scholarly journals Pattern of Capsule and Seed Development in Sesame (Sesamum indicum L.) as Influenced by Seed Priming

2020 ◽  
pp. 1-7
Author(s):  
Utpal Biswas ◽  
Rupa Das ◽  
Amitava Dutta
Keyword(s):  
Polyethylene Glycol ◽  
Seed Development ◽  
Seed Weight ◽  
Seed Priming ◽  
Quality Parameters ◽  
Steady Increase ◽  
Peg 6000 ◽  
Yield And Quality ◽  
Main Plot ◽  
Days After Anthesis

Aim: To study the influence of seed priming on the pattern of capsule and seed development in sesame. Place and Duration of Study: The field experiment was conducted during the pre kharif seasons of 2017-2018 and 2018-2019 in sesame variety Savitri at AB Block farm, Bidhan Chandra Krishi Viswavidyalaya, Kalyani, Nadia, West Bengal, India. Methodology: Experiment was laid out in split plot design with 3 replications. Ten schedules of seed priming viz T1 (KNO3 @ 10 mM), T2 (KNO3 @ 20 mM), T3 (KNO3 @ 50 mM), T4 (KH2PO4 @ 50 mM), T5 (KH2PO4 @ 100 mM),T6 (KH2PO4 @ 200 mM), T7 [Polyethylene glycol (PEG) 6000 @ -0.4 MPa], T8 [Polyethylene glycol (PEG) 6000 @ -0.3 MPa], T9 [Polyethylene glycol (PEG) 6000 @ -0.2 MPa], T10 Distilled water (Hydro priming) along with control T11 (Dry seed) were taken as main plot treatment and stage of harvest was considered as sub plot treatment. The pattern of capsule and seed development was studied at 10 days after anthesis (DAA), 20 days after anthesis (DAA), 30 days after anthesis (DAA), 40 days after anthesis (DAA) and 50 days after anthesis (DAA) interval. Ten plants from each replication and in each treatment were selected at random to record data on morphological and physiological characters. Results: Fresh capsule length, fresh capsule breadth, fresh capsule weight, fresh seed weight and dry seed weight showed a steady increase up to 40 days after anthesis (DAA) then decreased slowly up to maturity. Conclusion: Considering seed yield and quality parameters, T7 [Polyethylene glycol (PEG) 6000 @ -0.4 MPa] and T9 [Polyethylene glycol (PEG) 6000 @ -0.2 MPa] appears to be ideal among the treatments for quality seed production in sesame.

scholarly journals Impact of foliar nutrient sprays, crop and spatial manipulation on seed yield of Callistephus chinensis (L.) Nees

2019 ◽  
Vol 48 (1) ◽  
pp. 123-127
Author(s):  
Muneeb Ahmad Wani ◽  
Ambreena Din ◽  
FU Khan ◽  
Raiz Ahmed Lone ◽  
Gazanfer Gani ◽  
...  
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Quality Parameters ◽  
Planting Density ◽  
Apical Bud ◽  
Yield And Quality ◽  
Foliar Nutrient ◽  
Plant Densities ◽  
China Aster

An attempt was made to study the effect of pinching, plant densities and foliar nutrient sprays on seed yield and quality parameters in China aster cv. Powder puff. The experiment comprised of two levels of pinching (P0 = No pinching, P1 = Pinching), three planting densities (D1 = 30 plants m-2, D2 = 36 plants m-2 and D3 = 42 plants m-2) and three levels of commercial nutrient sprays (S1= 3 sprays, S2= 4 sprays and S3 = 5 sprays), constituting a total of 18 treatment combinations replicated thrice in randomized complete block design (RCBD). Pinching at visible bud stage, significantly increased 1000 seed weight (2.18 g) and seed yield (490.85 kg/ha), Increasing the planting density resulted in increased seed yield (485.55 kg/ha) and 1000 seed weight (2.05 g). On the other hand, 4 and 5 nutrient sprays significantly improved seed yield (463.12 kg/ha-) and 1000 seed weight (1.95 g). The results from the study suggest that increased branching with apical bud removal, wider planting space and 4 to 5 foliar applications of multi-nutrient sprays, significantly improves seed yield and quality attributes of transplanted China aster. While suggesting the best combination of pinching, spacing and nutrient sprays, the economics of flower production was duly considered.

