scholarly journals Structural strength of cancellous specimens from bovine femur under cyclic compression

PeerJ ◽  
2016 ◽  
Vol 4 ◽  
pp. e1562 ◽  
Author(s):  
Kaori Endo ◽  
Satoshi Yamada ◽  
Masahiro Todoh ◽  
Masahiko Takahata ◽  
Norimasa Iwasaki ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Yield Stress ◽  
Bone Strength ◽  
Cancellous Bone ◽  
Structural Model ◽  
Volume Fraction ◽  
Bone Structure ◽  
Micro Computed Tomography ◽  
Bone Volume Fraction ◽  
Structural Deterioration

The incidence of osteoporotic fractures was estimated as nine million worldwide in 2000, with particular occurrence at the proximity of joints rich in cancellous bone. Although most of these fractures spontaneously heal, some fractures progressively collapse during the early post-fracture period. Prediction of bone fragility during progressive collapse following initial fracture is clinically important. However, the mechanism of collapse, especially the gradual loss of the height in the cancellous bone region, is not clearly proved. The strength of cancellous bone after yield stress is difficult to predict since structural and mechanical strength cannot be determineda priori. The purpose of this study was to identify whether the baseline structure and volume of cancellous bone contributed to the change in cancellous bone strength under cyclic loading. A total of fifteen cubic cancellous bone specimens were obtained from two 2-year-old bovines and divided into three groups by collection regions: femoral head, neck, and proximal metaphysis. Structural indices of each 5-mm cubic specimen were determined using micro-computed tomography. Specimens were then subjected to five cycles of uniaxial compressive loading at 0.05 mm/min with initial 20 N loading, 0.3 mm displacement, and then unloading to 0.2 mm with 0.1 mm displacement for five successive cycles. Elastic modulus and yield stress of cancellous bone decreased exponentially during five loading cycles. The decrease ratio of yield stress from baseline to fifth cycle was strongly correlated with bone volume fraction (BV/TV,r= 0.96,p< 0.01) and structural model index (SMI,r= − 0.81,p< 0.01). The decrease ratio of elastic modulus from baseline to fifth cycle was also correlated with BV/TV (r= 0.80,p< 0.01) and SMI (r= − 0.78,p< 0.01). These data indicate that structural deterioration of cancellous bone is associated with bone strength after yield stress. This study suggests that baseline cancellous bone structure estimated from adjacent non-fractured bone contributes to the cancellous bone strength during collapse.

Prediction of Mechanical Properties of the Cancellous Bone of the Mandibular Condyle

2003 ◽  
Vol 82 (10) ◽  
pp. 819-823 ◽  
Author(s):  
L.J. van Ruijven ◽  
E.B.W. Giesen ◽  
M. Farella ◽  
T.M.G.J. van Eijden
Keyword(s):  
Mechanical Properties ◽  
Cancellous Bone ◽  
Volume Fraction ◽  
Bone Structure ◽  
Structural Parameters ◽  
Mandibular Condyle ◽  
Element Model ◽  
Micro Computed Tomography ◽  
Bone Volume Fraction ◽  
Apparent Stiffness

The mechanical properties of cancellous bone depend on the bone structure. The present study examined the extent to which the apparent stiffness of the cancellous bone of the human mandibular condyle can be predicted from its structure. Two models were compared. The first, a structure model, used structural parameters such as bone volume fraction and anisotropy to estimate the apparent stiffness. The second was a finite element model (FEM) of the cancellous bone. The bone structure was characterized by micro-computed tomography. The calculated stiffnesses of 24 bone samples were compared with measured stiffnesses. Both models could predict 89% of the variation in the measured stiffnesses. From the stiffness approximated by FEM in combination with the measured stiffness, the stiffness of the bone tissue was estimated to be 11.1 ± 3.2 GPa. It was concluded that both models could predict the stiffness of cancellous bone with adequate accuracy.

