
X Ray ◽  
Film Model ◽  
Thin Film Model

Aiming at model systems with close-to-realistic transport properties, we have prepared and studied planar Au/TiO2 thin-film model catalysts consisting of a thin mesoporous TiO2 film of 200–400 nm thickness with Au nanoparticles, with a mean particle size of ~2 nm diameter, homogeneously distributed therein. The systems were prepared by spin-coating of a mesoporous TiO2 film from solutions of ethanolic titanium tetraisopropoxide and Pluronic P123 on planar Si(100) substrates, calcination at 350 °C and subsequent Au loading by a deposition–precipitation procedure, followed by a final calcination step for catalyst activation. The structural and chemical properties of these model systems were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N2 adsorption, inductively coupled plasma ionization spectroscopy (ICP–OES) and X-ray photoelectron spectroscopy (XPS). The catalytic properties were evaluated through the oxidation of CO as a test reaction, and reactivities were measured directly above the film with a scanning mass spectrometer. We can demonstrate that the thin-film model catalysts closely resemble dispersed Au/TiO2 supported catalysts in their characteristic structural and catalytic properties, and hence can be considered as suitable for catalytic model studies. The linear increase of the catalytic activity with film thickness indicates that transport limitations inside the Au/TiO2 film catalyst are negligible, i.e., below the detection limit.

Structural and Catalytic Properties of the Alkali Metal Ion-Exchanged Y-Zeolites by 29Si and 27Al Solid-State NMR and FT-IR Spectroscopy

2005 ◽  
Vol 277-279 ◽  
pp. 708-719
Author(s):  
Chang Seop Lee ◽  
Hee Jung Lee ◽  
Sung Woo Choi ◽  
Jahun Kwak ◽  
Charles H.F. Peden
Keyword(s):  
Solid State ◽  
Alkali Metal ◽  
Photoelectron Spectroscopy ◽  
Metal Ion ◽  
Nmr Spectra ◽  
Catalytic Properties ◽  
Nox Reduction ◽  
29Si Nmr ◽  
Y Zeolites ◽  
X Ray

A series of cation exchanged Y-zeolites were prepared by exchanging cations with various alkali (M+, M= Li, Na, K, Cs) metals. The structural and catalytic properties of the alkali metal exchanged Y-zeolites have been investigated by a number of analytical techniques. Comparative elemental analyses were determined by an Energy Dispersive Spectroscopy X-ray (EDS), X-ray Photoelectron Spectroscopy (XPS), Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES) and X-ray Fluorescence (XRF) before and after cation substitution. The framework and non-framework Al coordination and the Si/Al ratios of the Y-zeolites were investigated by MAS Solid-State Nuclear Magnetic Resonance (NMR) spectroscopy. The Al NMR spectra were characterized by two 27Al resonance signals at 12 and 59 ppm, indicating the presence of the non-framework and framework Al respectively. The intensities of these resonances were used to monitor the amount of the framework and non-framework Al species in the series of exchanged zeolites. The 29Si NMR spectra were characterized by four resonance signals at -79, -84, -90, and -95 ppm. Changing the alkali metal cations in the exchanged Y-zeolites significantly altered the extent of the octahedral/tetrahedral coordination and the Si/Al ratio. The Fourier Transform Infrared spectra of the CO2 adsorbed on to the exchanged Y-zeolites showed a low frequency shift, as the atomic number of the exchanged alkali metal increased. In addition, the catalytic activity of these samples for NOx reduction were tested in combination with a non-thermal plasma technique and interpreted based on the above structural and spectroscopic information.

Extraordinary Stability of Structural and Electronic Properties of Tin Oxide Nanoparticles Formed by Soft Chemistry

2010 ◽  
Vol 75 ◽  
pp. 36-42 ◽  
Author(s):  
Marina Rumyantseva ◽  
Irina Zhurbina ◽  
Elena Varechkina ◽  
Siranuysh Badalyan ◽  
Alexander Gaskov ◽  
...  
Keyword(s):  
Optical Properties ◽  
Photoelectron Spectroscopy ◽  
Tin Dioxide ◽  
Hydrogen Reduction ◽  
Nitrogen Adsorption ◽  
Ammonia Solution ◽  
Adsorption Method ◽  
X Ray ◽  
Wet Chemical Synthesis ◽  
Tin Chloride

Powders of tin dioxide (SnO2) have been prepared by two different modifications of wet chemical synthesis, i.e. (i) by conventional hydrolysis of tin chloride dissolved in aqueous ammonia solution and (ii) by precipitation from tin chloride dissolved in aqueous hydrazine monohydrate (N2H4*H2O) solution. The prepared gels were dried and then annealed at different temperatures varied from 300 to 700 oC in order to form nanocrystals. Structure and optical properties of the samples were investigated by using X-ray diffraction, transmission electron microscopy, thermoprogrammable hydrogen reduction, low temperature nitrogen adsorption method, photoluminescence, infra-red absorption, Raman spectroscopy, and X-ray photoelectron spectroscopy. The samples prepared by hydrazine-based method are characterized by surface area about 127-188 m2/g with high sintering resistance. The optical spectroscopy data revealed pure crystallinity and high defect concentration for the samples prepared by hydrazine-based method. The experimental results are discussed in view of different states of chemisorbed oxygen on SnO2 nanocrystal surfaces, which determine electronic and optical properties of the prepared samples.

