scholarly journals Effect of Process Variables on the Transesterification Process of Palm Oil Sludge to Biodiesel

2019 ◽  
pp. 1-14
Author(s):  
O. A. Aworanti ◽  
A. O. Ajani ◽  
S. E. Agarry ◽  
K. A. Babatunde ◽  
O. D. Akinwunmi
Keyword(s):  
Reaction Time ◽  
Palm Oil ◽  
Research Work ◽  
Acid Value ◽  
Biodiesel Production ◽  
Oil Sludge ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Optimum Process ◽  
Process Variables

In this research work, the optimum process variables (catalyst, methanol to oil ratio and reaction time) for transesterification of palm oil sludge (POS) to biodiesel were studied. The transesterification process was carried by mixture of palm oil sludge, methanol and catalyst with the help of magnetic stirrer at 300 rpm and at temperature of 60ºC. The catalyst used for the process was potassium hydroxide (KOH). One-Factor-at-A-Time was used to select the possible optimum levels of process variable that gives high biodiesel yield. The study was evaluated by five levels  of methanol-to-oil ratio (1:1 – 12:1), catalyst (0.1- 2%) and reaction time (30 – 150 min).The optimum process variables for transesterification of palm oil sludge (POS) to achieved maximum biodiesel yield  were found to be methanol to oil molar ratio of 12:1, catalyst loading of 1.5wt% and reaction time of 30 min. At this optimum conditions the maximum biodiesel yield was 61.2%. The biodiesel produced from transesterification of palm oil sludge was characterized in order to determine the properties of the product. The density of POS is 857.0 kg/m3, kinematic viscosity of 5.38 mm2/s, flash point of 180°C, pour point of -5°C, and Acid value of 0.17 mgKOH/g. The biodiesel produced from transesterification of palm oil sludge meets the EN 14214 and ASTM 6751 standard. Thus, this study will be helpful to determine an efficient and economical procedure for biodiesel production from non-edible raw materials with high free fatty acid.

Calcium Methoxide Synthesis from Quick Lime Using as Solid Catalyst in Refined Palm Oil Biodiesel Production

2013 ◽  
Vol 834-836 ◽  
pp. 550-554 ◽  
Author(s):  
Warakom Suwanthai ◽  
Vittaya Punsuvon ◽  
Pilanee Vaithanomsat
Keyword(s):  
Palm Oil ◽  
Acid Methyl Ester ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Solid Catalyst ◽  
Solid Base ◽  
Quick Lime ◽  
X Ray ◽  
Refined Palm Oil

In this research, calcium methoxide was synthesized as solid base catalyst from quick lime for biodiesel production. The catalyst was further characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflection fourier transform (ATR-FTIR) and Energy-dispersive X-ray spectroscopies (EDX) to evaluate its performance. The transesterification of refined palm oil using calcium methoxide and the process parameters affecting the fatty acid methyl ester (FAME) content such as catalyst concentration, methanol:oil molar ratio and reaction time were investigated. The results showed that the FAME content at 97% was achieved within 3 h using 3 %wt catalyst loading, 12:1 methanol:oil molar ratio and 65 °C reaction temperature. The result of FAME suggested calcium methoxide was the promising solid catalyst for substitution of the conventional liquid catalyst.

Natural Hydroxyapatite (NHAp) Derived from Pork Bone as a Renewable Catalyst for Biodiesel Production via Microwave Irradiation

2015 ◽  
Vol 659 ◽  
pp. 216-220 ◽  
Author(s):  
Achanai Buasri ◽  
Thaweethong Inkaew ◽  
Laorrut Kodephun ◽  
Wipada Yenying ◽  
Vorrada Loryuenyong
Keyword(s):  
Reaction Time ◽  
Microwave Power ◽  
Raw Materials ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Animal Bone ◽  
Natural Hydroxyapatite

The use of waste materials for producing biodiesel via transesterification has been of recent interest. In this study, the pork bone was used as the raw materials for natural hydroxyapatite (NHAp) catalyst. The calcination of animal bone was conducted at 900 °C for 2 h. The raw material and the resulting heterogeneous catalyst were characterized using X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method. The effects of reaction time, microwave power, methanol/oil molar ratio, catalyst loading and reusability of catalyst were systematically investigated. The optimum conditions, which yielded a conversion of oil of nearly 94%, were reaction time 5 min and microwave power 800 W. The results indicated that the NHAp catalysts derived from pork bone showed good reusability and had high potential to be used as biodiesel production catalysts under microwave-assisted transesterification of Jatropha Curcas oil with methanol.

