scholarly journals Emerging nanoparticulate systems: Preparation techniques and stimuli responsive release characteristics

2019 ◽  
Vol 9 (8) ◽  
pp. 130-143 ◽  
Keyword(s):  
Stimuli Responsive ◽  
Preparation Techniques ◽  
Nanoparticulate Systems

A Freeze Shadow Technique for the Preparation of Soft Paint Latexes for Electron Microscopy

1977 ◽  
Vol 35 ◽  
pp. 314-315
Author(s):  
Earl R. Walter ◽  
Glen H. Bryant
Keyword(s):  
Sample Preparation ◽  
High Vacuum ◽  
Vacuum System ◽  
Latex Particles ◽  
New Methods ◽  
Diffusion Pump ◽  
Film Forming ◽  
Routine Basis ◽  
Distribution Studies ◽  
Preparation Techniques

With the development of soft, film forming latexes for use in paints and other coatings applications, it became desirable to develop new methods of sample preparation for latex particle size distribution studies with the electron microscope. Conventional latex sample preparation techniques were inadequate due to the pronounced tendency of these new soft latex particles to distort, flatten and fuse on the substrate when they dried. In order to avoid these complications and obtain electron micrographs of undistorted latex particles of soft resins, a freeze-dry, cold shadowing technique was developed. The method has now been used in our laboratory on a routine basis for several years.The cold shadowing is done in a specially constructed vacuum system, having a conventional mechanical fore pump and oil diffusion pump supplying vacuum. The system incorporates bellows type high vacuum valves to permit a prepump cycle and opening of the shadowing chamber without shutting down the oil diffusion pump. A baffeled sorption trap isolates the shadowing chamber from the pumps.

The ionic strength dependence of chromatin folding

1978 ◽  
Vol 36 (2) ◽  
pp. 220-221
Author(s):  
F. Thoma ◽  
TH. Koller
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Ionic Strength ◽  
Specimen Preparation ◽  
Preparation Technique ◽  
Carbon Supports ◽  
Ionic Strength Dependence ◽  
Chromatin Folding ◽  
Strength Dependence ◽  
Preparation Techniques

Under a variety of electron microscope specimen preparation techniques different forms of chromatin appearance can be distinguished: beads-on-a-string, a 100 Å nucleofilament, a 250 Å fiber and a compact 300 to 500 Å fiber.Using a standardized specimen preparation technique we wanted to find out whether there is any relation between these different forms of chromatin or not. We show that with increasing ionic strength a chromatin fiber consisting of a row of nucleo- somes progressively folds up into a solenoid-like structure with a diameter of about 300 Å.For the preparation of chromatin for electron microscopy the avoidance of stretching artifacts during adsorption to the carbon supports is of utmost importance. The samples are fixed with 0.1% glutaraldehyde at 4°C for at least 12 hrs. The material was usually examined between 24 and 48 hrs after the onset of fixation.

Electron Microscopic Observation of Biological Specimens in Their Native State by Employing Cryogenic Techniques

1972 ◽  
Vol 30 ◽  
pp. 410-411 ◽  
Author(s):  
Tokio Nei ◽  
Haruo Yotsumoto ◽  
Yoichi Hasegawa ◽  
Yuji Nagasawa
Keyword(s):  
Electron Microscopic Observation ◽  
Surface Structures ◽  
Specimen Preparation ◽  
Native State ◽  
Electron Microscopic ◽  
Biological Specimen ◽  
Specimen Holder ◽  
Cold Stage ◽  
Preparation Techniques ◽  
Scanning Electron

In order to observe biological specimens in their native state, that is, still containing their water content, various methods of specimen preparation have been used, the principal two of which are the chamber method and the freeze method.Using its recently developed cold stage for installation in the pre-evacuation chamber of a scanning electron microscope, we have succeeded in directly observing a biological specimen in its frozen state without the need for such conventional specimen preparation techniques as drying and metallic vacuum evaporation. (Echlin, too, has reported on the observation of surface structures using the same freeze method.)In the experiment referred to herein, a small sliced specimen was place in the specimen holder. After it was rapidly frozen by freon cooled with liquid nitrogen, it was inserted into the cold stage of the specimen chamber.

