scholarly journals Aggressive Impacts Affecting the Biodegradable Ultrathin Fibers Based on Poly(3-Hydroxybutyrate), Polylactide and Their Blends: Water Sorption, Hydrolysis and Ozonolysis

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 941
Author(s):  
Anatoly A. Olkhov ◽  
Polina M. Tyubaeva ◽  
Alexandre A. Vetcher ◽  
Svetlana G. Karpova ◽  
Alexander S. Kurnosov ◽  
...  
Keyword(s):  
Water Absorption ◽  
Bone Destruction ◽  
Absorption Capacity ◽  
Zero Order ◽  
Structure Morphology ◽  
Ultrathin Fibers ◽  
Gaseous Media ◽  
Zero Order Reaction ◽  
Segmental Dynamic ◽  
Rate Of Hydrolysis

Ultrathin electrospun fibers of pristine biopolyesters, poly(3-hydroxybutyrate) (PHB) and polylactic acid (PLA), as well as their blends, have been obtained and then explored after exposure to hydrolytic (phosphate buffer) and oxidative (ozone) media. All the fibers were obtained from a co-solvent, chloroform, by solution-mode electrospinning. The structure, morphology, and segmental dynamic behavior of the fibers have been determined by optical microscopy, SEM, ESR, and others. The isotherms of water absorption have been obtained and the deviation from linearity (the Henry low) was analyzed by the simplified model. For PHB-PLA fibers, the loss weight increments as the reaction on hydrolysis are symbate to water absorption capacity. It was shown that the ozonolysis of blend fibrils has a two-stage character which is typical for O3 consumption, namely, the pendant group’s oxidation and the autodegradation of polymer molecules with chain rupturing. The first stage of ozonolysis has a quasi-zero-order reaction. A subsequent second reaction stage comprising the back-bone destruction has a reaction order that differs from the zero order. The fibrous blend PLA/PHB ratio affects the rate of hydrolysis and ozonolysis so that the fibers with prevalent content of PLA display poor resistance to degradation in aqueous and gaseous media.

The effect of sugar beet fiber addition on the chemical properties of tortilla chips

2012 ◽  
pp. 385-388 ◽  
Author(s):  
Azadeh Saadatmandi ◽  
Mohammad Elahi ◽  
Reza Farhoosh ◽  
Mahdi Karimi
Keyword(s):  
Sugar Beet ◽  
Water Absorption ◽  
Protein Content ◽  
Chemical Properties ◽  
Absorption Capacity ◽  
Ash Content ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Overall Acceptability ◽  
Tortilla Chips

The incorporation of sugar beet fiber (0–5%) to tortilla chips and the effects on the chemical and sensory properties were studied. Addition of sugar beet fiber (SBF) led to an increasing of water absorption capacity, ash content and darkness while lowering the protein content and oil absorption. Sensory evaluation showed that the overall acceptability of tortilla chips reduces if adding more than 2% SBF.

Proximal and Functional Properties of Edible Ripened Split Beans of Coastal Wild Legume Canavalia maritima

2019 ◽  
Vol 15 (3) ◽  
pp. 228-233
Author(s):  
Prabhavathi Supriya ◽  
Kandikere R. Sridhar
Keyword(s):  
Water Absorption ◽  
Functional Properties ◽  
Crude Protein ◽  
Functional Foods ◽  
Protein Solubility ◽  
Calorific Value ◽  
Absorption Capacity ◽  
Total Lipids ◽  
Crude Fibre ◽  
Protein Rich

