An improved performance routing protocol based on delay for MANETs in smart cities

Mobile ad-hoc networks (MANETs) is a set of mobile devices that can self-configuration, self-established parameters to transmission in-network. Although limited inability, MANETs have been applied in many domains to serve humanity in recent years, such as disaster recovery, forest fire, military, intelligent traffic, or IoT ecosystems. Because of the movement of network devices, the system performance is low. In order to MANETs could more contribution in the future of the Internet, the routing is a significant problem to enhance the performance of MANETs. In this work, we proposed a new delay-based protocol aim enhance the system performance, called performance routing protocol based on delay (PRPD). In order to analyze the efficiency of the proposed solution, we compared the proposed protocol with traditional protocols. Experiment results showed that the PRPD protocol improved packet delivery ratio, throughput, and delay compared to the traditional protocols.

Developing Hybrid Car to Car Communication System Based on MIMO Visible Light and Radio Frequency

This paper combines the advantages of both VLC communication and RF communication for car-to-car applications to achieve a higher data rate, more range coverage, smaller delay, and smaller BER. In the proposed scheme, the VLC maximum communication distance is chosen as 100 m per-hop approximately, which can be extended through multi-hop up to the timeout window of 5 hops. In contrast, the RF maximum communication distance is chosen as 200 m per-hop approximately, which is reasonable at the frequency band of 70 GHz to 90 GHz due to the high attenuation at this frequency band. A MATLAB simulation for a car-to-car framework is built to demonstrate and compare the BER, throughput, and delay outcomes at a hybrid VLC and RF communication. Our results show that VLC can achieve up to four times of the RF throughput while maintaining low BER of 10-6 and small delay of 10-4 with respect to RF communication only.

A User Prioritisation Algorithm for Horizontal Handover in Dense WLANs

This paper proposes an algorithm that enhances horizontal handover (HO) in dense wireless local area networks (WLANs), which is implemented in a software-defined wireless networking (SDWN)-based architecture. The algorithm considers the concept of user prioritisation, classifying the WLAN stations (STAs) into two categories representing high and low priorities respectively, and always attempts to guarantee the best quality of experience (QoE) to the high priority users. The architecture that implements the algorithm leverages the flexibility, programmability, and centralised nature of SDWN to efficiently manage the HO process. Moreover, the paper presents a performance evaluation campaign that demonstrates significant achievements against a state-of-the-art solution in terms of the provided QoE, throughput and delay. Finally, we discuss the importance of considering user prioritisation in a HO algorithm for dense WLANs.

Rancang Bangun WSN berbasis nRF24L01 dan SIM800l bertenaga Surya untuk Implementasi IoT secara Outdoor

Internet of things (IoT) requires an internet network for data communication between machines. Wifi is not always available outdoors and requires more portable data communication. This study aims to design a prototype Wireless Sensor Network (WSN) based on nRF24L01 and solar-powered SIM800l for outdoor IoT implementation. The study used a total of five IoT devices with four nodes with nRF24L01 and one node with nRF24L01 and SIM800l. Each device uses an Arduino nano, TP4056, 6WP solar panel, and a 900mAh 18650 battery. The evaluation of the system includes a comparative QoS analysis, namely packet delivery ratio (PDR), throughput, and delay in star and bus topology through data collection of observation methods by sensors. The evaluation results show that for unidirectional data communication the star topology has better results with PDR 99,099%, throughput 99.393%, and delay 0.0095s. While the bus topology produces a slight difference in PDR 98.766%, throughput 98.461%, and delay 0.017s. Evaluation of energy availability shows that during the day with an average voltage of 3.703v and at night 2.976v, there is no significant difference. During the day it produces 99.301% PDR, 99.653% throughput, and 0.001s delay, while at night it produces 94.221% PDR, 99.881% throughput, and 0.027s delay.

Security system with RFID control using E-KTP and internet of things

Crimes against property without using violence, in this case, are theft and burglary is the type of crime that is most common every year. However, home security needs a security system that is more efficient and practical. To overcome this, an internet of things (IoT) is needed. This research evaluated the performance prototype by reading distance from the radio frequency identification (RFID) reader using E-KTP and quality of service performance (i.e throughput and delay) from application android. This research design smart door lock using RFID sensor, passive infrared sensor (PIR), solenoid as door locks, buzzer, led, E-KTP as RFID tags and also android application to controlling and monitoring made with android studio is connected to NodeMCU V3 ESP8266 as storage data and connect with firebase realtime database instead of conventional keys. This research focuses on performance prototype and quality of service from features application is work well. Related to previous works, our evaluation shows that the performance prototype can read identity card (E-KTP) with a maximum distance is 4 cm, and performance quality of service for an application show that throughput and delay with a perfect index according to standardization telecommunications and internet protocol harmonization over network (TIPHON) depending on what features are being evaluated.

Sliding-Window QPS (SW-QPS)

In this work, we first propose a parallel batch switching algorithm called Small-Batch Queue-Proportional Sampling (SB-QPS). Compared to other batch switching algorithms, SB-QPS significantly reduces the batch size without sacrificing the throughput performance and hence has much lower delay when traffic load is light to moderate. It also achieves the lowest possible time complexity of O(1) per matching computation per port, via parallelization. We then propose another algorithm called Sliding-Window QPS (SW-QPS). SW-QPS retains and enhances all benefits of SB-QPS, and reduces the batching delay to zero via a novel switching framework called sliding-window switching. In addition, SW-QPS computes matchings of much higher qualities, as measured by the resulting throughput and delay performances, than QPS-1, the state-of-the-art regular switching algorithm that builds upon the same underlying bipartite matching algorithm.

A High-Performance Routing Protocol Based on Mobile Agent for Mobile Ad Hoc Networks

This paper presents a modification of a well-known routing protocol, namely Ad hoc On-Demand Distance Vector, as a solution to improve the performance of mobile ad hoc networks. We adapted the mobile agent technology as to novel metrics for routing in those networks. The metric is a function of the loss rate, the bandwidth and the end-to-end delay of the link. Indeed, we established a new tunable parameter to obtain a tradeoff between throughput and delay when computing the new metric. As a result, any routing protocol using this metric can al-ways choose a high-throughput and low-delay path between a source and a destination. Hence, the achievable performance of the mobile ad hoc networks has been improved remarkably with our modified routing protocol,