Effect of Recycled Coarse Aggregate on the Compressive Strength and Modulus of Rupture of Concrete

2014 ◽  
Vol 4 (27) ◽  
pp. 4006-4013
Author(s):  
O. Orie ◽  
O. Orojo
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Modulus Of Rupture ◽  
Recycled Coarse Aggregate

scholarly journals The influence of recycled concrete aggregate on the properties of concrete

2018 ◽  
Vol 162 ◽  
pp. 02020 ◽  
Author(s):  
Nisreen Mohammed ◽  
Kaiss Sarsam ◽  
Mazin Hussien
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Modulus Of Rupture ◽  
Concrete Aggregate ◽  
Hardened Concrete ◽  
Recycled Coarse Aggregate ◽  
Natural Aggregates

Use of Recycled Coarse Aggregate (RCA) in concrete can be described in terms of environmental protection and economy. This paper deals with the mechanical properties of concrete compressive strength, splitting tensile strength, modulus of elasticity, and modulus of rupture. Three kinds of concrete mixtures were tested, concrete made with Natural Coarse Aggregate (NCA) as a control concrete and two types of concrete made with recycled coarse aggregate (50% and 100% replacement level of coarse recycled aggregate). These kinds of concrete were made with different targets of compressive strength of concrete f ’c (35MPa) and (70 MPa). Fifty specimens were tested of the fresh and hardened properties of concrete. The waste concrete from laboratory test cubes was crushed to produce the Recycled Coarse Aggregate used in recycled concrete. A comparative between the experimental results of the properties for fresh and hardened concrete is presented in the paper. Recycled aggregate concrete (RCA) had a satisfactory performance despite the replacement ratios. It was found using the size of Recycled Coarse Aggregate (RCA) of (5-14) mm has quite similar in performance with the same size of Natural Coarse Aggregate (NCA), it is necessary to use high quality of recycled concrete (with low levels of impurities). Recycled aggregate as an alternative to natural aggregates -seems quite successful.

scholarly journals Effect of Recycled Coarse Aggregate and Bagasse Ash on Two-Stage Concrete

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 556
Author(s):  
Muhammad Faisal Javed ◽  
Afaq Ahmad Durrani ◽  
Sardar Kashif Ur Rehman ◽  
Fahid Aslam ◽  
Hisham Alabduljabbar ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Coarse Aggregate ◽  
Construction Material ◽  
Strength Reduction ◽  
Recycled Aggregate ◽  
Two Stage ◽  
Conventional Concrete ◽  
Recycled Coarse Aggregate ◽  
Coarse Aggregates

Numerous research studies have been conducted to improve the weak properties of recycled aggregate as a construction material over the last few decades. In two-stage concrete (TSC), coarse aggregates are placed in formwork, and then grout is injected with high pressure to fill up the voids between the coarse aggregates. In this experimental research, TSC was made with 100% recycled coarse aggregate (RCA). Ten percent and twenty percent bagasse ash was used as a fractional substitution of cement along with the RCA. Conventional concrete with 100% natural coarse aggregate (NCA) and 100% RCA was made to determine compressive strength only. Compressive strength reduction in the TSC was 14.36% when 100% RCA was used. Tensile strength in the TSC decreased when 100% RCA was used. The increase in compressive strength was 8.47% when 20% bagasse ash was used compared to the TSC mix that had 100% RCA. The compressive strength of the TSC at 250 °C was also determined to find the reduction in strength at high temperature. Moreover, the compressive and tensile strength of the TSC that had RCA was improved by the addition of bagasse ash.

scholarly journals Carbonization Durability of Two Generations of Recycled Coarse Aggregate Concrete with Effect of Chloride Ion Corrosion

2020 ◽  
Vol 12 (24) ◽  
pp. 10544
Author(s):  
Chunhong Chen ◽  
Ronggui Liu ◽  
Pinghua Zhu ◽  
Hui Liu ◽  
Xinjie Wang
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Chloride Ion ◽  
Total Porosity ◽  
Recycled Concrete ◽  
Carbonation Depth ◽  
Aggregate Concrete ◽  
Recycled Coarse Aggregate ◽  
Carbonation Resistance ◽  
Two Generations

Carbonation durability is an important subject for recycled coarse aggregate concrete (RAC) applied to structural concrete. Extensive studies were carried out on the carbonation resistance of RAC under general environmental conditions, but limited researches investigated carbonation resistance when exposed to chloride ion corrosion, which is an essential aspect for reinforced concrete materials to be adopted in real-world applications. This paper presents a study on the carbonation durability of two generations of 100% RAC with the effect of chloride ion corrosion. The quality evolution of recycled concrete coarse aggregate (RCA) with the increasing recycling cycles was analyzed, and carbonation depth, compressive strength and the porosity of RAC were measured before and after chloride ion corrosion. The results show that the effect of chloride ion corrosion negatively affected the carbonation resistance of RAC, and the negative effect was more severe with the increasing recycling cycles of RCA. Chloride ion corrosion led to a decrease in compressive strength, while an increase in carbonation depth and the porosity of RAC. The equation of concrete total porosity and carbonation depth was established, which could effectively judge the deterioration of carbonation resistance of RAC.

