scholarly journals Comparative Study of Three Solar Drying Methods of Adensonia digitate L. (Baobab Leaves using Drying Kinetics and Empirical Drying Models)

2021 ◽  
pp. 77-85
Author(s):  
S. A. Okaiyeto ◽  
Nathaniel Oji ◽  
Y. A. Unguwanrimi
Keyword(s):  
Comparative Study ◽  
Mixed Mode ◽  
Moisture Diffusivity ◽  
Drying Methods ◽  
Solar Drying ◽  
Drying Time ◽  
Effective Moisture ◽  
Solar Dryer ◽  
Drying Models ◽  
On Farm

A comparative study of three drying methods of baobab leaves have been conducted and reported. Mixed mode solar drying, indirect mode solar drying and open sun drying of baobab leaves were conducted based on three drying models viz a viz Lewis,. Page and Henderson and Pabis models were employed in this research. Baobab leaves dried faster when dried under the mixed mode on-farm solar dryer. Drying time reduced considerably using the mixed mode on-farm solar dryer. Drying data were fitted into Lewis, Page and Henderson and Pabis models. Henderson and Pabis model (R2=0.9999, 0.9611, 0.9656; X2= 1.0297, 0.7931, 0.7710; RMSE= 0.5859, 0.6898, 0.6802 and MBE= -0.4.135, -0.4.231, -0.4176) gave the best prediction for the mixed mode drying). In the same way Henderson and Pabis model (R2=0.7450, 0.7699, 0.8243; X2= 1.9025, 0.4026, 0.2006; RMSE= 1.0684, 0.5181, 0.4058 and MBE= -0.8966, -0.3823, 0.2789) gave the best prediction for the indirect mode drying of baobab leaves. Effective moisture diffusivity of baobab leaves varied between -6.382 X 10-04 and -1.108 X 10-03 m2/s.

scholarly journals Effects of Blanching and Natural Convection Solar Drying on Quality Characteristics of Red Pepper (Capsicum annuum L.)

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
James Owusu-Kwarteng ◽  
Francis K. K. Kori ◽  
Fortune Akabanda
Keyword(s):  
Natural Convection ◽  
Quality Characteristics ◽  
Red Pepper ◽  
Plain Water ◽  
Drying Methods ◽  
Solar Drying ◽  
Drying Time ◽  
Sun Drying ◽  
Overall Acceptability ◽  
Solar Dryer

The objective of this work was to determine the effects of blanching and two drying methods, open-sun drying and natural convection solar drying, on the quality characteristics of red pepper. A 2 × 3 factorial design with experimental factors as 2 drying methods (open-sun drying and use of solar dryer) and 3 levels of pepper blanching (unblanched, blanched in plain water, and blanched in 2% NaCl) was conducted. Dried pepper samples were analysed for chemical composition, microbial load, and consumer sensory acceptability. Blanching of pepper in 2% NaCl solution followed by drying in a natural convection solar dryer reduced drying time by 15 hours. Similarly, a combination of blanching and drying in the solar dryer improved microbial quality of dried pepper. However, blanching and drying processes resulted in reduction in nutrients such as vitamin C and minerals content of pepper. Blanching followed by drying in natural convection solar dryer had the highest consumer acceptability scores for colour and overall acceptability, while texture and aroma were not significantly (p>0.05) affected by the different treatments. Therefore, natural convection solar dryer can be used to dry pepper with acceptable microbial and sensory qualities, as an alternative to open-sun drying.

scholarly journals Investigation of Solar Drying of Ginger (Zingiber officinale): Emprical Modelling, Drying Characteristics, and Quality Study

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
A. Waheed Deshmukh ◽  
Mahesh N. Varma ◽  
Chang Kyoo Yoo ◽  
Kailas L. Wasewar
Keyword(s):  
Energy Requirement ◽  
Initial Moisture Content ◽  
Food Preservation ◽  
Convective Drying ◽  
Drying Methods ◽  
Solar Drying ◽  
Drying Time ◽  
Drying Characteristics ◽  
Solar Dryer ◽  
Thin Layer Drying