High-Resolution Scanning Electron Microscopy of Biological Specimens

1988 ◽  
Vol 46 ◽  
pp. 186-187
Author(s):  
M. Müller ◽  
R. Hermann
Keyword(s):  
High Resolution ◽  
Freeze Drying ◽  
Room Temperature ◽  
Structural Information ◽  
Freeze Substitution ◽  
Critical Point Drying ◽  
Sem Study ◽  
Major Factors ◽  
Structural Preservation ◽  
Preparation Techniques

Three major factors must be concomitantly assessed in order to extract relevant structural information from the surface of biological material at high resolution (2-3nm).Procedures based on chemical fixation and dehydration in graded solvent series seem inappropriate when aiming for TEM-like resolution. Cells inevitably shrink up to 30-70% of their initial volume during gehydration; important surface components e.g. glycoproteins may be lost. These problems may be circumvented by preparation techniques based on cryofixation. Freezedrying and freeze-substitution followed by critical point drying yields improved structural preservation in TEM. An appropriate preservation of dimensional integrity may be achieved by freeze-drying at - 85° C. The sample shrinks and may partially collapse as it is warmed to room temperature for subsequent SEM study. Observations at low temperatures are therefore a necessary prerequisite for high fidelity SEM. Compromises however have been unavoidable up until now. Aldehyde prefixation is frequently needed prior to freeze drying, rendering the sample resistant to treatment with distilled water.

SEM Evaluation of Fluoride Pretreatment Effects on Acid-Etching of Caries-Like Enamel Lesions In Vitro

1981 ◽  
Vol 39 ◽  
pp. 474-475
Author(s):  
M. John Hicks
Keyword(s):  
Dental Enamel ◽  
Preventive Measure ◽  
Acid Etching ◽  
Distilled Water ◽  
Adhesive Resin ◽  
Fluoride Treatment ◽  
Treatment Groups ◽  
Pretreatment Effects ◽  
Preparation Techniques

Acid-etching of enamel surfaces has been performed routinely to bond adhesive resin materials to sound dental enamel as a caries-preventive measure. The effect of fluoride pretreatment on acid-etching of enamel has been reported to produce inconsistent and unsatisfactory etching patterns. The failure to obtain an adequate etch has been postulated to be due to fluoride precipitation products deposited on the enamel surface. The purpose of this study was to evaluate the effects of fluoride pretreatment on acid-etching of carieslike lesions of human dental enamel.Caries-like lesions of enamel were created in vitro on human molar and premolar teeth. The teeth were divided into two fluoride treatment groups. The specimens were exposed for 4 minutes to either a 2% Sodium Fluoride (NaF) solution or a 10% Stannous Fluoride (SnF2) solution. The specimens were then washed in deionized-distilled water. Each tooth was sectioned into four test regions. This was carried out to compare the effects of various time exposures (0 to 2 minutes) and differing concentrations (10 to 60% w/w) of phosphoric acid (H3PO4) on etching of caries-like lesions. Standard preparation techniques for SEM were performed on the specimens.

Cryomicroscopy of multiphase latices

1991 ◽  
Vol 49 ◽  
pp. 1060-1061
Author(s):  
O. L. Shaffer ◽  
M.S. El-Aasser ◽  
C. L. Zhao ◽  
M. A. Winnik ◽  
R. R. Shivers
Keyword(s):  
Electron Microscopy ◽  
Radiation Damage ◽  
Freeze Fracture ◽  
Particle Morphology ◽  
Second Stage ◽  
Transmission Electron ◽  
Important Approach ◽  
Carbon Coated ◽  
Preparation Techniques

Transmission electron microscopy is an important approach to the characterization of the morphology of multiphase latices. Various sample preparation techniques have been applied to multiphase latices such as OsO4, RuO4 and CsOH stains to distinguish the polymer phases or domains. Radiation damage by an electron beam of latices imbedded in ice has also been used as a technique to study particle morphology. Further studies have been developed in the use of freeze-fracture and the effect of differential radiation damage at liquid nitrogen temperatures of the latex particles embedded in ice and not embedded.Two different series of two-stage latices were prepared with (1) a poly(methyl methacrylate) (PMMA) seed and poly(styrene) (PS) second stage; (2) a PS seed and PMMA second stage. Both series have varying amounts of second-stage monomer which was added to the seed latex semicontinuously. A drop of diluted latex was placed on a 200-mesh Formvar-carbon coated copper grid.