Catalytic Properties of Surfaces Sites on Metal Oxides and Their Characterization by X-Ray Photoelectron Spectroscopy

1974 ◽  
Author(s):  
R. G. Squires ◽  
L. F. Albright ◽  
W. N. Delgass ◽  
R. A. Walton ◽  
N. Winograd
Keyword(s):  
Metal Oxides ◽  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
X Ray

scholarly journals Surface Study of CuO Nanopetals by Advanced Nanocharacterization Techniques with Enhanced Optical and Catalytic Properties

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1298 ◽  
Author(s):  
Muhammad Arif Khan ◽  
Nafarizal Nayan ◽  
Shadiullah Shadiullah ◽  
Mohd Khairul Ahmad ◽  
Chin Fhong Soon
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Average Length ◽  
Tem Analysis ◽  
X Ray ◽  
Surface Study ◽  
Transmission Electron ◽  
One Step ◽  
Controlled Morphology ◽  
Xrd Patterns

In the present work, a facile one-step hydrothermal synthesis of well-defined stabilized CuO nanopetals and its surface study by advanced nanocharacterization techniques for enhanced optical and catalytic properties has been investigated. Characterization by Transmission electron microscopy (TEM) analysis confirmed existence of high crystalline CuO nanopetals with average length and diameter of 1611.96 nm and 650.50 nm, respectively. The nanopetals are monodispersed with a large surface area, controlled morphology, and demonstrate the nanocrystalline nature with a monoclinic structure. The phase purity of the as-synthesized sample was confirmed by Raman spectroscopy and X-ray diffraction (XRD) patterns. A significantly wide absorption up to 800 nm and increased band gap were observed in CuO nanopetals. The valance band (VB) and conduction band (CB) positions at CuO surface are measured to be of +0.7 and −1.03 eV, respectively, using X-ray photoelectron spectroscopy (XPS), which would be very promising for efficient catalytic properties. Furthermore, the obtained CuO nanopetals in the presence of hydrogen peroxide ( H 2 O 2 ) achieved excellent catalytic activities for degradation of methylene blue (MB) under dark, with degradation rate > 99% after 90 min, which is significantly higher than reported in the literature. The enhanced catalytic activity was referred to the controlled morphology of monodispersed CuO nanopetals, co-operative role of H 2 O 2 and energy band structure. This work contributes to a new approach for extensive application opportunities in environmental improvement.

scholarly journals Metal-Organic Framework MIL-101: Synthesis and Photocatalytic Degradation of Remazol Black B Dye

2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Pham Dinh Du ◽  
Huynh Thi Minh Thanh ◽  
Thuy Chau To ◽  
Ho Sy Thang ◽  
Mai Xuan Tinh ◽  
...  
Keyword(s):  
Photocatalytic Degradation ◽  
Photoelectron Spectroscopy ◽  
Metal Organic Framework ◽  
Nitrogen Adsorption ◽  
X Ray ◽  
Remazol Black B ◽  
Metal Organic ◽  
Degradation Reaction ◽  
Remazol Black ◽  
Organic Framework

In the present paper, the synthesis of metal-organic framework MIL-101 and its application in the photocatalytic degradation of Remazol Black B (RBB) dye have been demonstrated. The obtained samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption/desorption isotherms at 77 K. It was found that MIL-101 synthesized under optimal conditions exhibited high crystallinity and specific surface area (3360 m2·g-1). The obtained MIL-101 possessed high stability in water for 14 days and several solvents (benzene, ethanol, and water at boiling temperature). Its catalytic activities were evaluated by measuring the degradation of RBB in an aqueous solution under UV radiation. The findings show that MIL-101 was a heterogeneous photocatalyst in the degradation reaction of RBB. The mechanism of photocatalysis was considered to be achieved by the electron transfer from photoexcited organic ligands to metallic clusters in MIL-101. The kinetics of photocatalytic degradation reaction were analyzed by using the initial rate method and Langmuir-Hinshelwood model. The MIL-101 photocatalyst exhibited excellent catalytic recyclability and stability and can be a potential catalyst for the treatment of organic pollutants in aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document