Drying is a simultaneous heat and mass transfer energy intensive operation, widely used as a food preservation technique. In view of improper postharvest methods, energy constraint, and environmental impact of conventional drying methods, solar drying could be a practical, economical, and environmentally reliable alternative. In the present paper applicability of mixed mode solar cabinet dryer was investigated for drying of commercially important and export oriented ginger. Freshly harvested ginger slices were successfully dried from initial moisture content of 621.50 to 12.19% (d.b.) and their drying characteristics, quality parameters, and kinetics were evaluated. The results showed that present solar dryer could be successfully applied for drying of ginger in view of quality, reduced drying time, and zero energy requirement as compared to conventional open sun drying and convective drying techniques, respectively. Drying curves showed that drying occurred in falling rate period and no constant period was observed. The effective moisture diffusivity was determined by using Fick’s second law and found to be 1.789×10-9 m2/s. The drying data was fitted to five thin layer drying models and compared using statistical criteria. Page model was found to be most suitable to describe the drying kinetics of ginger in solar dryer under natural convection among the tested models.

scholarly journals Post-harvest treatment of algerian broad beans using two different solar drying methods

2018 ◽  
Author(s):  
A. Boubekri ◽  
S. Chouicha ◽  
M.H. Berbeuh ◽  
D. Mennouche ◽  
I. Frihi ◽  
...  
Keyword(s):  
Linear Regression Analysis ◽  
Convective Drying ◽  
Drying Methods ◽  
Solar Drying ◽  
Analysis Method ◽  
Drying Time ◽  
Broad Beans ◽  
Drying Models ◽  
Drying Curves ◽  
Experimental Trials

This work was carried up in the objective to valorize the broad beans, largely harvested in Algeria, by solar drying means. In the present research paper, an experimental study was conducted on solar drying of broad beans by two different methods. Experimental trials were performed on a direct and an indirect laboratory scale solar dryers at Ouargla university in the southern of Algeria. Selected samples were dried at 50°C, 55°C, 60°C and 65°C. In both two applied cases, drying curves were obtained and compared. Among twelve consulted drying models the Page model was correlated with satisfaction to describe the solar drying of broad beans using a non linear regression analysis method. Operating and thermal performances of the two used drying systems were checked by the energy effeceincy and economic calculation. Obtained results showed that the direct solar drying ensures good preservation of the final product with a drying time of 5 hours. Keywords: solar drying ;  convective drying ; broad bean ; quality 

scholarly journals Optimization and Prediction of the Drying and Quality of Turnip Slices by Convective-Infrared Dryer under Various Pretreatments by RSM and ANFIS Methods

Foods ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 284
Author(s):  
Ebrahim Taghinezhad ◽  
Mohammad Kaveh ◽  
Antoni Szumny
Keyword(s):  
Energy Efficiency ◽  
Color Difference ◽  
Moisture Diffusivity ◽  
Effective Moisture Diffusivity ◽  
Diffusivity Coefficient ◽  
Drying Process ◽  
Anfis Model ◽  
Drying Time ◽  
Effective Moisture ◽  
Response Variables

