scholarly journals Comparison of Horizontal Axis Wind Turbines and Vertical Axis Wind Turbines

2014 ◽  
Vol 4 (8) ◽  
pp. 27-30 ◽  
Author(s):  
Magedi Moh. M. Saad
Keyword(s):  
Wind Turbines ◽  
Vertical Axis ◽  
Horizontal Axis ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines

STATE OF THE ART OF SMALL WIND ENERGY ANALYSING DIFFERENT CONTROLS

10.6036/10376 ◽  
2022 ◽  
Vol 97 (1) ◽  
pp. 11-11
Author(s):  
MARLON GALLO TORRES ◽  
ENEKO MOLA SANZ ◽  
IGNACIO MUGURUZA FERNANDEZ DE VALDERRAMA ◽  
AITZOL UGARTEMENDIA ITURRIZAR ◽  
GONZALO ABAD BIAIN ◽  
...  
Keyword(s):  
Wind Turbines ◽  
State Of The Art ◽  
Vertical Axis ◽  
Energy Conversion Efficiency ◽  
Horizontal Axis ◽  
Prevailing Wind ◽  
Vertical Axis Wind Turbines ◽  
Axis Of Rotation ◽  
Horizontal Axis Wind Turbines ◽  
Installation Cost

There are two wind turbine topologies according to the axis of rotation: horizontal axis, "Horizontal Axis Wind Turbines" (HAWT) and vertical axis, "Vertical Axis Wind Turbines" (VAWT) [2]. HAWT turbines are used for high power generation as they have a higher energy conversion efficiency [2]. However, VAWTs are used in mini wind applications because they do not need to be oriented to the prevailing wind and have lower installation cost.

Wind Power Output Performance Horizontal and Vertical Axis Wind Turbines for Isolated Small Applications in Saudi Arabia

2014 ◽  
Author(s):  
Luai M. Al-Hadhrami ◽  
Shafiqur Rehman
Keyword(s):  
Wind Turbines ◽  
Vertical Axis ◽  
Horizontal Axis ◽  
Energy Output ◽  
Energy Yield ◽  
Vertical Axis Wind Turbine ◽  
Average Wind Speed ◽  
Maximum Increase ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines

The study evaluated the energy output and plant capacity factor of small wind turbines in the category of 3–10 kW rated power. The effects of hub height on energy output and the PCF have been studied. To achieve the set objectives, hourly average wind speed data measured at 10, 20, 30, and 40 meter and wind direction at 30 and 40 meter above ground level during July 01, 2006 to July 10, 2008 has been utilized. The highest percentage change in annual energy yield (AEY) was obtained for an increase in hub height from 20 to 30 m for both horizontal and vertical wind turbines used in this study. Horizontal axis wind turbines HAWT-1, HAWT-2, and HAWT-6; and vertical axis wind turbines VAWT-1, VAWT-2, and VAWT-4 are recommended for various ranges of loads. Horizontal axis wind turbines were found generally more efficient than the vertical axis wind turbine in the present case. In general, all the turbines showed a maximum increase in energy yield for an increase of 10 m in hub height from 20 to 30m and the annual mean energy yield usually followed the load pattern in the study area. Lastly, the mean turbulence intensity was always less than the value recommended in IEC64100-1 standard.

Optimal Placement of Horizontal- and Vertical-Axis Wind Turbines in a Wind Farm for Maximum Power Generation Using a Genetic Algorithm

2011 ◽  
Author(s):  
Xiaomin Chen ◽  
Ramesh Agarwal
Keyword(s):  
Genetic Algorithm ◽  
Wind Turbines ◽  
Wind Farm ◽  
Optimization Problem ◽  
Vertical Axis ◽  
Optimal Placement ◽  
Vertical Axis Wind Turbines ◽  
Wake Effects ◽  
Horizontal Axis Wind Turbines ◽  
Wake Model

In this paper, we consider the Wind Farm layout optimization problem using a genetic algorithm. Both the Horizontal–Axis Wind Turbines (HAWT) and Vertical-Axis Wind Turbines (VAWT) are considered. The goal of the optimization problem is to optimally place the turbines within the wind farm such that the wake effects are minimized and the power production is maximized. The reasonably accurate modeling of the turbine wake is critical in determination of the optimal layout of the turbines and the power generated. For HAWT, two wake models are considered; both are found to give similar answers. For VAWT, a very simple wake model is employed.