Optimization of melon oil methyl ester production using response surface methodology

2017 ◽  
Vol 2 (1) ◽  
pp. 1-10 ◽  
Author(s):  
O. S. Aliozo ◽  
L. N. Emembolu ◽  
O. D. Onukwuli
Keyword(s):  
Response Surface Methodology ◽  
Reaction Time ◽  
Methyl Ester ◽  
Response Surface ◽  
Research Work ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Central Composite Designs ◽  
American Society

Abstract In this research work, melon oil was used as feedstock for methyl ester production. The research was aimed at optimizing the reaction conditions for methyl ester yield from the oil. Response surface methodology (RSM), based on a five level, four variable central composite designs (CCD)was used to optimize and statistically analyze the interaction effect of the process parameter during the biodiesel production processes. A total of 30 experiments were conducted to study the effect of methanol to oil molar ratio, catalyst weight, temperature and reaction time. The optimal yield of biodiesel from melon oil was found to be 94.9% under the following reaction conditions: catalyst weight - 0.8%, methanol to oil molar ratio - 6:1, temperature - 55°C and reaction time of 60mins. The quality of methyl ester produced at these conditions was within the American Society for Testing and Materials (ASTM D6751) specification.

Hybrid Approach for Optimizing Process Parameters in Biodiesel Production from Palm Oil

2020 ◽  
Vol 834 ◽  
pp. 16-23
Author(s):  
Pongchanun Luangpaiboon ◽  
Pasura Aungkulanon
Keyword(s):  
Reaction Time ◽  
Process Parameters ◽  
Reaction Temperature ◽  
Palm Oil ◽  
Hybrid Approach ◽  
Maximum Yield ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Optimization Approach ◽  
Influential Parameters

Biodiesel was synthesized from direct transesterification of palm oil reacted with methanol in the presence of a suitable catalyst. There is a sequence of three consecutive reversible reactions for the transesterification process. These process parameters were optimized via the hybrid optimization approach of a conventional response surface method and artificial intelligence mechanisms from Sine Cosine and Thermal Exchange Optimization metaheuristics. The influential parameters and their combined interaction effects on the transesterification efficiency were established through a factorial designed experiments. In this study, the influential parameters being optimized to obtain the maximum yield of biodiesel were reaction temperature of 60–150°C, reaction time of 1–6 hours, methanol to oil molar ratio of 6:1–12:1 mol/mol and weight of catalyst of 1–10wt. %. On the first phase, the analysis of variance (ANOVA) revealed the reaction time as the most influential parameter on biodiesel production. Based on the experimental results from the hybrid algorithm via the SCO, it was concluded that the optimal biodiesel yield for the transesterification of palm oil were found to be 100°C for reaction temperature, 4 hours for reaction time, 10:1 wt/wt of ratio methanol to oil and 8% of weight of catalyst with 92.15% and 90.97% of biodiesel yield for expected and experimental values, respectively.

scholarly journals Reutealis Trisperma Oil Esterification: Optimization and Kinetic Study

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1513
Author(s):  
Riky Lim ◽  
Deog-Keun Kim ◽  
Jin-Suk Lee
Keyword(s):  
Kinetic Study ◽  
High Reliability ◽  
Acid Value ◽  
Ion Exchange Resin ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Order Model ◽  
Marginal Lands ◽  
Central Composite

Reutealis trisperma, due to its high kernel-oil yield (±50%) and long productivity (±70 years), is considered to be a promising feedstock for biodiesel production. In addition, this plant, which can thrive on marginal lands, is classified as a non-edible oil since it contains a toxin known as eleostearic acid. The present study aimed to optimize the esterification step in biodiesel production from R.trisperma oil catalyzed using sulfonic ion exchange resin Lewatit K2640. The optimization step was performed using a response surface methodology through the incorporation of a central composite design. A kinetic study was performed as well, based on the assumption of a pseudo-homogeneous second-order model. Catalyst loading was found to have the most significant impact on acid value, followed by temperature and methanol-to-oil molar ratio. The optimal conditions for the esterification step were 92 °C temperature, 5.34% catalyst loading, and 5.82:1 methanol-to-oil molar ratio. The acid value and FFA conversion of R.trisperma oil under these conditions were 2.49 mg KOH/g and 91.75%, respectively. The kinetics study revealed that the constructed model could fit the experimental data well with relatively high reliability. The activation energy required for the esterification of R.trisperma oil was 33.2 kJ/mol.