Drying can prolong the shelf life of a product by reducing microbial activities while facilitating its transportation and storage by decreasing the product weight and volume. The quality factors of the drying process are among the important issues in the drying of food and agricultural products. In this study, the effects of several independent variables such as the temperature of the drying air (50, 60, and 70 °C) and the thickness of the samples (2, 4, and 6 mm) were studied on the response variables including the quality indices (color difference and shrinkage) and drying factors (drying time, effective moisture diffusivity coefficient, specific energy consumption (SEC), energy efficiency and dryer efficiency) of the turnip slices dried by a hybrid convective-infrared (HCIR) dryer. Before drying, the samples were treated by three pretreatments: microwave (360 W for 2.5 min), ultrasonic (at 30 °C for 10 min) and blanching (at 90 °C for 2 min). The statistical analyses of the data and optimization of the drying process were achieved by the response surface method (RSM) and the response variables were predicted by the adaptive neuro-fuzzy inference system (ANFIS) model. The results indicated that an increase in the dryer temperature and a decline in the thickness of the sample can enhance the evaporation rate of the samples which will decrease the drying time (40–20 min), SEC (from 168.98 to 21.57 MJ/kg), color difference (from 50.59 to 15.38) and shrinkage (from 67.84% to 24.28%) while increasing the effective moisture diffusivity coefficient (from 1.007 × 10−9 to 8.11 × 10−9 m2/s), energy efficiency (from 0.89% to 15.23%) and dryer efficiency (from 2.11% to 21.2%). Compared to ultrasonic and blanching, microwave pretreatment increased the energy and drying efficiency; while the variations in the color and shrinkage were the lowest in the ultrasonic pretreatment. The optimal condition involved the temperature of 70 °C and sample thickness of 2 mm with the desirability above 0.89. The ANFIS model also managed to predict the response variables with R2 > 0.96.

scholarly journals Comparative study of different drying methods regard to the phenols and flavonoids content of dried Citrus aurantium L. leaves

2021 ◽  
Author(s):  
Geovanni Hernandez Galvez ◽  
Margarita Castillo Téllez ◽  
Jorge de Jesús Chan González ◽  
Francisca Méndez Morales ◽  
Damianys Almenares López ◽  
...  
Keyword(s):  
Natural Convection ◽  
Forced Convection ◽  
Design Methodology ◽  
Total Phenol ◽  
Drying Methods ◽  
Total Flavonoids ◽  
Citrus Aurantium ◽  
Solar Drying ◽  
Solar Dryer ◽  
Total Flavonoids Content

Objective: To determine the effects of different thermal drying technologies on the total phenol and flavonoid contents (TPC) and total flavonoids (TFC) in sour orange (Citrus aurantium L.) leaves. Design/methodology/approach: Solar drying was carried out in outdoor sunny conditions using two direct solar dryers; one with natural convection, the other with forced convection. The total phenol and flavonoid contents in gallic acid equivalents (GAE) and quercetin (Q), respectively, of ethanolic extracts of C. aurantium were assessed with spectrophotometric techniques. Results: The results demonstrated maximum phenol values for the direct natural convection solar dryer (161.4 mg EAG/g MS) and minimum values for shade drying (61.43 mg EAG/g MS). As for flavonoids, the highest values were obtained in the direct forced convection solar dryer (32.22 ± 1.6 mg EQ/g MS), while the lowest was registered in the open air sun (11.72 mg EQ/g MS). Conclusions: Direct solar dryers are technologies effective for maintaining the phenols and total flavonoids content in dried leaves of C. aurantium.  

scholarly journals Thin-layer mathematical modeling of apple slices drying, using open sun and cabinet solar drying methods

2021 ◽  
Vol 4 (2) ◽  
pp. 43-52
Author(s):  
Abdul Wasim Noori ◽  
Mohammad Jafar Royen ◽  
Juma Haydary
Keyword(s):  
Thin Layer ◽  
Mathematical Models ◽  
Water Activity ◽  
Model Fitting ◽  
Coefficient Of Determination ◽  
Drying Methods ◽  
Solar Drying ◽  
Drying Time ◽  
Climate Conditions ◽  
Thin Layer Drying

This paper aims to investigate the effect of climate conditions such as ambient temperature, humidity, pressure, sun radiation and pollution on sliced apples quality and drying time which are dried in an indirect forced cabinet solar drying (IFCSD) and open sun drying (OSD) systems. Both experiments were implemented at same place (Kabul, Afghanistan) and time. The IFCSD yield for saving time is 42.8 % which is more effective than drying in the OSD system. Simultaneously with the decreasing of sliced apple weight from 512.9 g down to 73.9 g, the water activity decreased from 0.955 down to 0.355 in the IFCSD system. For OSD system, the sample weight decreased from 512.6 g down to 78.4 g and its water activity from 0.955 down to 0.411. On the experiment day the average sun radiation was 571 w/m2 . The pressure drop between inlet and outlet of the dryer was 0.1 kPa. Different thin-layer mathematical models were investigated to identify the best model fitting the experimental data. The mathematical models’ performances were investigated by comparing the coefficient of determination (R 2 ), reduced chi-square (X2 ) and root mean square error (RMSE) coefficients. From all 11 applied thin-layer drying models the Page, Approximation diffusion, Verma et al and Midilli and Kacuk models are more fitted to our data.