Misalignment Error in Cancellous Bone Apparent Elastic Modulus Depends on Bone Volume Fraction and Degree of Anisotropy

2020 ◽  
Vol 143 (2) ◽  
Author(s):  
Matthew B. L. Bennison ◽  
A. Keith Pilkey ◽  
W. Brent Lievers
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Cancellous Bone ◽  
Volume Fraction ◽  
Experimental Studies ◽  
Bone Volume ◽  
Bone Volume Fraction ◽  
Skeletal Site ◽  
Degree Of Anisotropy ◽  
Misalignment Error

Abstract Cancellous bone is an anisotropic structure with architectural and mechanical properties that vary due to both skeletal site and disease state. This anisotropy means that, in order to accurately and consistently measure the mechanical properties of cancellous bone, experiments should be performed along the primary mechanical axis (PMA), that is, the orientation in which the mechanical properties are at their maximum value. Unfortunately, some degree of misalignment will always be present, and the magnitude of the resulting error is expected to be architecture dependent. The goal of this work is to quantify the dependence of the misalignment error, expressed in terms of change in apparent elastic modulus (ΔE), on both the bone volume fraction (BV/TV) and the degree of anisotropy (DA). Finite element method (FEM) models of bovine cancellous bone from five different skeletal sites were created at 5 deg and 20 deg from the PMA determined for each region. An additional set of models was created using image dilation/erosion steps in order to control for BV/TV and better isolate the effect of DA. Misalignment error was found to increase with increasing DA and decreasing BV/TV. At 5 deg misaligned from the PMA, error is relatively low (&lt;5%) in all cases but increases to 8–24% error at 20 deg. These results suggest that great care is needed to avoid introducing misalignment error into experimental studies, particularly when studying regions with high anisotropy and/or low bone volume fraction, such as vertebral or osteoporotic bone.

scholarly journals Targeted ablation of the PTH/PTHrP receptor in osteocytes impairs bone structure and homeostatic calcemic responses

2011 ◽  
Vol 209 (1) ◽  
pp. 21-32 ◽  
Author(s):  
William F Powell ◽  
Kevin J Barry ◽  
Irena Tulum ◽  
Tatsuya Kobayashi ◽  
Stephen E Harris ◽  
...  
Keyword(s):  
Volume Fraction ◽  
Bone Structure ◽  
Micro Computed Tomography ◽  
Bone Volume Fraction ◽  
Blood Calcium ◽  
Low Calcium Diet ◽  
Exon 1 ◽  
Skeletal Homeostasis ◽  
Pthrp Receptor

Parathyroid hormone (PTH) is a major physiologic regulator of calcium, phosphorous, and skeletal homeostasis. Cells of the osteoblastic lineage are key targets of PTH action in bone, and recent evidence suggests that osteocytes might be important in the anabolic effects of PTH. To understand the role of PTH signaling through the PTH/PTHrP receptors (PPR) in osteocytes and to determine the role(s) of these cells in mediating the effects of the hormone, we have generated mice in which PPR expression is specifically ablated in osteocytes. Transgenic mice in which the 10 kb-Dmp1 promoter drives a tamoxifen-inducible Cre-recombinase were mated with animals in which exon 1 of PPR is flanked by lox-P sites. In these animals, osteocyte-selective PPR knockout (Ocy-PPRcKO mice) could be induced by administration of tamoxifen. Histological analysis revealed a reduction in trabecular bone and mild osteopenia in Ocy-PPRcKO mice. Reduction of trabeculae number and thickness was also detected by micro-computed tomography analysis whereas bone volume fraction (BV/TV%) was unchanged. These findings were associated with an increase in Sost and sclerostin expression. When Ocy-PPRcKO mice were subjected to a low-calcium diet to induce secondary hyperparathyroidism, their blood calcium levels were significantly lower than littermate controls. Moreover, PTH was unable to suppress Sost and sclerostin expression in the Ocy-PPRcKO animals, suggesting an important role of PTH signaling in osteocytes for proper bone remodeling and calcium homeostasis.

scholarly journals Structure-Function Relationships of the Vertebral Endplate

2021 ◽  
Author(s):  
Yuanqiao Wu ◽  
Elise Feng-i Morgan ◽  
Johnfredy Loaiza ◽  
Rohin Banerji ◽  
Olivia Rose Blouin
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Yield Stress ◽  
Volume Fraction ◽  
Level Density ◽  
Micro Computed Tomography ◽  
Vertebral Endplate ◽  
Mineral Density ◽  
Bone Volume Fraction ◽  
Apparent Stiffness