Background: Utilization of wild legumes has received prime importance in the recent past to compensate the scarcity of protein-rich foods as well as to tackle the protein energy malnutrition. Ripened split beans of Canavalia maritima devoid of seed coat and testa serve as traditional nutraceutical source for the coastal dwellers of Southwest India. Objective: The present study projects proximal and functional attributes of uncooked and cooked ripened split beans of C. maritima to be used in the preparation of functional foods. Methods: Proximal properties (moisture, crude protein, total lipids, crude fibre, carbohydrates and calorific value) and functional properties (protein solubility, gelation capacity, water-absorption, oilabsorption, emulsion qualities and foam qualities) of split beans were evaluated by standard methods. Results: Cooking did not significantly changed the crude protein, total lipids, ash, carbohydrates and calorific value, while it significantly increased the crude fibre. The protein solubility, water-absorption capacity, foam capacity and foam stability were significantly higher in uncooked than cooked beans. The cooked beans were superior to uncooked beans in least gelation concentration, low oil-absorption capacity, emulsion activity and emulsion stability. Conclusion: The functional properties of split bean flours were influenced by the proximal components like crude protein, total lipids and crude fibre. The energy-rich ripened split beans of C. maritima can serve as a new potential source for production of value added functional foods owing to their rich protein, rich carbohydrates, low-lipid and potential bioactive attributes.

Intensification of cooling in a batch reactor with an exothermic reaction by nonisothermal control in stable pseudostationary states

1984 ◽  
Vol 49 (11) ◽  
pp. 2566-2578 ◽  
Author(s):  
Josef Horák ◽  
Petr Beránek ◽  
Dagmar Maršálková
Keyword(s):  
Batch Reactor ◽  
Exothermic Reaction ◽  
Reaction Model ◽  
Order Reaction ◽  
Zero Order ◽  
Coolant Temperature ◽  
Inlet Temperature ◽  
Adaptive Parameter ◽  
Zero Order Reaction ◽  
Set Up

An algorithm is set up and tested for the temperature control of a batch reactor consisting in jump changes in the inlet temperature of entering coolant. This temperature is so chosen that its difference from the temperature of the reaction mixture is near the highest difference at which the stable pseudostationary state of the system still exists. For the prediction of the new coolant inlet temperature, a zero-order reaction model is used with an adaptive parameter estimated from the experimentally established value of the maximum of the reaction mixture overheating at the previous coolant temperature.

scholarly journals Characteristics of Biodegradable Gelatin Methacrylate Hydrogel Designed to Improve Osteoinduction and Effect of Additional Binding of Tannic Acid on Hydrogel

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2535
Author(s):  
Ji-Bong Choi ◽  
Yu-Kyoung Kim ◽  
Seon-Mi Byeon ◽  
Jung-Eun Park ◽  
Tae-Sung Bae ◽  
...  
Keyword(s):  
Mechanical Strength ◽  
Water Absorption ◽  
Tannic Acid ◽  
Absorption Capacity ◽  
Animal Testing ◽  
High Concentration ◽  
Cell Compatibility ◽  
Property Evaluation ◽  
Bone Minerals ◽  
Cell Adhesion And Proliferation

In this study, a hydrogel using single and double crosslinking was prepared using GelMA, a natural polymer, and the effect was evaluated when the double crosslinked hydrogel and tannic acid were treated. The resulting hydrogel was subjected to physicochemical property evaluation, biocompatibility evaluation, and animal testing. The free radicals generated through APS/TEMED have a scaffold form with a porous structure in the hydrogel, and have a more stable structure through photo crosslinking. The double crosslinked hydrogel had improved mechanical strength and better results in cell compatibility tests than the single crosslinked group. Moreover, in the hydrogel transplanted into the femur of a rat, the double crosslinked group showed an osteoinductive response due to the attachment of bone minerals after 4 and 8 weeks, but the single crosslinked group did not show an osteoinductive response due to rapid degradation. Treatment with a high concentration of tannic acid showed significantly improved mechanical strength through H-bonding. However, cell adhesion and proliferation were limited compared to the untreated group due to the limitation of water absorption capacity, and no osteoinduction reaction was observed. As a result, it was confirmed that the treatment of high-concentration tannic acid significantly improved mechanical strength, but it was not a suitable method for improving bone induction due to the limitation of water absorption.

