Adsorption of the Orange Methyl Dye and Lead (II) by the Cationic Resin Amberliteand#174;IRC-50: Kinetic Study and Modeling of Experimental Data

During this present study, we tested the adsorption performance of heavy metal ions; bivalent lead (Pb (II)) and the anionic dye (methyl orange (MO)) from model aqueous solutions with the ion exchange resin of the Amberliteand#174;IRC-50 type. This performance was evaluated using inductively coupled plasma (ICP) and atomic absorption spectroscopy (AAS). The pH of the solution was adjusted to 6.5 for the bath temperature, the initial mass concentration of Pb (II) and MO was adopted at 20 mg/L, the mass of the resin-type adsorbent Amberliteand#174;IRC-50 was taken at 0.1g and the adsorption capacity Qe was studied. The results obtained during this study show that the kinetic study of the adsorption was obtained at the contact time t = 30 min for the metal Pb (II) and at t = 60 min for the dye MO. These results also showed that the equilibrium of adsorption was reached at time t = 60 min with an adsorption performance of around 99% for Pb (II) and around 96% for MO. Note that the parameters of different mathematical models indicate that the adsorption process is spontaneous in the second degree.

Recovery of non-regenerable exhausted resin by hydrothermal chlorination

Purpose Cationic resin is widely used in decolouring of textile wastewaters. Tonnes of resin are used in sector, and disposal of resin is being a second waste problem. The purpose of this paper is to investigate the adsorption behaviour of the methylene blue cationic dye from aqueous solution on the cation exchanger Lewatit CNP80 to understand the regenerability of cation exchanger resin from textile wastewaters. Design/methodology/approach Cationic resin was used as an alternative low-cost adsorbent for removing methylene blue dye from textile wastewaters. The adsorption study was carried out in the batch mode. Batch adsorption studies were carried out to examine the effect of parameters such as methylene blue concentration, temperature, pH, resin dose, shaking speed and contact time. Findings It was observed that dye-removal capacity of resin was reached from 17 mgg−1 to 19.4 mgg−1 at 25 °C temperature, pH 5 in 15 min. At the appropriate range of parameters, it was observed that more than 98% removal efficiency was achieved for methylene blue dye, and also, this study was focussed on whether the resin regenerates. In regeneration studies, our purpose was to recover of non-regenerable exhausted cationic resin by NaOCl. Regeneration of Lewatit CNP80 was performed in five cycles. After regeneration, the authors tried to determine whether the adsorption capacity was affected by regeneration. Originality/value In this study, the authors focussed on regeneration studies. The aim is to find easy, low-cost regeneration agent. In conclusion, the authors found that NaOCl is eligible for regeneration studies. The exhausted resin was recovered by NaOCl, and the authors also tested 5th regeneration cycles. Sodium hypochlorite is not a common regeneration agent for adsorption studies. Generally, resin is regenerated by HCl or other regeneration agent products. As a result of that, operational cost was reduced, and the other thing that the authors want to emphasise is textile industry wastewater based high temperature; therefore, this regeneration study can easily work with textile industries.

New insights in the use of a strong cationic resin in dye adsorption

The adsorption of methyl orange (MO) in aqueous solution was evaluated using a cationic polymer (Amberlite IRA 402) in batch experiments under different experimental variables such as amount of resin, concentration of MO, optimum interaction time and pH. The maximum adsorption capacity of the resin was 161.3 mg g−1 at pH 7.64 at 55 °C and using a contact time of 300 min, following the kinetics of the pseudo-first-order model in the adsorption process. The infinite solution volume model shows that the adsorption rate is controlled by the film diffusion process. In contrast, the chemical reaction is the decisive step of the adsorption rate when the unreacted core model is applied. A better fit to the Langmuir model was shown for equilibrium adsorption studies. From the thermodynamic study it was observed that the sorption capacity is facilitated when the temperature increases.

