Breeding records of Leptotila rufaxilla (Aves: Columbidae) in southwestern Brazilian Amazon with notes on nesting in some regions of occurrence

We present new aspects of breeding biology of Gray-fronted Dove Leptotila rufaxilla, from five nests found between 2012 and 2014 in a lowland forest fragment in southwestern Brazil. The nests simple/platform shape were built at a mean height of 1.90 m above ground. The clutch size was two eggs white and elliptic, incubated for 15 days (based on three nests). We recorded predation in two nests still in incubation phase. Minimum hatch weight of nestlings was 10 g and young fledged with a mean mass of 56 g. The constant growth rate (K) of nestlings was 0.40 with a growth asymptote of 60.7 g. Daily survival rate, Mayfield and apparent nesting success in the incubation period was 90, 20 and 56%, respectively, while in the nestling period were all 100%. Our data and the contribution of citizen science showed that L. rufaxilla breeds over the year, mainly in the rainy season, both in southwestern Amazonia and in other regions of occurrence.

Breeding biology and biometrics of Myiozetetes c. cayanensis (Aves: Tyrannidae) in southwest Brazilian Amazonia with breeding season in Brazil

Our study provides information on the breeding and biometrics of Rusty-Margined Flycatcher Myiozetetes cayanensis in southwest Brazilian Amazonia. Myiozetetes cayanensis is distributed from Central America until north of South America. We made observations on reproduction and captures of this species in a terra firme forest fragment in the state of Acre, between 1999 and 2020 and we evaluated the breeding season in Brazil through citizen science data. We monitored nine nests between 2012 and 2020, built at a mean height of 1.8 m above ground. Clutch size was two, three or four eggs, incubated for 15 days. We monitored the development of six nestlings: minimum hatch weight was 2 g and young fledged with a mean mass of ca. 25.5 g. The constant growth rate (K) of nestlings was 0.18 with a growth asymptote of 22.8 g. Daily survival rate was 90% and 100% during the incubation and nestling periods, respectively. The Mayfield success in the incubation and nestling periods was 20 and 100%, respectively. Apparent nesting success in the incubation and nestling periods was 46 and 100%, respectively. We recorded a minimum longevity of 2 years, nine months and 26 days. The subspecies M. c. cayanensis start to nest mainly between the dry and rainy season in Brazil, overlapping with the molt period in southwest Amazonia.

First nest records, nestling growth and morphometrics of Dendroplex picus peruvianus (Aves: Dendrocolaptidae) in southwestern Brazilian Amazon

We reported the first data on the breeding and growth in Dendroplex picus peruvianus from a forest fragment in southwestern Amazonia. We observed and netted this species between 1999 and 2019. We found two active nests in 2012 and 2013, but we monitored only one. Clutch size was two eggs, incubated for 16 days. The constant growth rate (K) of nestlings was 0.31 with a growth asymptote of 46.3 g. We recorded a longest minimum longevity of eight years. Our records showed that D. p. peruvianus breeds mainly in the rainy season (September–March) overlapping with the molt period.

Outbreaks in care homes may lead to substantial disease burden if not mitigated

The number of COVID-19 outbreaks reported in UK care homes rose rapidly in early March of 2020. Owing to the increased co-morbidities and therefore worse COVID-19 outcomes for care home residents, it is important that we understand this increase and its future implications. We demonstrate the use of an SIS model where each nursing home is an infective unit capable of either being susceptible to an outbreak (S) or in an active outbreak (I). We use a generalized additive model to approximate the trend in growth rate of outbreaks in care homes and find the fit to be improved in a model where the growth rate is proportional to the number of current care home outbreaks compared with a model with a constant growth rate. Using parameters found from the outbreak-dependent growth rate, we predict a 73% prevalence of outbreaks in UK care homes without intervention as a reasonable worst-case planning assumption. This article is part of the theme issue ‘Modelling that shaped the early COVID-19 pandemic response in the UK’.

Physiological Responses of the Copepods Acartia tonsa and Eurytemora carolleeae to Changes in the Nitrogen:Phosphorus Quality of Their Food

Two contrasting estuarine copepods, Acartia tonsa and Eurytemora carolleeae, the former a broadcast spawner and the latter a brood spawner, were fed a constant carbon-based diatom diet, but which had a variable N:P content, and the elemental composition (C, N, P) of tissue and eggs, as well as changes in the rates of grazing, excretion, egg production and viability were measured. To achieve the varied diet, the diatom Thalassiosira pseudonana was grown in continuous culture at a constant growth rate with varying P supply. Both copepods altered their chemical composition in response to the varied prey, but to different degrees. Grazing (clearance) rates increased for A. tonsa but not for E. carolleeae as prey N:P increased. Variable NH4+ excretion rates were observed between copepod species, while excretion of PO43− declined as prey N:P increased. Egg production by E. carolleeae was highest when eating high N:P prey, while that of A. tonsa showed the opposite pattern. Egg viability by A. tonsa was always greater than that of E. carolleeae. These results suggest that anthropogenically changing nutrient loads may affect the nutritional quality of food for copepods, in turn affecting their elemental stoichiometry and their reproductive success, having implications for food webs.