scholarly journals Optimization of Biodiesel Production Using Nanomagnetic CaO-Based Catalysts with Subcritical Methanol Transesterification of Rubber Seed Oil

Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 230 ◽  
Author(s):  
Veronica Winoto ◽  
Nuttawan Yoswathana
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
Acid Methyl Ester ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Optimum Conditions ◽  
Rubber Seed Oil ◽  
Box Behnken Design ◽  
Rubber Seed

The molar ratio of methanol to rubber seed oil (RSO), catalyst loading, and the reaction time of RSO biodiesel production were optimized in this work. The response surface methodology, using the Box–Behnken design, was analyzed to determine the optimum fatty acid methyl ester (FAME) yield. The performance of various nanomagnetic CaO-based catalysts—KF/CaO-Fe3O4, KF/CaO-Fe3O4-Li (Li additives), and KF/CaO-Fe3O4-Al (Al additives)—were compared. Rubber seed biodiesel was produced via the transesterification process under subcritical methanol conditions with nanomagnetic catalysts. The experimental results indicated that the KF/CaO-Fe3O4-Al nanomagnetic catalyst produced the highest FAME yield of 86.79%. The optimum conditions were a 28:1 molar ratio of methanol to RSO, 1.5 wt % catalyst, and 49 min reaction time. Al additives of KF/CaO-Fe3O4 nanomagnetic catalyst enhanced FAME yield without Al up to 18.17% and shortened the reaction time by up to 11 min.

Optimization and effects of process variables on the production and properties of methyl ester biodiesel

2014 ◽  
Vol 25 (2) ◽  
pp. 39-47 ◽  
Author(s):  
Andrew C. Eloka-Eboka ◽  
Ogbene Gillian Igbum ◽  
Freddie L. Inambao
Keyword(s):  
Reaction Time ◽  
Methyl Ester ◽  
Methyl Esters ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Individual Response ◽  
Process Variables ◽  
Biodiesel Fuels ◽  
High Yields ◽  
General Response

Optimization of the production process in biodiesel production holds huge prospects. A reduced cost option is the optimization of process variables that affect yields and purity of biodiesel, which was achieved in this study. Optimized production and direct effects of process variables on the production and quality of methyl ester biodiesel fuels from the non-edible seed oils of sandbox seed was carried out. Catalyst nature and concentration, alcohol to triglyceride molar ratio, mixing speed, reaction time and temperature were taken into consideration as variables to their individual response on the yields, viscosity and specific gravity of the methyl esters produced. These are specific indispensable properties of biodiesel for use in compression ignition engines. Optimized concentrations were 0.3 to 1.5% w/v and two mole ratios of 3:1 and 6:1. Time of reaction was varied (5mins to 30mins) with temperatures (38oC and 55oC). Also, the effect of methanol in the range of 4:1and 6:1 (molar ratio) was investigated, keeping catalyst type, reaction time and temperatures constant. The effects of KOH and NaOH on the transesterification were investigated with concentration kept constant at 1%. The general response in this study was that at optimized rate of agitation (800rpm), optimized reaction time was as low as 5minutes, 1% catalyst concentration of NaOH was the optimal concentration, and 55oC was the optimal temperature with attendant high yields. However, there are variations with the nature of feedstock as the work further exposed. These high points are particularly of interest to guide against process backdrop.

scholarly journals Multi-Feedstocks Biodiesel Production from Esterification of Calophyllum inophyllum Oil, Castor Oil, Palm Oil and Waste Cooking Oil

2020 ◽  
Vol 9 (1) ◽  
pp. 119-123
Author(s):  
H Hadiyanto ◽  
Apsari Puspita Aini ◽  
Widayat Widayat ◽  
Kusmiyati Kusmiyati ◽  
Arief Budiman ◽  
...  
Keyword(s):  
Vegetable Oils ◽  
Palm Oil ◽  
Ricinus Communis ◽  
Acid Value ◽  
Waste Cooking Oil ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Calophyllum Inophyllum ◽  
Cooking Oil