Vertical axis wind turbine operation in icing conditions: A review study

2021 ◽  
pp. 0309524X2110618
Author(s):  
Syed Abdur Rahman Tahir ◽  
Muhammad Shakeel Virk
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Electricity Production ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Promising Solution ◽  
Review Study ◽  
Accretion Physics

Vertical Axis Wind Turbine (VAWT) can be a promising solution for electricity production in remote ice prone territories of high north, where good wind resources are available, but icing is a challenge that can affect its optimum operation. A lot of research has been made to study the icing effects on the conventional horizontal axis wind turbines, but the literature about vertical axis wind turbines operating in icing conditions is still scarce, despite the importance of this topic. This paper presents a review study about existing knowledge of VAWT operation in icing condition. Focus has been made in better understanding of ice accretion physics along VAWT blades and methods to detect and mitigate icing effects.

scholarly journals Design and Testing of a LUT Airfoil for Straight-Bladed Vertical Axis Wind Turbines

2018 ◽  
Vol 8 (11) ◽  
pp. 2266 ◽  
Author(s):  
Shoutu Li ◽  
Ye Li ◽  
Congxin Yang ◽  
Xuyao Zhang ◽  
Qing Wang ◽  
...  
Keyword(s):  
Wind Turbines ◽  
Lift Coefficient ◽  
Pressure Coefficient ◽  
Vertical Axis ◽  
Reynolds Numbers ◽  
Optimization Method ◽  
Geometrical Parameters ◽  
Vertical Axis Wind Turbines ◽  
University Of Technology ◽  
Horizontal Axis Wind Turbines

The airfoil plays an important role in improving the performance of wind turbines. However, there is less research dedicated to the airfoils for Vertical Axis Wind Turbines (VAWTs) compared to the research on Horizontal Axis Wind Turbines (HAWTs). With the objective of maximizing the aerodynamic performance of the airfoil by optimizing its geometrical parameters and by considering the law of motion of VAWTs, a new airfoil, designated the LUT airfoil (Lanzhou University of Technology), was designed for lift-driven VAWTs by employing the sequential quadratic programming optimization method. Afterwards, the pressure on the surface of the airfoil and the flow velocity were measured in steady conditions by employing wind tunnel experiments and particle image velocimetry technology. Then, the distribution of the pressure coefficient and aerodynamic loads were analyzed for the LUT airfoil under free transition. The results show that the LUT airfoil has a moderate thickness (20.77%) and moderate camber (1.11%). Moreover, compared to the airfoils commonly used for VAWTs, the LUT airfoil, with a wide drag bucket and gentle stall performance, achieves a higher maximum lift coefficient and lift–drag ratios at the Reynolds numbers 3 × 105 and 5 × 105.

Development and Application of a Simulation Tool for Vertical and Horizontal Axis Wind Turbines

2013 ◽  
Author(s):  
David Marten ◽  
Juliane Wendler ◽  
Georgios Pechlivanoglou ◽  
Christian Navid Nayeri ◽  
Christian Oliver Paschereit
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Horizontal Axis ◽  
Vertical Axis Wind Turbine ◽  
First Case ◽  
Horizontal Axis Wind Turbines ◽  
Lift And Drag ◽  
The Impact

A double-multiple-streamtube vertical axis wind turbine simulation and design module has been integrated within the open-source wind turbine simulator QBlade. QBlade also contains the XFOIL airfoil analysis functionalities, which makes the software a single tool that comprises all functionality needed for the design and simulation of vertical or horizontal axis wind turbines. The functionality includes two dimensional airfoil design and analysis, lift and drag polar extrapolation, rotor blade design and wind turbine performance simulation. The QBlade software also inherits a generator module, pitch and rotational speed controllers, geometry export functionality and the simulation of rotor characteristics maps. Besides that, QBlade serves as a tool to compare different blade designs and their performance and to thoroughly investigate the distribution of all relevant variables along the rotor in an included post processor. The benefits of this code will be illustrated with two different case studies. The first case deals with the effect of stall delaying vortex generators on a vertical axis wind turbine rotor. The second case outlines the impact of helical blades and blade number on the time varying loads of a vertical axis wind turbine.