Stoichiometry of Fe, Mn and Co in the marine diazotroph Crocosphaera subtropica ATCC51142 in Fe- and P-limited continuous cultures

We investigated trace element stoichiometries of the nitrogen-fixing marine cyanobacterium Crocosphaera subtropica ATCC51142 under steady-state growth conditions. We utilized exponentially fed batch cultures and varied iron (Fe) concentrations to establish nutrient limitation in C. subtropica growing at a constant growth rate (0.11 d-1). No statistical difference in cell density, chlorophyll a, particulate organic carbon (C), nitrogen (N) and phosphorus (P) were observed between consecutive days after Day 14, and cultures were assumed to be at steady state with respect to growth for the remaining 11 d of the experiment. Cultures were limited by P in the highest Fe treatment (41 nmol l-1) and by Fe in the 2 lower-concentration Fe treatments (1 and 5 nmol l-1). Cell size and in vivo fluorescence changed throughout the experiment in the 1 nmol l-1 Fe treatment, suggesting ongoing acclimation of C. subtropica to our lowest Fe supply. Nevertheless, Fe:C ratios were not significantly different between the Fe treatments, and we calculated an average (±SD) Fe:C ratio of 32 ± 14 µmol mol-1 for growth at 0.11 d-1. Steady-state P-limited cells had lower P quotas, whilst Fe-limited cells had higher manganese (Mn) and cobalt (Co) quotas. We attribute the increase in Mn and Co quotas at low Fe to a competitive effect resulting from changes in the supply ratio of trace elements. Such an effect has implications for variability in elemental stoichiometry in marine phytoplankton, and potential consequences for trace metal uptake and cycling in marine systems.

Improving Influenza HA-Vlps Production in Insect High Five Cells via Adaptive Laboratory Evolution

The use of non-standard culture conditions has proven efficient to increase cell performance and recombinant protein production in different cell hosts. However, the establishment of high-producing cell populations through adaptive laboratory evolution (ALE) has been poorly explored, in particular for insect cells. In this study, insect High Five cells were successfully adapted to grow at a neutral culture pH (7.0) through ALE for an improved production of influenza hemagglutinin (HA)-displaying virus-like particles (VLPs). A stepwise approach was used for the adaptation process, in which the culture pH gradually increased from standard 6.2 to 7.0 (ΔPh = 0.2–0.3), and cells were maintained at each pH value for 2–3 weeks until a constant growth rate and a cell viability over 95% were observed. These adapted cells enabled an increase in cell-specific HA productivity up to three-fold and volumetric HA titer of up to four-fold as compared to non-adapted cells. Of note, the adaptation process is the element driving increased specific HA productivity as a pH shift alone was inefficient at improving productivities. The production of HA-VLPs in adapted cells was successfully demonstrated at the bioreactor scale. The produced HA-VLPs show the typical size and morphology of influenza VLPs, thus confirming the null impact of the adaptation process and neutral culture pH on the quality of HA-VLPs produced. This work strengthens the potential of ALE as a bioprocess engineering strategy to improve the production of influenza HA-VLPs in insect High Five cells.

Analytical analysis of the influence of aluminum-containing nanotechnogenic raw materials on the performance of acid-resistant materials

The results of analytical analysis of the effect of nanotechnogenic waste ― spent catalyst on acid resistance, strength and heat resistance of acid-resistant tiles showed three main areas of structural adjustment of the material: increasing the growth rate of indicators, a constant growth rate and a site with a sharply negative growth dynamics. Structural changes that improve the studied indicators are associated with the formation of a new mineral ‒ mullite; the negative growth dynamics of indicators is associated with an increase in the amount of cristobalite, which contributes to an increase in the volume of the product by 15,4 %.

The impact of innate accruals quality on the future market value moderated by dividend policy

PurposeThe purpose of this study is to test and prove how the quality of innate accruals can make a significant contribution to the prospect of future market value for manufacturing industries.Design/methodology/approachThis research used multiple regression method by gathering all observation data on a go public company in the industrial manufacturing sector.FindingsThe results of this test can show that the dividend policy helps reduce the use of accruals to increase investor perceptions about the prospects of the company's future period, especially the value of earnings informativeness, including valid information about the actual fundamental conditions. These results reflect high innate accruals quality, so the use of low accruals, especially in reporting earnings.Research limitations/implicationsThis test uses a measurement of a constant growth rate with the calculation of the indicator g in the next five-year period, and the proof has secondary data abnormalities reflecting a very high level of variation in the use of accruals. As an implication of the data that is not normal, it causes a large amount of data pruning through outlier tests. Samples that qualify for processing are 180 from 384 data.Originality/valueBy calculating the value of the dividend payout with the growth rate, the estimated future market price can be done with reasonable accuracy.

The first- and second-order isothermal phase transitions in Fe3Ga-type compounds

Structural features and kinetics of the transition between ordered metastable b.c.c.-derived D03 and equilibrium f.c.c.-derived L12 phases of Fe–xGa alloys (x = 27.2% and 28.0%) have been analyzed by in situ real-time neutron diffraction during isothermal annealing in the temperature range 405–470°C. It has been revealed that the transition proceeds with alternation of the first- and second-order phase transformations according to a D03 → A2 → A1 → L12 scheme, where A2 and A1 are disordered b.c.c. and f.c.c. structures. Deformations of the crystal lattice that arise due to these transitions are determined. The kinetics of the L12 phase nucleation and growth were analyzed in the frame of the Johnson–Mehl–Avrami–Kolmogorov (JMAK) model; however, only the early stage of the D03 → L12 transition is well described by the JMAK equation. The value of the Avrami exponent corresponds to the constant growth rate of the new L12 phase and decreasing nucleation rate in the Fe–27.2Ga alloy and indicates the presence of pre-existing nucleation centres of the L12 phase in the Fe–28.0Ga alloy.