Scanning tunneling microscopy of E. coli RNA polymerase deposited onto an Au substrate by an electrochemical process

1991 ◽  
Vol 49 ◽  
pp. 378-379
Author(s):  
Rebecca W. Keller ◽  
Carlos Bustamante ◽  
David Bear
Keyword(s):  
Scanning Tunneling Microscope ◽  
Biological Sample ◽  
Substrate Surface ◽  
Electrochemical Process ◽  
Atomic Resolution ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Tunneling Microscope ◽  
E Coli ◽  
Preparation Techniques

Under ideal conditions, the Scanning Tunneling Microscope (STM) can create atomic resolution images of different kinds of samples. The STM can also be operated in a variety of non-vacuum environments. Because of its potentially high resolution and flexibility of operation, it is now being applied to image biological systems. Several groups have communicated the imaging of double and single stranded DNA.However, reproducibility is still the main problem with most STM results on biological samples. One source of irreproducibility is unreliable sample preparation techniques. Traditional deposition methods used in electron microscopy, such as glow discharge and spreading techniques, do not appear to work with STM. It seems that these techniques do not fix the biological sample strongly enough to the substrate surface. There is now evidence that there are strong forces between the STM tip and the sample and, unless the sample is strongly bound to the surface, it can be swept aside by the tip.

Advanced TEM sample preparation techniques for submicron Si devices

1995 ◽  
Vol 53 ◽  
pp. 516-517 ◽  
Author(s):  
P. B. Basham ◽  
H. L. Tsai
Keyword(s):  
Sample Preparation ◽  
Process Development ◽  
Light Transmission ◽  
Specific Area ◽  
Turnaround Time ◽  
Small Hole ◽  
Area Of Interest ◽  
Transmission Electron ◽  
Polished Side ◽  
Preparation Techniques

The use of transmission electron microscopy (TEM) to support process development of advanced microelectronic devices is often challenged by a large amount of samples submitted from wafer fabrication areas and specific-spot analysis. Improving the TEM sample preparation techniques for a fast turnaround time is critical in order to provide a timely support for customers and improve the utilization of TEM. For the specific-area sample preparation, a technique which can be easily prepared with the least amount of effort is preferred. For these reasons, we have developed several techniques which have greatly facilitated the TEM sample preparation.For specific-area analysis, the use of a copper grid with a small hole is found to be very useful. With this small-hole grid technique, TEM sample preparation can be proceeded by well-established conventional methods. The sample is first polished to the area of interest, which is then carefully positioned inside the hole. This polished side is placed against the grid by epoxy Fig. 1 is an optical image of a TEM cross-section after dimpling to light transmission.

Electron Microscopy of Bacteriophage T7 Internal Head Proteins

1975 ◽  
Vol 33 ◽  
pp. 638-639
Author(s):  
P. Serwer
Keyword(s):  
Electron Microscopy ◽  
Bacteriophage T7 ◽  
Specimen Preparation ◽  
Dna Molecule ◽  
The Core ◽  
Internal Core ◽  
Phage T7 ◽  
T7 Phage ◽  
Preparation Techniques ◽  
Internal Head

The genome of bacteriophage T7 is a duplex DNA molecule packaged in a space whose volume has been measured to be 2.2 x the volume of the B form of T7 DNA. To help determine the mechanism for packaging this DNA, the configuration of proteins inside the phage head has been investigated by electron microscopy. A core which is roughly cylindrical in outline has been observed inside the head of phage T7 using three different specimen preparation techniques.When T7 phage are treated with glutaraldehyde, DNA is ejected from the head often revealing an internal core (dark arrows in Fig. 1). When both the core and tail are present in a particle, the core appears to be coaxial with the tail. Core-tail complexes sometimes dislodge from their normal location and appear attached to the outside of a phage head (light arrow in Fig. 1).

Sign in / Sign up

Export Citation Format

Share Document