scholarly journals Recent Development in the Design of Wind Deflectors for Vertical Axis Wind Turbine: A Review

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5140
Author(s):  
Altaf Hussain Rajpar ◽  
Imran Ali ◽  
Ahmad E. Eladwi ◽  
Mohamed Bashir Ali Bashir
Keyword(s):  
Wind Turbines ◽  
Vertical Axis ◽  
Optimization Techniques ◽  
Rotor Blades ◽  
Power Coefficient ◽  
Potential Contribution ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Network Costs

Developments in the design of wind turbines with augmentation are advancing around the globe with the goal of generating electricity close to the user in built-up areas. This is certain to help lessen the power generation load as well as distribution and transmission network costs by reducing the distance between the user and the power source. The main objectives driving the development and advancement of vertical-axis wind turbines are increasing the power coefficient and the torque coefficient by optimizing the upstream wind striking on the rotor blades. Unlike horizontal-axis wind turbines, vertical axis turbines generate not only positive torque but also negative torque during operation. The negative torque generated by the returning blade is a key issue for vertical-axis wind turbines (VAWTs) that is counterproductive. Installation of wind deflectors for flow augmentation helps to reduce the negative torque generated by the returning blades as well as enhance the positive torque by creating a diversion in the upstream wind towards the forwarding blade during operation. This paper reviews various designs, experiments, and CFD simulations of wind deflectors reported to date. Optimization techniques for VAWTs incorporating wind deflectors are discussed in detail. The main focus of the review was on the installation position and orientation of the deflectors and their potential contribution to increasing the power coefficient. Topics for future study are suggested in the conclusion section of the paper.

scholarly journals Modified Design of Savonius Wind Turbine Blade for Performance Improvement

2019 ◽  
Vol 9 (1) ◽  
pp. 1432-1437
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
New Technologies ◽  
Vertical Axis ◽  
Horizontal Axis ◽  
Wind Speeds ◽  
Wind Potential ◽  
Horizontal Axis Wind Turbines ◽  
Savonius Wind Turbine ◽  
Low Performance

In the context of worldwide energetic transition, wind energy shows up as one of the most prominent renewable energy to provide an alternative for the conventional energy source. Therefore, new technologies of a wind turbine are developed, horizontal axis wind turbines have been extensively investigated and evolved. However, the development of vertical axis wind turbines is still an open and area of research, The main objective is to develop a more efficient type of wind turbines able to operate at low wind speeds to take hold maximum wind potential, The Savonius rotor goes with such conditions, however, it faces critical drawbacks, in particular, the low performance in comparison with horizontal axis wind turbines, as well, the blade in return of savonius wind turbine generates a negative torque leading to a decrement of turbine performance. The present work aims to investigate a modified model of the conventional Savonius rotors with a focus on improving the coefficient of power, transient computational fluid dynamics (CFD) simulations are carried out in an effort to perform a validation of numerical results according to experimental data, also to conduct a comparative analysis of both savonius models

Experimental Investigation of Overlap and Blockage Effects on Three-Bucket Savonius Rotors

2007 ◽  
Vol 31 (5) ◽  
pp. 363-368 ◽  
Author(s):  
A. Biswas ◽  
R. Gupta ◽  
K.K. Sharma
Keyword(s):  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Experimental Investigations ◽  
Small Scale ◽  
Correction Factors ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Blockage Correction ◽  
Model Rotor

Savonius vertical axis wind turbines (VAWT) have advantages over horizontal axis wind turbines (HAWT), such as simple construction, acceptance of wind from any direction without orientation, self-starting, inexpensive etc. These advantages make it a viable proposition for small-scale applications in developing countries. In spite of the above advantages, VAWT are not gaining popularity mainly because of their poor efficiency. Hence, a three-bucket Savonius model rotor, having 8 cm bucket diameter and 20 cm height, was designed, fabricated, and tested in a sub-sonic wind tunnel. Provisions for variations of ‘blade’ overlap were included. Experiments were conducted for overlap conditions in the range of 16% to 35%. From the experimental investigations, power-coefficients (Cp) were calculated with and without blockage correction factors for tunnel interference. In both analyses, the power-coefficient increased if there was overlap, with an optimum value at 20% overlap of 47% without blockage correction, and 38% with blockage correction.

Sign in / Sign up

Export Citation Format

Share Document