Impact of Bio-Ethanol, Bio-ETBE Addition on the Volatility of Gasoline with Oxygen Content at the Level of E10

This study examines the impact of the addition of bio-ethanol/bio-ETBE on the main volatility properties of gasoline. Although several studies have been published on the addition of ethanol or ETBE to gasoline, the simultaneous addition of these oxygenates has not been studied by taking the maximum oxygen content of 3.7% m/m into account. The EN 228:2012-A1:2017 standard specifies the requirements for marketed unleaded gasoline. This standard is able to determine, among other things, a gasoline type with a maximum oxygen content of 3.7% m/m and sets the maximum limits for ethanol content at 10% v/v and 22% v/v for ethers with a minimum five carbon atoms, such as ΕΤΒΕ. Five refinery fractions were mixed in various proportions and were used as base fuels. A total of 30 samples were prepared by blending the base fuels with bio-ethanol/bio-ETBE. In each of these base fuels, bio-ethanol was added in concentrations up to 10% v/v. Subsequently, bio-ETBE was added to each of these fuels in concentrations up to 20.8% v/v for use as a stabilizer. All of the samples were examined using the EN ISO 13016-1 and EN ISO 3405 test methods while considering the volatility requirements set by EN 228. The results showed that the addition of bio-ETBE has a beneficial effect on the volatility characteristics of the samples, as it reduces the vapor pressure of the final blend and sets all fuels in compliance with the required specification limits set by the EN 228 standard.

Recent Advances on the Halo- and Cyano-Trifluoromethylation of Alkenes and Alkynes

Incorporation of fluorine into organic molecules is a well-established strategy in the design of advanced materials, agrochemicals, and pharmaceuticals. Among numerous modern synthetic approaches, functionalization of unsaturated bonds with simultaneous addition of trifluoromethyl group along with other substituents is currently one of the most attractive methods undergoing wide-ranging development. In this review article, we discuss the most significant contributions made in this area during the last decade (2012−2021). The reactions reviewed in this work include chloro-, bromo-, iodo-, fluoro- and cyano-trifluoromethylation of alkenes and alkynes.

Adipogenic Stimulation and Pyrrolidine Dithiocarbamate Induced Osteogenic Inhibition of Dental Pulp Stem Cells Is Countered by Cordycepin

Background: dental pulp-derived stem cells are easy to access and collect and are an excellent source of stem cells for regenerative therapy. These cells can interact with many biomolecules and scaffolds and can pass on the instructive signals to the sites of regeneration where they are used. In this regard cordycepin, a potential biomolecule derived from medicinal mushrooms with a spectrum of bioactive properties such as antioxidant, anti-inflammatory, and anticancer has not yet been tested for its effect on human dental pulp stem cells. Objective: the objective of the present study was to assess the in vitro adipogenic and osteogenic differentiation potential of human dental pulp stem cells with or without induction after administration of cordycepin. Materials and methods: human dental pulp stem cells DPSCs were isolated from a healthy permanent tooth extracted for orthodontic purposes after obtaining informed consent. Flow cytometry technique was used to assess the surface markers of these cells such as CD73, CD90, and CD105, CD34, CD45, and HLA-DR. Further, an MTT assay was performed on the cells after subjecting them to various concentrations of cordycepin. Following this, the adipogenic and osteogenic potential of the dental pulp stem cells was assessed with or without induction under the influence/absence of 5 µM of cordycepin. The results obtained were statistically analyzed and documented. Results: it was found that the dental pulp stem cells showed strong positive expression for CD73, CD90, and CD105 and faint expression of CD34, CD45, and HLA-DR. MTT assay revealed that 5 µM was the optimum concentration of cordycepin for all the assays. Concerning adipogenesis experiments, there was a statistically significant lowering of all the 4 adipogenesis-related genes PPARγ, FABP4, LPL, and C/EBPα following cordycepin treatment in the presence of induction compared to the only induction group and untreated control cells (p < 0.05). In connection with osteogenesis, was found that there was a statistically significant increase in the expression of RUNX2, COL1A1, OSX and OCN genes along with the increase in alkaline phosphatase and alizarin red staining in the DPSC treated with cordycepin along with the presence of induction and simultaneous addition of PDTC compared to the control untreated cells and cells treated with induction and simultaneous addition of PDTC (p < 0.05). Conclusion: cordycepin can be exploited for its osteopromotive properties and can be used as a bioactive molecule alongside the administration of dental pulp stem cells in the area of regenerative biology and medicine.

Wollastonite to Improve Fire Properties in Medium-Density Fiberboard Made from Wood and Chicken Feather Fibers

Poultry is a crucial global protein source.However, processing creates sizable quantities of feathers as a by-product. Identifying suitable uses for these feathers poses a major challenge. One possible use would be as an extender in medium density fiberboards (MDF). At the same time, feathers might also modify the inherent fire resistance of the resulting panels, suggesting the need for additives to enhance fire performance. The potential for using feathers to supplement wood in MDF panels was evaluated in conjunction with the addition of wollastonite. The effects of using 5% or 10% feathers with or without 10% wollastonite were investigated. Adding 5% feathers did affect properties. However, simultaneous addition of 10% wollastonite resulted in panels with improved fire performance properties and increased the ability of panels to dissipate heat. The results suggest that feathers could be a resource for extending timber supplies for MDF production, especially with wollastonite to improve fire performance.

Oral and Palatal Dentition of Axolotl Arises From a Common Tooth-Competent Zone Along the Ecto-Endodermal Boundary

Vertebrate dentitions arise at various places within the oropharyngeal cavity including the jaws, the palate, or the pharynx. These dentitions develop in a highly organized way, where new tooth germs are progressively added adjacent to the initiator center, the first tooth. At the same time, the places where dentitions develop house the contact zones between the outer ectoderm and the inner endoderm, and this colocalization has instigated various suggestions on the roles of germ layers for tooth initiation and development. Here, we study development of the axolotl dentition, which is a complex of five pairs of tooth fields arranged into the typically tetrapod outer and inner dental arcades. By tracking the expression patterns of odontogenic genes, we reason that teeth of both dental arcades originate from common tooth-competent zones, one present on the mouth roof and one on the mouth floor. Progressive compartmentalization of these zones and a simultaneous addition of new tooth germs distinct for each prospective tooth field subsequently control the final shape and composition of the axolotl dentition. Interestingly, by following the fate of the GFP-labeled oral ectoderm, we further show that, in three out of five tooth field pairs, the first tooth develops right at the ecto-endodermal boundary. Our results thus indicate that a single tooth-competent zone gives rise to both dental arcades of a complex tetrapod dentition. Further, we propose that the ecto-endodermal boundary running through this zone should be accounted for as a potential source of instruction factors instigating the onset of the odontogenic program.

Strategies for the synthesis of block copolymers with biodegradable polyester segments

Oxygenated block copolymers with biodegradable polyester segments can be prepared in one-pot through sequential or simultaneous addition of monomers. This review highlights the state of the art in this area.