Background: Although deformation and fracture of the vertebral endplate have been implicated in spinal conditions such as vertebral fracture and disc degeneration, few biomechanical studies of this structure are available. The goal of this study was to quantify the mechanical behavior of the vertebral endplate. Methods: Eight-five rectangular specimens were dissected from the superior and/or inferior central endplates of human lumbar spine segments L1-L4. Micro-computed tomography (μCT) imaging, four-point-bend testing, and ashing were performed to quantify the apparent elastic modulus and yield stress (modulus and yield stress, respectively, of the porous vertebral endplate), tissue yield stress (yield stress of the tissue of the vertebral endplate, excluding pores), ultimate strain, fracture strain, bone volume fraction (BV/TV), bone mineral density (BMD), and various measures of tissue density and composition (tissue mineral density, ash fraction, and ash density). Regression was used to assess the dependence of mechanical properties on density and composition. Results: Wide variations in elastic and failure properties, and in density and tissue composition, were observed. BMD and BV/TV were good predictors of many of the apparent-level mechanical properties, including modulus, yield stress, and in the case of the inferior vertebral endplate, failure strains. Similar values of the mechanical properties were noted between superior and inferior vertebral endplates. In contrast to the dependence of apparent stiffness and strength on BMD and BV/TV, none of the mechanical properties depended on any of the tissue-level density measurements. Conclusion: The dependence of many of the mechanical properties of the vertebral endplate on BV/TV and BMD suggests possibilities for non-invasive assessment of how this region of the spine behaves during habitual and injurious loading. Further study of the non-mineral components of the endplate tissue is required to understand how the composition of this tissue may influence the overall mechanical behavior of the vertebral endplate.

scholarly journals Pancreas deficiency modifies bone development in the ovine fetus near term

2021 ◽  
Author(s):  
Stuart A Lanham ◽  
Dominique Blache ◽  
Richard Oc Oreffo ◽  
Abigail L Fowden ◽  
Alison J Forhead
Keyword(s):  
Mechanical Strength ◽  
Volume Fraction ◽  
Bone Structure ◽  
Plasma Concentrations ◽  
In Utero ◽  
Micro Computed Tomography ◽  
Bone Volume Fraction ◽  
Fetal Sheep ◽  
Trabecular Thickness ◽  
Near Term

Hormones have an important role in the regulation of fetal growth and development, especially in response to nutrient availability in utero. Using micro-computed tomography and an electromagnetic 3-point bend test, this study examined the effect of pancreas removal at 0.8 fraction of gestation on the developing bone structure and mechanical strength in fetal sheep. When fetuses were studied at 10 and 25 days after surgery, pancreatectomy caused hypoinsulinaemia, hyperglycaemia and growth retardation which was associated with low plasma concentrations of leptin and a marker of osteoclast activity and collagen degradation. In pancreatectomised fetuses compared to control fetuses, limb lengths were shorter and trabecular bone in the metatarsi showed greater bone volume fraction, trabecular thickness, degree of anisotropy and porosity, and lower fractional bone surface area and trabecular spacing. Mechanical strength testing showed that pancreas deficiency was associated with increased stiffness and a greater maximal weight load at fracture in a subset of fetuses studied near term. Overall, pancreas deficiency in utero slowed growth of the fetal skeleton and adapted the developing bone to generate a more compact and connected structure. Maintenance of bone strength in growth-retarded limbs is especially important in a precocial species in preparation for skeletal loading and locomotion at birth.

Changed Morphology and Mechanical Properties of Cancellous Bone in the Mandibular Condyles of Edentate People

2004 ◽  
Vol 83 (3) ◽  
pp. 255-259 ◽  
Author(s):  
E.B.W. Giesen ◽  
M. Ding ◽  
M. Dalstra ◽  
T.M.G.J. van Eijden
Keyword(s):  
Mechanical Properties ◽  
Cancellous Bone ◽  
Regression Models ◽  
Volume Fraction ◽  
Mechanical Load ◽  
Micro Computed Tomography ◽  
Bone Morphology ◽  
Bone Volume Fraction ◽  
Fundamental Relationship ◽  
Morphology And Mechanical Properties

Since edentate subjects have a reduced masticatory function, it can be expected that the morphology of the cancellous bone of their mandibular condyles has changed according to the altered mechanical environment. In the present study, the morphology of cylindrical cancellous bone specimens of the mandibular condyles of edentate subjects (n = 25) was compared with that of dentate subjects (n = 24) by means of micro-computed tomography and by the application of Archimedes’ principle. Stiffness and strength were determined by destructive mechanical testing. Compared with dentate subjects, it appeared that, in edentate subjects, the bone was less dense and the trabecular structure was less plate-like. The regression models of stiffness and strength built from bone volume fraction and the trabecular orientation relative to the axis of the specimen were similar for both dentate and edentate subjects. This indicates that, under reduced mechanical load, the fundamental relationship between bone morphology and mechanical properties does not change.