Estimation of Compressive Strength of Recycled Aggregate High Strength Concrete Using Ultrasonic Pulse Velocity

2014 ◽  
Vol 605 ◽  
pp. 147-150
Author(s):  
Seong Uk Hong ◽  
Seung Hun Kim ◽  
Yong Taeg Lee
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
Coarse Aggregate ◽  
High Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Recycled Aggregate ◽  
Strength Concrete ◽  
Recycled Coarse Aggregate

This study used the ultrasonic pulse velocity method, one of the non-destructive test methods that does not damage the building for maintenance of to-be-constructed concrete structures using recycled aggregates in order to estimate the compressive strength of high strength concrete structure using recycled coarse aggregate and provide elementary resources for technological establishment of ultrasonic pulse velocity method. 200 test pieces of high strength concrete 40, 50MPa using recycled coarse aggregate were manufactured by replacement rates (0, 30, 50, 100%) and age (1, 7, 28, 180days), and air curing was executed to measure compressive strength and wave velocity. As the result of compressive strength measurement, the one with age of 180day and design strength of 40MPa was 43.69MPa, recycled coarse aggregate replacement rate of 30% 50% 100% were 42.82, 41.22, 37.35MPa, and 50MPa was 52.50MPa, recycled coarse aggregate replacement rate of 30% 50% 100% were 49.02, 46.66, 45.30MPa, and while it could be seen that the test piece substituted with recycled aggregate was found to have lower strength than the test piece with natural aggregate only, but it still reached the design strength to a degree. The correlation of compressive strength and ultrasonic pulse velocity was found and regression analysis was conducted. The estimation formula for compressive strength of high strength concrete using recycled coarse aggregate was found to be Fc=0.069Vp4.05, R2=0.66

Compressive Strength of Artificial Sand Recycled Concrete with Different Content of Stone Powder

2014 ◽  
Vol 578-579 ◽  
pp. 464-468
Author(s):  
Wen Wu Lan ◽  
Rong Fu Zhong ◽  
Bo Lv ◽  
Jing Yan Gan ◽  
Jing Wei Ying
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Recycled Concrete ◽  
Concrete Mixture ◽  
Aggregate Concrete ◽  
Recycled Coarse Aggregate ◽  
Natural Aggregate ◽  
Different Content

This study examined the compressive behaviors of concrete with artificial sand that mixed with different content of stone powder (SP). Forty-five cubic specimens were prepared with two strength grades and five SP-content. Including 15 specimens (C35) of recycled coarse aggregate (RA) concrete with artificial sand (RCC35), 15 specimens (C45) of recycled coarse aggregate concrete with artificial sand (RCC45) and 15 specimens (C35) of natural aggregate concrete with artificial sand (NC35). The workability of concrete mixture and the compressive strength of the cubic specimens were tested. The results showed that the slump of concrete mixture decreased with the SP-content increased, and the coagulability and water retentivity of the concrete mixture were improved by using stone powder. The compressive strength of the concrete with artificial sand were increased by incorporating stone powder. The optimal SP-content of RCC35 and NC35 is 20%, while RCC45 is 10%.

scholarly journals Strength and abrasion performance of recycled aggregate based geopolymer concrete

2021 ◽  
Author(s):  
Asfaw Mekonnen LAKEW ◽  
Mukhallad M. AL-MASHHADANI ◽  
Orhan CANPOLAT
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
Coarse Aggregate ◽  
Steel Fiber ◽  
Splitting Tensile Strength ◽  
Partial Replacement ◽  
Geopolymer Concrete ◽  
Recycled Coarse Aggregate ◽  
One Year