Sulfate Radicals-Based Technology as a Promising Strategy for Wastewater

This study was focused on the generation of sulfate radicals and their applicability as powerful oxidants for degrading complex organic compounds with the final objective of operating in flow systems. To this end, the removal of two compounds from the pharmaceutical industry was assessed, lissamine green and prednisolone. Initially, sulfate radicals were generated by the activation of persulfate with iron as homogenous catalyst, and the key parameters involved in the process, as catalyst concentration and oxidant dosage, were evaluated. Furthermore, with the aim of preventing the secondary contamination due to metal leaching and to be operate in a continuous mode, a heterogeneous catalyst was developed. For it, the iron was fixed on a cationic resin as Amberlite IR120 Na+ form. It was demonstrated that the removal of both pollutants increases with greater catalyst dosages, achieving a decay of 85% within 25 min with 30 g·L−1 of catalyst. Moreover, the reuse capability of the catalyst was tested, illustrating that it is rough enough for its reuse. Conversely, in order to develop a continuous treatment in flow system, a fixed bed reactor was constructed and its feasibility was proven. Different experiments with residence times from 10 min to 60 min were performed, obtaining a removal level of ≈95% and 90% for prednisolone and lissamine green, respectively, at residence time of 60 min. In conclusion, the potential of sulfate radicals-based technology for degrading organic contaminants has been demonstrated.

Effects of Arginine on Multimodal Chromatography: Experiments and Simulations

Multimodal or mixed-mode chromatography can be used to separate various proteins, including antibodies. The separation quality and efficiency have been improved by the addition of solutes, especially arginine. This review summarizes the mechanism underlying the effects of arginine on protein elution in multimodal chromatography with neutral, anionic or cationic resin ligands; the mechanism has been investigated using experiments and molecular dynamics simulations. Arginine is effective in facilitating protein elution compared to salts and protein denaturants such as guanidine and urea. The unique elution effect of arginine can be explained by the interplay among arginine, proteins and the resin ligands. Arginine exhibits multiple binding modes for the ligands and further affinity for protein aromatic residues through its guanidinium group. These properties make arginine versatile for protein elution in multimodal chromatography. Taking into account that arginine is an aggregation suppressor for proteins but not a protein denaturant, arginine is a promising protein-eluting reagent for multimodal chromatography.

Effect of Cation Influx on the Viability of Freeze-Dried Lactobacillus brevis WiKim0069

Extension of the storage stability of freeze-dried lactic acid bacteria is important for industrialization. In this study, the effect of cation influx from soy powder, which contains high amounts of cations, as a cryoprotective agent on the viability of freeze-dried Lactobacillus brevis WiKim0069 was tested. Compared to that in the absence of the soy powder, bacterial viability was significantly higher in the presence of soy powder. Approximately 4.7% of L. brevis WiKim0069 survived in the absence of the protective agent, whereas 92.8% viability was observed in the presence of soy powder. However, when cations were removed from the soy powder by using ethylenediaminetetraacetic acid (EDTA) and a cationic resin filter, the viability of L. brevis WiKim0069 decreased to 22.9–24.7%. When the soy powder was treated with ethylene glycol tetraacetic acid, the viability was higher than when it was pretreated with EDTA and a cationic resin filter, suggesting that Mg2+ had a role in enhancing the viability of L. brevis WiKim0069. Cold adaptation at 10 °C prior to freeze-drying had a positive effect on the storage stability of freeze-dried L. brevis WiKim0069, with 60.6% viability after 56 days of storage. A decrease in the fluorescence polarization value indicated an increase in membrane fluidity, which regulates the activity of ion channels present in the cell membrane. Cold adaptation caused activation of the cation channels, resulting in increased intracellular influx of cations, i.e., Ca2+ and Mg2+. These results suggest that cold adaptation can be used to improve the storage stability of L. brevis WiKim0069.

Rapid, versatile and sensitive method for the quantification of radium in environmental samples through cationic extraction and inductively coupled plasma mass spectrometry

Rapid and selective method for radium quantification with interference removal by cationic resin and ICP-MS/MS, leading to a detection limit of 10 fg L−1 for 226Ra and 228Ra.