A Novel Method For The Fibre-Based Conductive Ring Spun Yarn Production

To take the advantages of spun yarns such as porosity, softness, bending as well as usability as yarn/fabric forms, in this study, it was worked on an alternative conductive yarn production method. Different from other methods such as coating, core-spun, blending, a conductive nanosuspension was applied to viscose, cotton and polyester open fibre bundles with different feeding amounts during the ring spinning with a specially developed apparatus. Reduced graphene oxide (rGO) was used to impart conductivity. Different from literature, rGO was synthesized with a single step process instead of two-step processes to ensure simple, easy-to-apply process and industrial applicability. Following to yarn production, winding, knitting and washing processes were realized to evaluate the changes in yarn conductivity and the usability of the yarns in the post-spinning processes. In addition to tensile properties of the yarns and air permeability of the fabrics, electrical resistance and environmental impact of the method was compared with immersion&drying process. The results indicated that alternative method allows the production of conductive (lower resistance than 100 kΩ) but also stronger, flexible, washable and breathable electronic textile products with an environmentally friendly process. There has been no effort, as yet, to get conductivity in this manner. Therefore, the developed method can be considered to be a new application in the functional yarn production field. The produced conductive yarns can be converted into fabric form by weaving, knitting and embroidery. Therefore, they can also be seen as an ideal as the platforms for future wearable electronics.

Preliminary Analysis of a Wireless and Wearable Electronic-Textile EASI-Based Electrocardiogram

Background: With cardiovascular disease continuing to be the leading cause of death and the primary reason for hospitalization worldwide, there is an increased burden on healthcare facilities. Electronic-textile (e-textile)-based cardiac monitoring offers a viable option to allow cardiac rehabilitation programs to be conducted outside of the hospital.Objectives: This study aimed to determine whether signals produced by an e-textile ECG monitor with textile electrodes in an EASI configuration are of sufficient quality to be used for cardiac monitoring. Specific objectives were to investigate the effect of the textile electrode characteristics, placement, and condition on signal quality, and finally to compare results to a reference ECG obtained from a current clinical standard the Holter monitor.Methods: ECGs during different body movements (yawning, deep-breathing, coughing, sideways, and up movement) and activities of daily living (sitting, sitting/standing from a chair, and climbing stairs) were collected from a baseline standard of normal healthy adult male using a novel e-textile ECG and a reference Holter monitor. Each movement or activity was recorded for 5 min with 2-min intervals between each recording. Three different textile area electrodes (40, 60, and 70 mm2) and electrode thicknesses (3, 5, and 10 mm) were considered in the experiment. The effect of electrode placement within the EASI configuration was also studied. Different signal quality parameters, including signal to noise ratio, approximate entropy, baseline power signal quality index, and QRS duration and QT intervals, were used to evaluate the accuracy and reliability of the textile-based ECG monitor.Results: The overall signal quality from the 70 mm2 textile electrodes was higher compared to the smaller area electrodes. Results showed that the ECGs from 3 and 5 mm textile electrodes showed good quality. Regarding location, placing the “A” and “I” electrodes on the left and right anterior axillary points, respectively, showed higher signal quality compared to the standard EASI electrode placement. Wet textile electrodes showed better signal quality compared to their dry counterparts. When compared to the traditional Holter monitor, there was no significant difference in signal quality, which indicated textile monitoring was as good as current clinical standards (non-inferior).Conclusion: The e-textile EASI ECG monitor could be a viable option for real-time monitoring of cardiac activities. A clinical trial in a larger sample is recommended to validate the results in a clinical population.

Emergence of flexible technology in developing advanced systems for post-stroke rehabilitation: a comprehensive review

Objective. Stroke is one of the most common neural disorders, which causes physical disabilities and motor impairments among its survivors. Several technologies have been developed for providing stroke rehabilitation and to assist the survivors in performing their daily life activities. Currently, the use of flexible technology (FT) for stroke rehabilitation systems is on a rise that allows the development of more compact and lightweight wearable systems, which stroke survivors can easily use for long-term activities. Approach. For stroke applications, FT mainly includes the “flexible/stretchable electronics”, “e-textile (electronic textile)” and “soft robotics”. Thus, a thorough literature review has been performed to report the practical implementation of FT for post-stroke application. Main results. In this review, the highlights of the advancement of FT in stroke rehabilitation systems are dealt with. Such systems mainly involve the “biosignal acquisition unit”, “rehabilitation devices” and “assistive systems”. In terms of biosignals acquisition, electroencephalography (EEG) and electromyography (EMG) are comprehensively described. For rehabilitation/assistive systems, the application of functional electrical stimulation (FES) and robotics units (exoskeleton, orthosis, etc.) have been explained. Significance. This is the first review article that compiles the different studies regarding flexible technology based post-stroke systems. Furthermore, the technological advantages, limitations, and possible future implications are also discussed to help improve and advance the flexible systems for the betterment of the stroke community.

Progress in Flexible Electronic Textile for Heating Application: A Critical Review

Intelligent textiles are predicted to see a ‘surprising’ development in the future. The consequence of this revived interest has been the growth of industrial goods and the improvement of innovative methods for the incorporation of electrical features into textiles materials. Conductive textiles comprise conductive fibres, yarns, fabrics, and finished goods produced using them. Present perspectives to manufacture electrically conductive threads containing conductive substrates, metal wires, metallic yarns, and intrinsically conductive polymers. This analysis concentrates on the latest developments of electro-conductivity in the area of smart textiles and heeds especially to materials and their assembling processes. The aim of this work is to illustrate a potential trade-off between versatility, ergonomics, low energy utilization, integration, and heating properties.

INTEGRATED DESIGN OF PHYSIOLOGICAL MULTI-PARAMETER SENSORS ON A SMART GARMENT BY ULTRA-ELASTIC E-TEXTILE

The performance of electronic textile (E-textile)-based wearable sensors is largely determined by the wire and electrode contacting stability to the body, which is a multi-discipline challenge for smart garment designs. In this paper, an integrated design of wearable sensors on a smart garment is presented to concurrently measure the multi-channel electrocardiogram, respiration, and temperature signals in different regions of the body. Sensors in separative probe-controller schemes are introduced with full-textile designs of the electrodes and signal transmission wires. An ultra-elastic structure of E-textile wire is proposed with excellent electrical stability, high stretch ratio, and low tension under body dynamics. A complete garment integration solution of the probes, wires, and the sensors is presented. The design is evaluated by comparing the signal quality in static and moderate body movements, which shows clinical level comparable precision and stability. The proposed design may constitute a general solution of distributed noninvasive physiological multi-parameter detection and monitoring applications.