scholarly journals Water Absorption Capacity Determines the Functionality of Vital Gluten Related to Specific Bread Volume

Foods ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 228
Author(s):  
Marina Schopf ◽  
Katharina Anne Scherf
Keyword(s):  
Water Absorption ◽  
Water Content ◽  
Wheat Flour ◽  
Specific Volume ◽  
Disulfide Bonds ◽  
Protein Composition ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Water Addition ◽  
Wheat Flours

Vital gluten is often used in baking to supplement weak wheat flours and improve their baking quality. Even with the same recipe, variable final bread volumes are common, because the functionality differs between vital gluten samples also from the same manufacturer. To understand why, the protein composition of ten vital gluten samples was investigated as well as their performance in a microbaking test depending on the water content in the dough. The gluten content and composition as well the content of free thiols and disulfide bonds of the samples were similar and not related to the specific bread volumes obtained using two dough systems, one based on a baking mixture and one based on a weak wheat flour. Variations of water addition showed that an optimal specific volume of 1.74–2.38 mL/g (baking mixture) and 4.25–5.49 mL/g (weak wheat flour) was reached for each vital gluten sample depending on its specific water absorption capacity.

scholarly journals A Characterization Study of Morphology and Properties of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH)/Aloe Vera Fibers Biocomposites: Effect of Fiber Surface Treatments

Proceedings ◽  
2020 ◽  
Vol 69 (1) ◽  
pp. 38
Author(s):  
Celia Idres ◽  
Mustapha Kaci ◽  
Nadjet Dehouche ◽  
Idris Zembouai ◽  
Stéphane Bruzaud
Keyword(s):  
Thermal Stability ◽  
Surface Morphology ◽  
Water Absorption ◽  
Loss Modulus ◽  
Aloe Vera ◽  
Fiber Surface ◽  
Complex Viscosity ◽  
Absorption Capacity ◽  
Characterization Study ◽  
Efficient Route

This paper aims to investigate the effect of different chemical modifications of biocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) and aloe vera bio-fibers incorporated at 20 wt%. The fiber surface was modified with alkaline, organosilanes, and combined alkaline/organosilanes. Surface morphology, thermal stability, water absorption capacity, and rheological behavior of the modified biocomposite materials were studied, and the results compared to both unmodified biocomposites and neat PHBH. The study showed that the modified biocomposites with both alkaline and organosilanes exhibited an improved surface morphology, resulting in a good fiber/matrix interfacial adhesion. As a result, increases in complex viscosity, storage modulus, and loss modulus were observed, whereas water absorption was reduced. Thermal stability remained almost unchanged, with the exception of the biocomposite treated with alkaline, where this property decreased significantly. Finally, the coupling of alkaline and organosilane modification is an efficient route to enhance the properties of PHBH biocomposites.

scholarly journals Cellulose Nanofibrils/Xyloglucan Bio-Based Aerogels with Shape Recovery

Gels ◽  
2021 ◽  
Vol 7 (1) ◽  
pp. 5
Author(s):  
Samuel Mandin ◽  
Samuel Moreau ◽  
Malika Talantikite ◽  
Bruno Novalès ◽  
Jean-Eudes Maigret ◽  
...  
Keyword(s):  
Water Absorption ◽  
Shape Recovery ◽  
Cellulose Nanofibrils ◽  
High Water ◽  
Absorption Capacity ◽  
Absorption Properties ◽  
High Affinity ◽  
High Water Absorption ◽  
Freezing Procedure ◽  
The Impact

Bio-based aerogels containing cellulose nanofibrils (CNFs) are promising materials due to the inherent physical properties of CNF. The high affinity of cellulose to plant hemicelluloses (xyloglucan, xylan, pectin) is also an opportunity to develop biomaterials with new properties. Here, we prepared aerogels from gelled dispersions of CNFs and xyloglucan (XG) at different ratios by using a freeze-casting procedure in unidirectional (UD) and non-directional (ND) manners. As showed by rheology analysis, CNF and CNF/XG dispersions behave as true gels. We investigated the impact of the freezing procedure and the gel’s composition on the microstructure and the water absorption properties. The introduction of XG greatly affects the microstructure of the aerogel from lamellar to cellular morphology. Bio-based aerogels showed high water absorption capacity with shape recovery after compression. The relation between morphology and aerogel compositions is discussed.