scholarly journals Etoricoxib decreases mouse subchondral bone mass and biomechanical properties in early osteoarthritis

2020 ◽  
Author(s):  
Bo Liu ◽  
Chen-Chen Ji ◽  
Yi-Jie Shao ◽  
Ting Liang ◽  
Jia-Heng He ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Subchondral Bone ◽  
Structural Changes ◽  
Sham Group ◽  
Volume Fraction ◽  
Control Group ◽  
Micro Computed Tomography ◽  
Bone Volume Fraction ◽  
Trabecular Thickness ◽  
Early Oa

Abstract BackgroundEtoricoxib, a selective Cyclooxygenase-2 (COX-2) inhibitor, is commonly used in osteoarthritis (OA) for pain relief. The purpose of our study was to investigate the effects of Etoricoxib on mouse subchondral bone in early OA.MethodsOA was induced via destabilization of the medial meniscus (DMM) in C57BL/6J mice. After surgery, the mice were randomly and equally divided into five groups: a sham-operated control group (Sham group), an osteoarthritis (OA) group (DMM group), an OA treated with Etoricoxib 5mg/kg (DMM+E5) group, an OA treated with Etoricoxib 10mg/kg (DMM+E10) group, and an OA treated with Etoricoxib 20mg/kg (DMM+E20) group. Mice in the Sham group and DMM group were injected with a similar dose of vehicle (40% ethyl alcohol–saline solution). Four weeks after treatment, mice were euthanized. Micro computed tomography (Mirco-CT) analysis, Safranin O-Fast Green staining, hematoxylin and eosin (HE) staining were performed to evaluate morphological and structural changes. In addition, atomic force microscopy (AFM) analysis was performed to evaluate changes in the elastic modulus. Furthermore, changes in microstructure were detected by scanning electron microscopy (SEM).ResultsEtoricoxib inhibited osteophyte formation in the subchondral bone. However, it also reduced the bone volume fraction (BV/TV), lowered trabecular thickness (Tb.Th), and more microfractures and pores were observed in the subchondral bone. Moreover, Etoricoxib reduced the elastic modulus of subchondral bone. Furthermore, exposure to Etoricoxib further increased the empty/total osteocyte ratio of the subchondral bone. In cartilage and synovium, Etoricoxib did not significantly change the Osteoarthritis Research Society International (OARSI) score, the modified Mankin score, and the synovialitis-score versus the DMM group. ConclusionOur results demonstrate that although Etoricoxib can relieve the pain induced by OA, it also has adverse effects on subchondral bone in early OA.

scholarly journals Trabecular bone patterning in the hominoid distal femur

PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e5156 ◽  
Author(s):  
Leoni Georgiou ◽  
Tracy L. Kivell ◽  
Dieter H. Pahr ◽  
Matthew M. Skinner
Keyword(s):  
Trabecular Bone ◽  
Distal Femur ◽  
Volume Fraction ◽  
Reaction Force ◽  
Intraspecific Variability ◽  
Trabecular Structure ◽  
Trabecular Architecture ◽  
Micro Computed Tomography ◽  
Bone Volume Fraction ◽  
Distal Epiphysis

BackgroundIn addition to external bone shape and cortical bone thickness and distribution, the distribution and orientation of internal trabecular bone across individuals and species has yielded important functional information on how bone adapts in response to load. In particular, trabecular bone analysis has played a key role in studies of human and nonhuman primate locomotion and has shown that species with different locomotor repertoires display distinct trabecular architecture in various regions of the skeleton. In this study, we analyse trabecular structure throughout the distal femur of extant hominoids and test for differences due to locomotor loading regime.MethodsMicro-computed tomography scans ofHomo sapiens(n= 11),Pan troglodytes(n= 18),Gorilla gorilla(n= 14) andPongosp. (n= 7) were used to investigate trabecular structure throughout the distal epiphysis of the femur. We predicted that bone volume fraction (BV/TV) in the medial and lateral condyles inHomowould be distally concentrated and more anisotropic due to a habitual extended knee posture at the point of peak ground reaction force during bipedal locomotion, whereas great apes would show more posteriorly concentrated BV/TV and greater isotropy due to a flexed knee posture and more variable hindlimb use during locomotion.ResultsResults indicate some significant differences between taxa, with the most prominent being higher BV/TV in the posterosuperior region of the condyles inPanand higher BV/TV and anisotropy in the posteroinferior region inHomo. Furthermore, trabecular number, spacing and thickness differ significantly, mainly separatingGorillafrom the other apes.DiscussionThe trabecular architecture of the distal femur holds a functional signal linked to habitual behaviour; however, there was more similarity across taxa and greater intraspecific variability than expected. Specifically, there was a large degree of overlap in trabecular structure across the sample, andHomowas not as distinct as predicted. Nonetheless, this study offers a comparative sample of trabecular structure in the hominoid distal femur and can contribute to future studies of locomotion in extinct taxa.