Biodiesel can be produced from various vegetable oils and animal fat. Abundant sources of vegetable oil in Indonesia, such as Calophyllum inophyllum, Ricinus communis, palm oil, and waste cooking oil, were used as raw materials. Multi-feedstock biodiesel was used to increase the flexibility operation of biodiesel production. This study was conducted to determine the effect of a combination of vegetable oils on biodiesel characteristics. Degumming and two steps of esterification were applied for high free fatty acid feedstock before trans-esterification in combination with other vegetable oils. Potassium hydroxide was used as a homogenous catalyst and methanol as another raw material. The acid value of C. inophyllum decreased from 54 mg KOH/gr oil to 2.15 mg KOH/gr oil after two steps of esterification. Biodiesel yield from multi-feedstock was 87.926% with a methanol-to-oil molar ratio of 6:1, temperature of 60 ℃, and catalyst of 1%wt. ©2020. CBIORE-IJRED. All rights reserved

scholarly journals Synthesis of Magnetic Base Catalyst from Industrial Waste for Transesterification of Palm Oil

2021 ◽  
Vol 17 (1) ◽  
pp. 53-64
Author(s):  
Shamala Gowri Krishnan ◽  
Fei-Ling Pua ◽  
Hong-Hua Lim
Keyword(s):  
Palm Oil ◽  
Industrial Waste ◽  
Catalytic Performance ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Impregnation Method ◽  
X Ray ◽  
Carbon Dioxide Co2

Industrial waste is produced in large amounts annually; without proper planning, the waste might cause a serious threat to the environment. Hence, an industrial waste-based heterogeneous magnetic catalyst was synthesized using carbide lime waste (CLW) as raw material for biodiesel production via transesterification of palm oil. The catalyst was successfully synthesized by the one-step impregnation method and calcination at 600 °C. The synthesized catalyst, C-CLW/g-Fe2O3, was characterized by temperature-programmed desorption of carbon dioxide (CO2-TPD), scanning electron microscopy (SEM), electron dispersive X-ray spectroscopy (EDX), X-ray Diffraction (XRD), Brunauer-Emmett-Teller (BET), vibrating sample magnetometer (VSM), and Fourier transform infrared spectroscopy (FT-IR). The catalyst has a specific surface area of 18.54 m2/g and high basicity of 3,637.20 µmol/g. The catalytic performance shows that the optimum reaction conditions are 6 wt% catalyst loading, 12:1 methanol to oil molar ratio with the reaction time of 3 h at 60 °C to produce 90.5% biodiesel yield. The catalyst exhibits good catalytic activity and magnetism, indicating that the CLW can be a potential raw material for catalyst preparation and application in the biodiesel industry. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Esterification Deacidification of Zanthoxylum Bungeanum Seed Oil

2012 ◽  
Vol 512-515 ◽  
pp. 1615-1618
Author(s):  
Jian Zhang ◽  
Xuan Jun Wang
Keyword(s):  
Sulfuric Acid ◽  
Reaction Time ◽  
Seed Oil ◽  
Acid Value ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
One Step ◽  
Acid Catalyzed ◽  
Zanthoxylum Bungeanum ◽  
Acid Esterification

Effects of mole rate of methanol/oil, reaction time and technology on the free fatty acid ( FFA) level decrease of Zanthoxylum bungeanum seed oil with sulfuric acid as catalyst was investigated. Results show that, the acid level decreases with the mole rate of methanol/oil increases when the sulfuric acid is 2% based on the weight of Zanthoxylum bungeanum seed oil and reacting at 60°C for 2h. When the mole rate is 20~35∶1, the final acid value is less than 2mgKOH/g which meets the requirement for biodiesel production. When the mole rate is 25∶1, with sulfuric acid dosage 2% and reacting at 60°C, the acid value decreases fast at the beginning of the acid esterification. The acid value of ZSO was reduced to 1.56 mg KOH/g from 78.91 mg KOH/g by only one-step acid-catalyzed esterification with methanol-to-oil molar ratio 30:1, H2SO4 2%, temperature 60°C and reaction time 60 min, which was selected as optimum for the acid-catalyzed esterification.

Sign in / Sign up

Export Citation Format

Share Document