COMPATIBILITY STUDY AND SUPPORTING CAPACITY OF TOURISM AT PERERENAN BEACH BADUNG, BALI

<p>The challenge of Pererenan Beach Development is to determine the efficiency of resource utilization, so that it does not exceed its carrying capacity. The carrying capacity of Pererenan Beach tourism is carried out by analyzing the suitability of coastal tourism. Then calculate the capacity to measure the number of tourists that can be accommodated without damaging the ecosystem. This study aims to determine the suitability and carrying capacity of coastal tourism. The method used is quantitative and descriptive analysis method. The results showed that the carrying capacity of the area on Pererenan Beach was classified under the carrying capacity and had a very suitable relative criterion (S1) with a percentage value of 96% suitable for use as beach recreation tourism. The Covid-19 pandemic provides a lesson that the concept of carrying capacity is important to avoid mass tourism and reduce the number of tourists according to their capacity so that visitors get comfort and travel satisfaction.</p>

Supporting Capacity of Tourism Areas in Ngandong Beach, Sidoharjo Village, Tepus District, Gunungkidul Regency, D.I.Yogyakarta

The Special Region of Yogyakarta is an area that is used as a recreational destination and is visited by many tourists. Many tourism activities are supported by the various facilities that have been provided by the community, government, entrepreneurs, and local governments. Tourists who came to Gunungkidul Regency with a combined number of foreign tourists and Nusantara tourists reached 3,661,612 tourists in 2019. High waves on July 25 2018 damaged tourist attractions and also settlements on Ngandong Beach. The purpose of this study is to determine the carrying capacity of the tourism area on Ngandong Beach. The area’s carrying capacity is known by calculating the number of visitors who come to Ngndong Beach and calculating using the formula for regional carrying capacity. Based on the calculation results, the carrying capacity of the area on Ngandong Beach can accommodate 1,225 people/day and has an area of 26,661 m2. The results obtained will be suggestions for the government and the surrounding community in processing the coastal areas on Ngandong Beach.

Taking risks the safe way: risk management and insurance practices of Ontario's Voluntary Sector

Taking Risks the Safe Way was developed as a knowledge‐building tool and research reference for nonprofit organizations across Ontario. The contents of this document will also guide the work of government in supporting capacity‐building among voluntary and community organizations, and provide a valuable resource for the insurance industry in serving the nonprofit sector. Keywords: CVSS, Centre for Voluntary Sector Studies, Working Paper Series,TRSM, Ted Rogers School of Management Citation

Taking risks the safe way: risk management and insurance practices of Ontario's Voluntary Sector

Taking Risks the Safe Way was developed as a knowledge‐building tool and research reference for nonprofit organizations across Ontario. The contents of this document will also guide the work of government in supporting capacity‐building among voluntary and community organizations, and provide a valuable resource for the insurance industry in serving the nonprofit sector. Keywords: CVSS, Centre for Voluntary Sector Studies, Working Paper Series,TRSM, Ted Rogers School of Management Citation

ANALISIS DAYA DUKUNG DAN DAYA TAMPUNG LAHAN PERMUKIMAN KOTA DENPASAR

Denpasar City is the capital city of Bali Province which has a rapid population growth rate every year. Along with the rapid population growth, this has an impact on meeting the needs of housing and other regional service facilities. The increasing number of population automatically causes an increase in the need for housing. Analysis of residential land supporting capacity and supply capability needed to preserve the environment. This research was conducted with a quantitative approach which describes and describes the results in the form of numbers or nominal values by explaining clearly either with the help of pictures, tables, or graphs. The quantitative data described are the population, land area and land capability area to support and accommodate housing as a place to live in Denpasar City. Based on the results of the analysis using the overlapping method and scoring using a GIS application. Denpasar City potential land to be developed as a residential area after being adjusted to the settlement plan in the Denpasar City Spatial Plan is available for 454,73 hectares of the total area of Denpasar City of 12,521 hectares or about 3.63% of land in Denpasar city. The capacity of Denpasar City houses is able to accommodate around 44.736 housing units and 178.943 residents. There are 2 sub-districts that are not able to accommodate the population in 2030, namely South Denpasar and North Denpasar. However, cumulatively, Denpasar City is still able to accommodate population growth in 2030 in obtaining residential land. Keywords: Supporting Capacity and Supply Capability; Residential Land; Denpasar City.

Influence of Controller’s Parameters on Static Bifurcation of Magnetic-Liquid Double Suspension Bearing

Magnetic-Liquid Double Suspension Bearing (MLDSB) is composed of an electromagnetic supporting and a hydrostatic supporting system. Due to greater supporting capacity and static stiffness, it is appropriate for occasions of middle speed, overloading, and frequent starting. Because of the complicated structure of the supporting system, the probability and degree of static bifurcation of MLDSB can be increased by the coupling of hydrostatic force and electromagnetism force, and then the supporting capacity and operation stability are reduced. As the key part of MLDSB, the controller makes an important impact on its supporting capacity, operation stability, and reliability. Firstly, the mathematical model of MLDSB is established in the paper. Secondly, the static bifurcation point of MLDSB is determined, and the influence of parameters of the controller on singular point characteristics is analyzed. Finally, the influence of parameters of the controller on phase trajectories and basin of attraction is analyzed. The result showed that the pitchfork bifurcation will occur as proportional feedback coefficient Kp increases, and the static bifurcation point is Kp = −60.55. When Kp < −60.55, the supporting system only has one stable node (0, 0). When Kp > −60.55, the supporting system has one unstable saddle (0, 0) and two stable non-null focuses or nodes. The shape of the basin of attraction changed greatly as Kp increases from −60.55 to 30, while the outline of the basin of attraction is basically fixed as Kp increases from 30 to 80. Differential feedback coefficient Kd has no effect on the static bifurcation of MLDSB. The rotor phase trajectory obtained from theoretical simulation and experimental tests are basically consistent, and the error is due to the leakage and damping effect of the hydrostatic system within the allowable range of the engineering. The research in the paper can provide theoretical reference for static bifurcation analysis of MLDSB.

3D Printing of Shiitake Mushroom Incorporated with Gums as Dysphagia Diet

With the speeding tendency of aging society, the population experienced dysphagia is increasing quickly. Desirable dysphagic diets should be safe, visually appealing and nutritious. 3D printing allows for creation of personalized nutritious foods with regular-like appearance. Shiitake mushroom, rich in protein and bioactive compounds, is suitable for elderly, but its hard texture was not friendly to the elderly with dysphagia. This study investigated the feasibility of production of dysphagic product using shiitake mushroom by 3D printing with various gums addition, including arabic gum (AG), xanthan gum (XG) and k-carrageenan gum (KG) at concentrations of 0.3%, 0.6% and 0.9% (w/w). Data suggested that XG and KG incorporation significantly increased inks’ mechanical strength by decreasing water mobility and promoting the formation of hydrogen bond, enabling 3D printed objects with great self-supporting capacity. The XG containing and KG-0.3% samples were categorized into level 5—minced and moist dysphagia diet within international dysphagia diet standardization initiative (IDDSI) framework. AG addition decreased mechanical strength and viscosity, hardness and self-supporting capacity of 3D printed constructions. AG-0.3% and AG-0.6% samples could not be classified as dysphagia diets based on IDDSI tests. This study provides useful information for dysphagia diet development with appealing appearance by 3D printing.