Unified and non-ideal switch model for analysis of switching circuits

Purpose This paper aims to propose a new unified and non-ideal switch model for analysis of switching circuits. Design/methodology/approach The model has a single unified structure that includes all possible states (on, off) of the switches. The analysis with the proposed switch model requires only one topology and uses the single system equation regardless of states of switches. Moreover, to improve accuracy, the model contains the on-state resistance and capacitive effect of switches. The system equations and the states of switches are updated by control variables, used in the model. Findings There are no restrictions on circuit topology and switch connections. Switches can be internally and externally controlled. The non-ideal nature of the model allows the switch to be modeled more realistically and eliminates the drawbacks of the ideal switch concept. After modeling with the proposed switch model, a linear circuit is obtained. Two examples related to switching circuits are included into the study. The results confirm the accuracy of the model. Originality/value This paper contributes a different switch model for analysis of switching converters to the literature. The main advantage of the model is that it has a unified and non-ideal property. With the proposed switch model, the transient events, like voltage spikes and high-frequency noises, caused by inductor and capacitor elements at switching instants can be observed properly.

Low-Voltage GaN FETs in Motor Control Application; Issues and Advantages: A Review

The efficiency and power density improvement of power switching converters play a crucial role in energy conversion. In the field of motor control, this requires an increase in the converter switching frequency together with a reduction in the switching legs’ dead time. This target turns out to be complex when using pure silicon switch technologies. Gallium Nitride (GaN) devices have appeared in the switching device arena in recent years and feature much more favorable static and dynamic characteristics compared to pure silicon devices. In the field of motion control, there is a growing use of GaN devices, especially in low voltage applications. This paper provides guidelines for designers on the optimal use of GaN FETs in motor control applications, identifying the advantages and discussing the main issues. In this work, primarily an experimental evaluation of GaN FETs in a low voltage electrical drive is carried out. The experimental investigation is obtained through two different experimental boards to highlight the switching legs’ behavior in several operative conditions and different implementations. In this evaluative approach, the main GaN FETs’ technological aspects and issues are recalled and consequently linked to motion control requirements. The device’s fast switching transients combined with reduced direct resistance contribute to decreased power losses. Thus, in GaN FETs, a high switching frequency with a strong decrease in dead time is achievable. The reduced dead time impact on power loss management and improvement of output waveforms quality is analyzed and discussed in this paper. Furthermore, input filter capacitor design matters correlated with increasing switching frequency are pointed out. Finally, the voltage transients slope effect (dv/dt) is considered and correlated with low voltage motor drives requirements.

Noncascading Quadratic Buck-Boost Converter for Photovoltaic Applications

The development of switching converters to perform with the power processing of photovoltaic (PV) applications has been a topic receiving growing interest in recent years. This work presents a nonisolated buck-boost converter with a quadratic voltage conversion gain based on the I–IIA noncascading structure. The converter has a reduced component count and it is formed by a pair of L–C networks and two active switches, which are operated synchronously to achieve a wide conversion ratio and a quadratic dependence with the duty ratio. Additionally, the analysis using different sources and loads demonstrates the differences in the behavior of the converter, as well as the pertinence of including PV devices (current sources) into the analysis of new switching converter topologies for PV applications. In this work, the voltage conversion ratio, steady-state operating conditions and semiconductor stresses of the proposed converter are discussed in the context of PV applications. The operation of the converter in a PV scenario is verified by experimental results.

High-performance photonic transformers for DC voltage conversion

Direct current (DC) converters play an essential role in electronic circuits. Conventional high-efficiency DC voltage converters, especially step-up type, rely on switching operation, where energy is periodically stored within and released from inductors and/or capacitors connected in a variety of circuit topologies. Since these energy storage components, especially inductors, are fundamentally difficult to scale down, miniaturization of switching converters proves challenging. Furthermore, the resulting switching currents produce significant electromagnetic noise. To overcome the limitations of switching converters, photonic transformers, where voltage conversion is achieved through light emission and detection processes, have been demonstrated. However, the demonstrated efficiency is significantly below that of the switching converter. Here we perform a detailed balance analysis and show that with a monolithically integrated design that enables efficient photon transport, the photonic transformer can operate with a near-unity conversion efficiency and high voltage conversion ratio. We validate the theory with a transformer constructed with off-the-shelf discrete components. Our experiment showcases near noiseless operation and a voltage conversion ratio that is significantly higher than obtained in previous photonic transformers. Our findings point to the possibility of a high-performance optical solution to miniaturizing DC power converters and improving the electromagnetic compatibility and quality of electrical power.

Non-Linear Inductors Characterization in Real Operating Conditions for Power Density Optimization in SMPS

The exploitation of power inductors outside their linear region in switching converters can be achieved by raising the current until a decrease in the inductance can be noticed. This allows using a smaller magnetic core, increasing the power density of the converter. On the other hand, a detailed description of the magnetization curve including the temperature is required. Since this information is often not included in the inductor’s datasheets, this paper shows how to identify the behavior of an inductor when it is operated up to saturation and its temperature rises. In order to characterize the inductor in real operating conditions, a dedicated measurement rig was developed. It consists of a switching converter that encompasses the inductor under test and is controlled by a virtual instrument developed in LabVIEW. The characterization system was tested by retrieving the inductance and the magnetization curves vs. current for two commercial inductors at core temperatures up to 105 °C. The magnetic core was then characterized by the saturation current vs. inductance, obtaining an expression for the whole family of inductors sharing the same core. Finally, we experimentally analyzed the thermal transient of the inductors in operating conditions, confirming the fundamental role of the temperature in changing the current profiles and the core saturation condition.