A comparative study of mango solar drying methods by visible and near-infrared spectroscopy coupled with ANOVA-simultaneous component analysis (ASCA)

LWT ◽  
2019 ◽  
Vol 112 ◽  
pp. 108214 ◽  
Author(s):  
Weiwei Cheng ◽  
Klavs M. Sørensen ◽  
Richard J. Mongi ◽  
Bernadette K. Ndabikunze ◽  
Bernard E. Chove ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Comparative Study ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Component Analysis ◽  
Drying Methods ◽  
Solar Drying ◽  
Simultaneous Component Analysis

Mathematical Modelling of Thin Layer Sun and Solar Drying of Cassava Chips

2010 ◽  
Vol 6 (6) ◽  
Author(s):  
Toyosi Y Tunde-Akintunde
Keyword(s):  
Thin Layer ◽  
Correlation Coefficients ◽  
Moisture Diffusivity ◽  
Solar Drying ◽  
Drying Time ◽  
Drying Characteristics ◽  
Page Model ◽  
Thin Layer Drying ◽  
Rate Period ◽  
Pretreatment Conditions

In this paper, the effect of sun and solar drying and pretreatment conditions (soaking in water; soaking in water and then blanching; blanching and then soaking) on the drying characteristics and kinetics of cassava chips were investigated. The drying time was shorter for samples pretreated by soaking only (SK) compared to the others. It was observed that pretreatment conditions and drying method significantly (P < 0.05) affected the drying rate. The drying for all experiments occurred in the falling rate period with no constant rate period. Four mathematical models were studied for the description thin layer drying characteristics of pretreated cassava chips. The models considered were the Henderson and Pabis, Newton, Logarithmic and the Page model. Comparing the correlation coefficients (R2), chi-square (c2) and root mean square error (RMSE) values of four models, it was observed that the highest values of R2 and lowest ?2 and RMSE were obtained using Page model. This shows that the Page model represents drying characteristics better than other models. The effective moisture diffusivity values were estimated from Fick’s diffusional model. These values obtained for solar dried samples were generally higher than those obtained for sun dried samples.

Moisture Diffusivity and Energy Consumption during Microwave Drying of Plaster of Paris

2010 ◽  
Vol 5 (1) ◽  
Author(s):  
Magesh Ganesh Pillai ◽  
Iyyasamy Regupathi ◽  
Lima Rose Miranda ◽  
Thanapalan Murugesan
Keyword(s):  
Energy Consumption ◽  
Initial Moisture Content ◽  
Moisture Diffusivity ◽  
Operating Conditions ◽  
Microwave Drying ◽  
Effective Moisture Diffusivity ◽  
Experimental Conditions ◽  
Drying Time ◽  
Plaster Of Paris ◽  
Effective Moisture

The drying characteristics of plaster of paris (POP) under microwave conditions at different microwave power input, initial moisture content, sample thickness and drying time were studied. Further the experimental data on moisture ratio of POP for different operating conditions were obtained and calculations were made using nine basic drying model equations. The appropriate model with modified constants and coefficients to represent the drying kinetics of POP was found through the analysis of the statistical analysis. The effective moisture diffusivity of the drying process was also computed for different experimental conditions and a relationship between the drying rate constant and the effective moisture diffusivity was obtained. The energy consumption for microwave drying of plaster of paris at different experimental conditions were also computed.

Sign in / Sign up

Export Citation Format

Share Document