Biomimetic composites inspired by venous leaf

2017 ◽  
Vol 52 (3) ◽  
pp. 361-372 ◽  
Author(s):  
Gongdai Liu ◽  
R Ghosh ◽  
A Vaziri ◽  
A Hossieni ◽  
D Mousanezhad ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Yield Stress ◽  
Poisson’S Ratio ◽  
Composite Structures ◽  
Volume Fraction ◽  
Matrix Material ◽  
Poisson's Ratio ◽  
Fiber Volume ◽  
Young’S Moduli

A typical plant leaf can be idealized as a composite having three principal fibers: the central mid-fiber corresponding to the mid-rib, straight parallel secondary fibers attached to the mid-fiber representing the secondary veins, and then another set of parallel fibers emanating from the secondary fibers mimicking the tertiary fibers embedded in a matrix material. This paper introduces a biomimetic composite design inspired by the morphology of venous leafs and investigates the effects of venation morphologies on the in-plane mechanical properties of the biomimetic composites using finite element method. The mechanical properties such as Young’s moduli, Poisson’s ratio, and yield stress under uniaxial loading of the resultant composite structures was studied and the effect of different fiber architectures on these properties was investigated. To this end, two broad types of architectures were used both having similar central main fiber but differing in either having only secondary fibers or additional tertiary fibers. The fiber and matrix volume fractions were kept constant and a comparative parametric study was carried out by varying the inclination of the secondary fibers. The results show that the elastic modulus of composite in the direction of main fiber increases linearly with increasing the angle of the secondary fibers. Furthermore, the elastic modulus is enhanced if the secondary fibers are closed, which mimics composites with closed cellular fibers. In contrast, the elastic modulus of composites normal to the main fiber ( x direction) exponentially decreases with the increase of the angle of the secondary fibers and it is little affected by having secondary fibers closed. Similar results were obtained for the yield stress of the composites. The results also indicate that Poisson’s ratio linearly increases with the secondary fiber angle. The results also show that for a constant fiber volume fraction, addition of various tertiary fibers may not significantly enhance the mechanical properties of the composites. The mechanical properties of the composites are mainly dominated by the secondary fibers. Finally, a simple model was proposed to predict these behaviors.

Quantitative micro-computed tomography analysis and rheological investigation of Nitrile rubber/Rockwool composites

2021 ◽  
pp. 002199832110338
Author(s):  
Elisson BD da Rocha ◽  
Ana Maria F de Sousa ◽  
Ana Lúcia N da Silva ◽  
Cristina RG Furtado ◽  
Marcos V Colaço ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Elastic Modulus ◽  
Aspect Ratio ◽  
Volume Fraction ◽  
Nitrile Rubber ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Rubber Composites ◽  
Ratio Data ◽  
Ct Analysis

This study reports the reinforcement degree investigation of two types of rockwool fibers (F1 and F2), in nitrile rubber composites. The micro-computed tomography (micro-CT) 3D images showed that both fibers were well-dispersed in the NBR matrix, without a preferential orientation. The micro-CT analysis also allowed quantifying volume fraction, inter-fiber distance, and aspect ratio. Those morphometric parameters were used for supporting the composites rheological behavior assessment. Changes in the elastic modulus and phase angle followed the same trend of the inter-fiber distance values, regardless the type of fiber. Both volume fraction and aspect ratio data from the micro-CT analysis were used to predict theoretical values of elastic modulus using the Guth-Gold and modified Guth-Gold equations, and the results obtained were compared to the rheological experimental data. This analysis was helpful to better understand the rockwool fibers reinforcement degree differences in the production of the nitrile rubber composites.

Sign in / Sign up

Export Citation Format

Share Document