Effect of Priming Techniques on Seed Germination Characteristics of C. Maxima Duch

2011 ◽  
Vol 474-476 ◽  
pp. 36-39 ◽  
Author(s):  
Yong Dong Sun ◽  
Xin Zheng Li ◽  
He Lian Yang ◽  
Li Sun
Keyword(s):  
Polyethylene Glycol ◽  
Seed Germination ◽  
Seed Priming ◽  
Distilled Water ◽  
Nacl Solution ◽  
Peg 6000 ◽  
Germination Process ◽  
Germination Characteristics ◽  
Successful Technique

The present study was conducted to investigate the effect of seed priming techniques on germination characteristics of C. maxima Duch. cultivar (Beiguan). Treatments were combinations of 3 levels of priming (distilled water, NaCl and PEG6000) and non-priming (control) with 3 replications. Concentrations of NaCl solution were 50, 100, 150, 200 mmol•L-1, and polyethylene glycol (PEG) 6000 were 10%, 20%, 30%, 40%, respectively. Seeds were primed using the above priming materials for 24 hours at 20°C in the dark, respectively. The results showed that different priming techniques could have various effects on germination of Beiguan seeds. Hydropriming (distilled water), NaCl priming and PEG6000 priming (10%) all improved the germination characteristics of Beiguan, compared to the control. NaCl priming was more effective than hydropriming and PEG6000 priming and was the most successful technique in this study. These findings indicated that seed priming techniques could accelerate germination process and were simple and cheap, we should propose these methods to farmers.

scholarly journals Effects of Osmopriming on Germination and Vigour Traits of Bersim Clover (Trifolium alexandrinum L.)

2010 ◽  
Vol 2 (4) ◽  
pp. 59-63 ◽  
Author(s):  
Hossein Reza ROUHI ◽  
Reza Tavakkol AFSHARI ◽  
Seyed Amir MOOSAVI ◽  
Mohammad Hossain GHARINEH
Keyword(s):  
Polyethylene Glycol ◽  
Osmotic Potential ◽  
Seed Priming ◽  
Control Group ◽  
Trifolium Alexandrinum ◽  
Distilled Water ◽  
Peg 6000 ◽  
Crop Establishment ◽  
Germination Characteristics ◽  
Polyethylene Glycol 6000

Previous studies suggested that fast and uniform germination is important for good crop establishment. The present study was conducted to investigate the possibility of increasing germination characteristics by seed priming techniques. An experiment was conducted with three replicates and two treatments including: 2 different priming duration (8 and 12 hours) and 6 osmotic potential of PEG 6000 solutions (-0.8, -1,-1.2,-1.4,-1.6 Mpa) and distilled water as a control group). The priming solutions were prepared using polyethylene glycol 6000 (PEG). Our results showed that the most effective osmotic potential in improving germination characteristics of Trifolium alexandrium is -0.8 MPa for 16 hours.

scholarly journals Ameliorative Effect of Seed Priming on Germination, Vigour Index and Tolerance Index against Short Term Moisture Stress in Maize (Zea mays L.)