This experimental work evaluated geopolymer concrete containing fly ash and slag by partial replacement of natural coarse aggregate (NCA) with recycled coarse aggregate (RCA) to manufacture environmental-friendly concrete. The proportion of recycled aggregates considered consists of 10%, 20%, 30%, and 40% of the total coarse aggregate amount. Also, a steel fiber ratio of 0.3% was utilized. The mechanical properties and abrasion resistance of fly ash/slag-based geopolymer concrete were then assessed. Majorly, the mechanical strength of the concrete samples decreased by the increase of RCA content. The geopolymer concrete with 40% RCA gave 28.3% lesser compressive strength and 24% lower splitting tensile strength than NCA concrete at one year. Also, the flexural strength of concrete specimens was reduced by 35% (from 5.34MPa to 3.5MPa) with the incorporation of 40% RCA. The incorporation of 30% RCA caused 23% and 22.6% reduction in compressive strength at 56 days and one year, respectively. The flexural and splitting tensile strength of the specimens was not significantly reduced (less than 10%) with the inclusion of a recycled coarse aggregate ratio of up to 30%. Furthermore, the abrasion wear thickness of every concrete sample was less than 1mm. RCA inclusion of 20% produced either insignificant reduction or better strength results compared to reference mixtures. As a result, it was considered that the combination of 0.3% steel fiber and 20% recycled coarse aggregate in fly ash/slag-based geopolymer concrete leads to an eco-friendly concrete mix with acceptable short and long-term engineering properties that would lead to sustainability in concrete production and utilization sector.

scholarly journals Mechanical and Structural Properties of a Lightweight Concrete with Different Types of Recycling Coarse Aggregate

2019 ◽  
Vol 26 (1) ◽  
pp. 33-40
Author(s):  
Muyasser M. Jomaa’h ◽  
Baraa Thaer Kamil ◽  
Omer S. Baghabra
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
High Efficiency ◽  
Coarse Aggregate ◽  
Splitting Tensile Strength ◽  
Modulus Of Rupture ◽  
Unit Weight ◽  
Dry Density ◽  
Total Density

The light of the world’s technological development in the construction field and the continuous need to apply of a high-efficiency building materials because old methods is no longer is used after the advent of the solutions that characterized by fast applications and maximum protection in addition to reducing costs and increase the sustainability of the establishment and its design age. The lightweights of various installations are an urgent need to decrease the dead loads. Therefore, this study is specie locally focus on replacing the normal coarse aggregate with lightweight coarse aggregate (claystone (bonza), rubber, thermostone and polystyrene) in various volumetric ratios of (25, 50 and 75) % in addition to a preparation reference mix. For the purpose identifying and studying the important specifications the new concrete which contributes to the self-load reduction of the concrete by reducing the total density of the mixture, were prepared models of cylinders and standard prisms, to evaluate the compressive strength and the splitting tensile strength respectively, Also the modulus of rupture and the unit weight, where carried out. The results tests indicated that a drop in the mechanical properties of the concrete with increasing the lightweight coarse aggregate , mechanical properties values : compressive strength , rupture modulus, splitting tensile strength and flexural strength were between (10.66-28.99) MPa (1.122-3.372) MPa, (3.606-6.83) MPa and (20.101-25.874)MPa compared with a reference mixes (38.44MPa), (3.969MPa), (10.476MPa) and (26.940)MPa respectively for mixes of (25, 50 and75)% with different light coarse aggregate , also the values of an oven dry density were between (1665.5-2287.58)kg/m3 compared with reference mixes (2426.41kg/m³). The best concrete mix was (M7, M10) of low density (1598.4 kg/m3) and (1580.4) kg /m3 and the compression strength within the permissible limits (15.47) MPa.

scholarly journals The Mechanical Properties of Recycled Coarse Aggregate Concrete with Lithium Slag

2019 ◽  
Vol 2019 ◽  
pp. 1-12
Author(s):  
Yongjun Qin ◽  
Jiejing Chen ◽  
Zhenxing Li ◽  
Yabin Zhang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Substitution Rate ◽  
Industrial Waste ◽  
Coarse Aggregate ◽  
Measured Intensity ◽  
Recycled Coarse Aggregate ◽  
Intensity Index ◽  
Axial Compressive Strength ◽  
Lithium Slag

Using recycled coarse aggregate (RCA) to replace natural pebbles and using lithium slag (LS) from industrial waste to replace cement in order to improve the mechanical properties of concrete and solve environmental problems. In this study, the effects of different substitution rates of RCA (0, 30%, 50%, and 70%) and different LS contents (0, 10%, 15%, 20%, and 25%) on the mechanical properties of concrete were investigated. The main results indicate that when the substitution rate of RCA is 30% and the LS content is 20%, optimal cube compressive strength, axial compressive strength, and elastic modulus can be achieved, with an increase of 9.90%, 48.22%, and 9.94% respectively; when the substitution rate of RCA is 70% and the LS content is 20%, the splitting tensile strength and flexural strength can be improved by 9.90% and 48.22%, respectively. The morphology of RCA concrete specimens with LS was observed with a scanning electron microscope (SEM). Moreover, corrections were made to improve the relevant formula according to the differences between the measured intensity index and data converted from current specifications.

Sign in / Sign up

Export Citation Format

Share Document