Polymer nanofibers for biomedical applications: advances by electrospinning

Background: The demand for novel biomaterials has been exponentially rising in the last years as well as the searching for new technologies able to produce more efficient products in both drug delivery systems and regenerative medicine. Objective: The technique that can pretty well encompass the needs for novel and high-end materials with a relatively low-cost and easy operation is the electrospinning of polymer solutions. Methods: Electrospinning usually produces ultrathin fibers that can be applied in a myriad of biomedical devices including sustained delivery systems for drugs, proteins, biomolecules, hormones, etc that can be applied in a broad spectrum of applications, from transdermal patches to cancer-related drugs. Results: Electrospun fibers can be produced to mimic certain tissues of the human body, being an option to create new scaffolds for implants with several advantages. Conclusions: In this review, we aimed to encompass the use of electrospun fibers in the field of biomedical devices, more specifically in the use of electrospun nanofibers applications toward the production of drug delivery systems and scaffolds for tissue regeneration.

The Investigation of the Structure and Properties of Ozone-Sterilized Nonwoven Biopolymer Materials for Medical Applications

Nowadays, the development and research of nonwoven medical fibrous materials based on biopolymers is an area of a great practical interest. One of the most promising methods for producing nonwoven materials with a highly developed surface is electrospinning (ES). In this article, the possibility of efficient sterilization of ultrathin fibers based on polyhydroxybutyrate (PHB) by ozone treatment was considered. The purpose of this work was to select the most optimal morphology of nonwoven materials for medical purposes and to establish the correlation between the supramolecular structure and the physical properties of fibrous materials while under the influence of an ozone sterilization process.

Aggressive Impacts Affecting the Biodegradable Ultrathin Fibers Based on Poly(3-Hydroxybutyrate), Polylactide and Their Blends: Water Sorption, Hydrolysis and Ozonolysis

Ultrathin electrospun fibers of pristine biopolyesters, poly(3-hydroxybutyrate) (PHB) and polylactic acid (PLA), as well as their blends, have been obtained and then explored after exposure to hydrolytic (phosphate buffer) and oxidative (ozone) media. All the fibers were obtained from a co-solvent, chloroform, by solution-mode electrospinning. The structure, morphology, and segmental dynamic behavior of the fibers have been determined by optical microscopy, SEM, ESR, and others. The isotherms of water absorption have been obtained and the deviation from linearity (the Henry low) was analyzed by the simplified model. For PHB-PLA fibers, the loss weight increments as the reaction on hydrolysis are symbate to water absorption capacity. It was shown that the ozonolysis of blend fibrils has a two-stage character which is typical for O3 consumption, namely, the pendant group’s oxidation and the autodegradation of polymer molecules with chain rupturing. The first stage of ozonolysis has a quasi-zero-order reaction. A subsequent second reaction stage comprising the back-bone destruction has a reaction order that differs from the zero order. The fibrous blend PLA/PHB ratio affects the rate of hydrolysis and ozonolysis so that the fibers with prevalent content of PLA display poor resistance to degradation in aqueous and gaseous media.

ECM-Mimetic Nylon Nanofiber Scaffolds for Neurite Growth Guidance

Numerous nanostructured synthetic scaffolds mimicking the architecture of the natural extracellular matrix (ECM) have been described, but the polymeric nanofibers comprising the scaffold were substantially thicker than the natural collagen nanofibers of neural ECM. Here, we report neuron growth on electrospun scaffolds of nylon-4,6 fibers with an average diameter of 60 nm, which closely matches the diameter of collagen nanofibers of neural ECM, and compare their properties with the scaffolds of thicker 300 nm nanofibers. Previously unmodified nylon was not regarded as an independent nanostructured matrix for guided growth of neural cells; however, it is particularly useful for ultrathin nanofiber production. We demonstrate that, while both types of fibers stimulate directed growth of neuronal processes, ultrathin fibers are more efficient in promoting and accelerating neurite elongation. Both types of scaffolds also improved synaptogenesis and the formation of connections between hippocampal neurons; however, the mechanisms of interaction of neurites with the scaffolds were substantially different. While ultrathin fibers formed numerous weak immature β1-integrin-positive focal contacts localized over the entire cell surface, scaffolds of submicron fibers formed β1-integrin focal adhesions only on the cell soma. This indicates that the scaffold nanotopology can influence focal adhesion assembly involving various integrin subunits. The fabricated nanostructured scaffolds demonstrated high stability and resistance to biodegradation, as well as absence of toxic compound release after 1 month of incubation with live cells in vitro. Our results demonstrate the high potential of this novel type of nanofibers for clinical application as substrates facilitating regeneration of nervous tissue.