2020 ◽  
Author(s):  
V. Singh ◽  
M. Sharma ◽  
H. Upadhyay ◽  
A. Siddique
Keyword(s):  
Polyethylene Glycol ◽  
Seed Priming ◽  
Moisture Stress ◽  
Magnesium Nitrate ◽  
Tolerance Index ◽  
Short Term ◽  
Seed Vigour ◽  
Peg 6000 ◽  
Vigour Index ◽  
Polyethylene Glycol 6000

An experiment was carried out to evaluate the effect of seed priming with magnesium nitrate salt against the moisture stress condition induced by Polyethylene glycol-6000 on seed germination, vigour index and tolerance index in root and shoot. Polyethylene glycol-6000 was used to create short term moisture stress under laboratory conditions while the seed priming was carried out by using magnesium nitrate. The percent germination, seed vigour index and tolerance index were started to decline from T1 to T4 (i.e. set first 1.5 and 4.5 % of PEG-6000 solution + none primed seed) while the results of second set (i.e. PEG-6000 + primed seed from T5 to T8) were also following the same decreasing trend along with improvement in every parameters. The germination was recorded highest 100 percent in T5 (i.e. 1.5% PEG-6000+ primed seed) followed by T6, T1 and T7 (T6 and T7 is 2.5% and 3.5 % PEG-6000+ primed seed) while the control set recorded 98.7% at final date of observations i.e. 240 Hrs. vigour index and tolerance index was also decreasing in both the set of treatments but PEG-600 + primed seed showed better results as compared to the treatments PEG-6000 + none primed. Tolerance index percent was recorded maximum in root as compare to shoot at 120 hrs. of intervals while the reverse result was recorded at 240 hrs. of intervals.

scholarly journals Growth, Yield, Seed and Seedling Quality Parameters of Rapeseed-mustard Varieties under Different Seed Priming Options

2020 ◽  
pp. 1-14
Author(s):  
Rupa Das ◽  
Saikat Biswas ◽  
Utpal Biswas ◽  
Amitava Dutta
Keyword(s):  
Seed Yield ◽  
West Bengal ◽  
Laboratory Data ◽  
Winter Season ◽  
Growth Yield ◽  
Seed Priming ◽  
Quality Parameters ◽  
Seedling Quality ◽  
Growth And Yield ◽  
Peg 6000

Rationale: Crop production and quality of produce get affected by drought, stand establishment and low availability of nutrients. Apart from various prevailing methods, seed treatment through priming now-a-days has been found to noticeably improve crop establishment for increasing seed yield and quality. Aim: To study the effect of various seed priming options on rapeseed-mustard varieties. Place of Study: A field experiment was conducted at AB Block Farm, Bidhan Chandra Krishi Viswavidyalaya, Kalyani, Nadia, West Bengal, India during winter season of 2017-2018. Methodology: Experiment comprised six rapeseed-mustard varieties (Anushka, Sanchita, TBM-143,TBM-204, Kranti and Pusa Bold) in main plot and five seed priming options (KH2PO4 @ 0.15 mol 100 ml water-1 5 g seeds-1, KNO3 @ 0.1 mol 100 ml water-1 5 g seeds-1, PEG 6000 @ -0.3 MPa 100 ml water-1 5 g seeds-1, hydro priming @ 100 ml 5 g seeds-1 and control) in subplot, replicated thrice in a split plot design. Observations on growth and yield contributing parameters were recorded from the field. Further, various quality parameters of seed and seedlings were evaluated in the laboratory. Data on all the parameters were finally statistically analyzed. Results: Among the varieties, Pusa Bold performed better in terms of growth, yield contributing parameters and seed yield under seed priming through either KH2PO4 @ 0.15 mol 100 ml water-1 5 g seeds-1 or PEG 6000 @ -0.3 MPa 100 ml water-1 5 g seeds-1. Seed and seedling quality parameters such as root and shoot lengths, seedling fresh and dry weights, germination % and vigour index were also improved under the same. Conclusion: Cultivation of mustard variety, Pusa Bold by seed priming through any of those two chemicals (KH2PO4 or PEG 6000) can be recommended for New alluvial zone of West Bengal, India.

scholarly journals Determination of Criteria and Drought Tolerance of Prope-Legitimate Cocoa Seed Through Polyethylene Glycol Induction