Loading Effect of Hollow Glass Microsphere (HGM) and Foam Microstructure on the Specific Mechanical Properties and Water Absorption of Syntactic Foam Composite

2021 ◽  
Vol 56 ◽  
pp. 34-50
Author(s):  
Olusegun Adigun Afolabi ◽  
Krishnan Kanny ◽  
Turup Mohan
Keyword(s):  
Water Absorption ◽  
Volume Fraction ◽  
Syntactic Foam ◽  
Density Variation ◽  
Absorption Capacity ◽  
Neat Epoxy ◽  
Hollow Glass Microsphere ◽  
Hollow Glass ◽  
Marine Application ◽  
Foam Composite

AbstractEpoxy syntactic foams (SF) filled with hollow glass microspheres (HGM) were prepared by simple resin casting method and characterization in this study. The effect of varying the amount of HGM on the specific mechanical and water absorption properties of SF composites were investigated. Five different composition of SF (SFT60-0.5 to SFT60-2.5) were compared with the neat epoxy matrix. The wall thickness of the microballoons differ because of its different percentile size distribution (10th, 50th and 90th), which reflects in its density variation. The results show that the specific tensile and flexural strength increases with an increasing filler (HGM) content. The density of SF filled with HGM reduces with increasing volume fraction of filler content. Scanning electron microscopy was done on the failed samples to examine the fractured surfaces. The water absorption capacity of the SF was also investigated as it relates to the HGM volume fraction variation. All the syntactic foam composition shows a better diffusion coefficient capacity than the neat epoxy resin. This makes it applicable in structural purposes and several marine application products such as Autonomous Ultimately Vehicle (AUV).

Comparison of Bio and Eco-technologies with Chemical Methods for Pre-treatment of Flax Fibers: Impact on Fiber Properties

2014 ◽  
Vol 9 (4) ◽  
pp. 155892501400900 ◽  
Author(s):  
Sabela Camano ◽  
Nemeshwaree Behary ◽  
Philippe Vroman ◽  
Christine Campagne
Keyword(s):  
Water Absorption ◽  
Fiber Bundle ◽  
Glass Fibers ◽  
Fiber Surface ◽  
Pectate Lyase ◽  
High Water ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Flax Fibers ◽  
The Impact

Flax fibers, available as fiber bundles, are commonly used as fiber reinforcement in composite materials as a substitute for glass fibers. Pre-treatments are often necessary for improving fiber-resin adhesion, and also to facilitate fiber elementarization, and to improve fiber ability to be implemented in mechanical processes limiting fiber damages. This paper focuses on the impact of biotechnologies (effect of 2 different enzymes: a pectate lyase and a laccase) and of an ecotechnology (ultrasound with ethanol), compared to classical chemical pre-treatments (using aqueous NaOH and ammonia) on the final flax fiber bundle properties, before and after a carding process. Fiber surface properties (wettability and/or zeta potential values), fiber elementarization and mechanical properties vary with the type of treatment (chemical nature of product and conditions used). Fibers elementarised using pectate lyase and ultrasound/ethanol have a hydrophilic surface and a high water absorption capacity, and are also of highest quality in terms of increased fineness. Treatment with NaOH yields the poorest fiber bundle tenacity. Laccase enzyme yields long thick hydrophobic fibers having very low water absorption capacity, and the most neutral surface charge. Properties of flax fibers can be easily monitored using different pre-treatments resulting in fibers which would be suited for various final applications.

Sign in / Sign up

Export Citation Format

Share Document