Electrospun Poly(butylene-adipate-co-terephthalate)/Nano-hyDroxyapatite/Graphene Nanoribbon Scaffolds Improved the In Vivo Osteogenesis of the Neoformed Bone

Electrospun ultrathin fibrous scaffold filed with synthetic nanohydroxyapatite (nHAp) and graphene nanoribbons (GNR) has bioactive and osteoconductive properties and is a plausible strategy to improve bone regeneration. Poly(butylene-adipate-co-terephthalate) (PBAT) has been studied as fibrous scaffolds due to its low crystallinity, faster biodegradability, and good mechanical properties; however, its potential for in vivo applications remains underexplored. We proposed the application of electrospun PBAT with high contents of incorporated nHAp and nHAp/GNR nanoparticles as bone grafts. Ultrathin PBAT, PBAT/nHAp, and PBAT/nHAp/GNR fibers were produced using an electrospinning apparatus. The produced fibers were characterized morphologically and structurally using scanning electron (SEM) and high-resolution transmission electron (TEM) microscopies, respectively. Mechanical properties were analyzed using a texturometer. All scaffolds were implanted into critical tibia defects in rats and analyzed after two weeks using radiography, microcomputed tomography, histological, histomorphometric, and biomechanical analyses. The results showed through SEM and high-resolution TEM characterized the average diameters of the fibers (ranged from 0.208 µm ± 0.035 to 0.388 µm ± 0.087) and nHAp (crystallite around 0.28, 0.34, and 0.69 nm) and nHAp/GNR (200–300 nm) nanoparticles distribution into PBAT matrices. Ultrathin fibers were obtained, and the incorporated nHAp and nHAp/GNR nanoparticles were well distributed into PBAT matrices. The addition of nHAp and nHAp/GNR nanoparticles improved the elastic modulus of the ultrathin fibers compared to neat PBAT. High loads of nHAp/GNR (PBATnH5G group) improved the in vivo lamellar bone formation promoting greater radiographic density, trabecular number and stiffness in the defect area 2 weeks after implantation than control and PBAT groups.

Structure and Properties of Fibrous Materials Based on Poly(-3-Hydroxybutyrate)

The article studies the supramolecular structure of polymer matrices for sustained isolation of drugs based on ultrathin fibers of polyhydroxybutyrate obtained by electrospinning method. Dipyridamole was chosen as a model drug. The concentration of dipyridamole in the fibers ranged from 1 to 5%. The morphology of nonwoven fibrous materials was investigated by scanning electron microscopy, differential scanning calorimetry, electron paramagnetic resonance. It was shown that the addition of the dipyridamole leads to a change in the fiber geometry. Fibers based on polyhydroxybutyrate are characterized by non-equilibrium molecular structure. In the current work, it was found that the addition of dipyridamole causes extra crystallization processes and the molecular mobility in the amorphous regions of the polymer slows down

SCIENTIFIC BASIS OF SILVER NANOPARTICLES COATINGS FORMATION ON SURFACE OF POLYPROPYLENE ULTRATHIN FIBERS

New principles of silver nanoparticles coatings formation on the ultrathin fibers surface using electromagnetic radiation of the deci- and nanometer ranges for bactericidal modification of liquid media were proposed. Coating production involves the formation of silver nanoparticles as a result of photoreduction from an aqueous solution of AgNO3 with a concentration of 0.001M at the presence of ultrathin polypropylene fibers with their subsequent stabilization on the surface of the fibers with microwave radiation of the fiber material are initiated, which prevents agglomeration and stabilize silver nanoparticles on their surface. Ultrathin polypropylene fibers obtained as a result of pneumatic spraying of the melt are represented by an average diameter dav = 1.5-6 μm and a fairly wide lognormal distribution. The possibility of a two-step formation of coatings on the polymer fibers surface has been demonstrated using the method of numerical simulation of the self-assembly and self-organization of silver nanoparticles, taking into account the dissipation of their energy into the polymeric matrix through the exciton and phonon channels. It has been established that as a result of local microwave heating of silver nanoparticles, processes of the formation of supramolecular structures of the fiber material are initiated, which prevents agglomeration and stabilizes silver nanoparticles on their surface. The coatings obtained were characterized by transmission electron microscopy and spectroscopy. For example, silver nanoparticles formed and attached to the surface of fibers as a result of a ten-minute exposure to ultraviolet radiation have a size of 50 ± 18 nm. Studies of bactericidal activity showed that ultrathin polypropylene fibrous materials with coatings based on silver nanoparticles can effectively perform antibacterial treatment of natural waters with a high level of microbiological contamination. After 10 cycles of water purification, the amount of silver in the samples, according to atomic emission spectroscopy, remains unchanged.