2020 ◽  
Vol 36 (2) ◽  
pp. 120-130
Author(s):  
Maera Zasari ◽  
Agung Wahyu Susuilo ◽  
Ade Wachjar ◽  
Sudarsono Sudarsono
Keyword(s):  
Polyethylene Glycol ◽  
Seed Germination ◽  
Selection Criteria ◽  
Plant Materials ◽  
Peg 6000 ◽  
Drought Tolerant ◽  
Germination Ability ◽  
Main Plot ◽  
Susceptible Group

The availability of drought tolerant rootstock becomes one of solution to obtain tolerant cocoa clone at drought condition. The production of rootstock is easier and faster by using prope-legitimate seeds as plant materials. Seed germination selection phase can accelerate the obtainment of tolerant cocoa rootstocks. The tolerance trait of prope-legitimate seeds can be determined by seed germination on media induced by polyethylene glycol (PEG) solution. To determine the tolerant seeds, it is effective by using a specific character as selection criteria. This study aimed to obtain criteria and selection character to determine droughttolerant characteristic of prope-legitimate seed through PEG 6000 induction in the germination phase. The research was conducted at the Agronomy Laboratoryof the Indonesian Coffee and Cocoa Research Institute, Jember, East Java, Indonesia, used split plot design with five replications as experimental design. The main plot was solution of 0% and 6% PEG 6000, while the subplot were prope-legitimate seeds of 13 cocoa clones. The result showed that germination ability and sprout fresh weight were suitable as selection criteria to determine tolerant characteristic of prope-legitimate seeds to drought stress. Based on the value of  tress susceptible index and clustering analysis, the tested prope-legitimate seeds were divided into three groups. The group of tolerant genotype consisted of Sca 06, while the group of medium tolerant were ICCRI 03, Sulawesi 02, KW 641, TSH 858, KEE 02, Sulawesi 03, and KW 617. The susceptible group consisted of six genotypes, namely ICS 60, KKM 22, KW 516, Sulawesi 01, and MCC 02. 

scholarly journals Stevia rebaudiana (Bert) Bertoni: influence of osmotic stress and seed priming on seed germination under laboratory conditions

2017 ◽  
Vol 39 (3) ◽  
pp. 379 ◽  
Author(s):  
Keila Regina Hossa ◽  
José Walter Pedroza Carneiro ◽  
Terezinha Aparecida Guedes ◽  
Alessandro Lucca Braccini
Keyword(s):  
Polyethylene Glycol ◽  
Seed Germination ◽  
Osmotic Stress ◽  
Stevia Rebaudiana ◽  
Seed Priming ◽  
Initial Time ◽  
Peg 6000 ◽  
Bedding Plants ◽  
Normal Seedling ◽  
First Results

 The foremost factor necessary for plant growers cultivating large acreages of Stevia rebaudiana (Bert) Bertoni is the production of qualitative bedding plants. The objective of this study was to evaluate the influence of osmotic-priming on the uniformity of seed germination. First, we evaluated the percentage of normal seedlings from two seed samples harvested in 2011 and 2012. The seeds harvested in 2012 produced 71.4% normal seedlings and thus they were used in the next experiments. The seeds were subjected to osmotic stress using five concentrations of polyethylene glycol (PEG-6000) at -0.2, -0.4, -0.6, -0.8, and -1.0 MPa in contrast with distilled water. Based on these first results, only -0.8 and -1.0 MPa were evaluated in the third experiment. The seeds were immersed in both concentrations of polyethylene glycol (PEG-6000) for imbibing at 20ºC for four, five, six, and seven days. Thereafter, we evaluated the time to the first normal seedling (Ti), time to the last normal seedling (Tf), percentage normal seedlings at the initial time (Pi) and percentage of normal seedlings at the end of every treatment (Pf). Osmotic priming increased the percentage of normal seedlings of the Stevia rebaudiana and reduced the time to the first and last germination events. 

Sign in / Sign up

Export Citation Format

Share Document