Fermionic Condensate on Finite Radius Cones

The fermionic condensate is investigated for a field localized on a finite radius 2- dimensional cone in the presence of a magnetic flux threading the cone apex. On the edge of the cone a boundary condition is imposed that differs from the MIT bag boundary condition, most frequently used for the confinement of fermions. The fermionic condensate is decomposed into the boundary-free and edge-induced contributions. Both these parts are periodic functions of the magnetic flux with the period equal to the flux quantum.

Assessment of the 2019 Chamoson debris flow event (Swiss Alps)

<p>Debris flows triggered by heavy rain are common and can cause huge damages in Alpine valleys. In this case we documented the changes occurred in the Losentsé valley after the 11 August 2019 event, which caused two death and several damages to the village of Chamoson. The Chamoson basin is located in the Alps on the right side of the Rhône valley. Three main rivers drain the Chamoson basin, the Losentsé, the Cry and the Tsené. The main debris flow event occurred in the Losentsé sub-basin. The Losentsé River is 9 km long from the sources at 3000 m until the alluvial cone apex at 600 m. In the upper part of the Chamoson basin thick loose debris cones and glacial deposits lie on steep slopes, the geology of the middle basin is formed by unstable clayey shales with several active landslides on both lateral valley slopes.</p><p>The village of Chamoson is located on the huge alluvial cone built with torrential events from the three main rivers. Since the XIX century, several big debris flow events (1898, 1923, 2003, 2018) were recorded in this area and mitigation measures were built in the principal rivers. Unfortunately, the 2019 debris flows overflowed the channels limit when the flows reached the alluvial cone apex, reaching the road and took a car with 2 persons inside. Upstream in the middle basin 2 wood bridges were destroyed and many concrete or stone walls (mitigation measures) along the river were damaged.</p><p>After the event we acquired pictures with a drone from the sources area and the Losentsé river valley in order to have a post event image. With this image we could analyse and map the source areas and the inundated areas in the Losentsé channel. We did also field observation along the river.</p><p>After comparing the pre- and post-event images we mapped the middle and upper basin inundated areas by the 2019 event and the described the deposits and eroded sections along the river. We calculated the peak discharge of 1000 m<sup>3</sup>/s for this event using the inundated transversal profile area near the cone apex and the flow velocity obtained from a movie. The peak discharge corresponds to 4 in the size classification for debris flows (Jacob et al., 2005).</p><p>Reference:</p><p>Jakob, M. (2005). A size classification for debris flows. Engineering geology, 79(3-4), 151-161.</p>

Bearing capacity factors for a conical footing using lower- and upper-bound finite elements limit analysis

Bearing capacity factors, Nc, Nq, and Nγ, for a conical footing are determined by using the lower and upper bound axisymmetric formulation of the limit analysis in combination with finite elements and optimization. These factors are obtained in a bound form for a wide range of the values of cone apex angle (β) and [Formula: see text] with δ = 0, 0.5[Formula: see text], and [Formula: see text]. The bearing capacity factors for a perfectly rough (δ = [Formula: see text]) conical footing generally increase with a decrease in β. On the contrary, for δ = 0°, the factors Nc and Nq reduce gradually with a decrease in β. For δ = 0°, the factor Nγ for [Formula: see text] ≥ 35° becomes a minimum for β ≈ 90°. For δ = 0°, Nγ for [Formula: see text] ≤ 30°, as in the case of δ = [Formula: see text], generally reduces with an increase in β. The failure and nodal velocity patterns are also examined. The results compare well with different numerical solutions and centrifuge tests’ data available from the literature.

Analytical Investigation of Elastic Thin-Walled Cylinder and Truncated Cone Shell Intersection Under Internal Pressure

An elastic solution of cylinder-truncated cone shell intersection under internal pressure is presented. The edge solution theory that has been used in this study takes bending moments and shearing forces into account in the thin-walled shell of revolution element. The general solution of the cone equations is based on power series method. The effect of cone apex angle on the stress distribution in conical and cylindrical parts of structure is investigated. In addition, the effect of the intersection and boundary locations on the circumferential and longitudinal stresses is evaluated and it is shown that how quantitatively they are essential.

Five Years Follow-up of Riboflavin/Ultraviolet A (370 nm) Corneal Collagen Cross-linking to Halt the Progression of Keratoconus

ABSTRACT Aims To determine the long-term efficacy and safety of riboflavin/ultraviolet a corneal cross-linking (CXL) to halt the progression of keratoconus. Materials and methods Thirty-five patients (35 eyes) who had undergone CXL with epithelial removal 5 or more years previously were examined. Results At 5 years, mean spherical equivalent (SEQ) increased by 0.78 diopters (D) (p < 0.001), mean simulated K (Sim K) reduced by 0.86D (p < 0.00001), cone apex power (CAP) reduced by 1.1D (p < 0.0002) and root mean square (RMS) (p < 0.0001), coma (p < 0.0001), and secondary astigmatism (p < 0.001) decreased compared to preoperative values. Compared to values at 1 year, mean refractive cylinder reduced by 0.26D (p < 0.05), mean Sim K reduced by 0.46D (p < 0.0005), CAP reduced by 0.81D (p < 0.01), RMS (p < 0.001), coma (p < 0.002) and secondary astigmatism (p < 0.02) reduced and central pachymetry increased (p < 0.05) at 5 years. No treated eyes showed evidence of progression at 5 years. None lost >1 line of CDVA. Eight untreated fellow eyes progressed during the follow-up period and underwent CXL. Conclusions Corneal cross-linking is an effective treatment to halt the progression of keratoconus at 5 years, with no sight-threatening complications. Improvements in topographic and wave-front indices present at 1 year continue to improve at 5 years. How to cite this article O’Brart PSD, Patel P, O’Brart NA. Five Years Follow-up of Riboflavin/Ultraviolet A (370 nm) Corneal Collagen Cross-linking to Halt the Progression of Keratoconus. Int J Kerat Ect Cor Dis 2014;3(2):63-68.

Beneficial Interface Geometry for Laser Joining of NiTi to Stainless Steel Wires

Joining the dissimilar metal pair of NiTi to stainless steel is of great interest for implantable medical applications. Formation of brittle intermetallic phases requires that the joining processes used for this dissimilar pair limits the amount of over-melting and mixing along the interface. Thus, because of its ability to precisely control heat input, laser joining is a preferred method. This study explores a method of using a cup and cone interfacial geometry, with no filler material, to increase the tensile strength of the joint. Not only does the cup and cone geometry increase the surface area of the interface, but it also introduces a shear stress component, which is shown to be beneficial to tensile strength of the wire as well. The fracture strength for various cone apex angles and laser powers is determined. Compositional profiles of the interfaces are analyzed. A numerical model is used for explanation of the processing parameters.