Vibration Separation Methodology Compensated by Time-Varying Transfer Function for Fault Diagnosis of Non-Hunting Tooth Planetary Gearbox

Due to planetary movement of planet gears, the vibration signal perceived by a stationary sensor is modulated and difficult to diagnose. This paper proposed a vibration separation methodology compensated by a time-varying transfer function (TVTF-VS), which is a further development of the vibration separation (VS) method in the diagnosis of non-hunting tooth planetary gearboxes. On the basis of VS, multi-teeth VS is proposed to extract and synthesize the meshing signal of a planet gear using a single transducer. Considering the movement regularity of a planetary gearbox, the time-varying transfer function (TVTF) is represented by a generalized expression. The TVTF is constructed using a segment of healthy signal and an evaluation indicator is established to optimize the parameters of the TVTF. The constructed TVTF is applied to overcome the amplitude modulation effect and highlight fault characteristics. After that, experiments with baseline, pitting, and compound localized faults planet gears were conducted on a non-hunting tooth planetary gearbox test rig, respectively. The results demonstrate that incipient failure on a planet gear can be detected effectively, and relative location of the local faults can be determined accurately.

Fault Diagnosis: Spectral Analysis of the Vibration Signals in Transfer Press

Fault diagnosis using vibration signals is a major challenge for industrial manufacturing. Obtaining defect information is an important step to make decisions about the maintenance in prognostic and health management systems. Existing studies mostly considers vibration signals collected from elements such as rolling element bearings and hydraulic presses. In this paper, we use the vibration signals obtained from the mechanical transfer press during metal forming process and analyze them from the signal processing point of view. Experimental results reveals that spectral analysis is a good candidate for fault diagnosis and it provides important information about the localized faults embedded in the vibration signals.

Dynamic Modeling and Analysis of Rolling Bearing with Compound Fault on Raceway and Rolling Element

Rolling element bearing is a very important part of mechanical equipment and widely used in rotating machinery. Rolling element bearings could appear localized defects during the working condition, which would cause the complex vibration response of bearings. Considering the shaft and bearing pedestal, a 4 degree-of-freedom (DOF) dynamic model of rolling bearing with compound localized fault is established based on time-varying displacement, and the vibration characteristics of rolling bearing with localized faults under different conditions are investigated. The established model is verified by the experimental vibration signals in time domain and frequency domain. The results show that the vibration response of compound fault is the result of the coupling action of a single fault of rolling element and outer race. The influences of compound fault on the vibration signals of the bearing were analyzed under three conditions. With the increasing of radial load, defect size, and rotation speed, the vibration amplitude of bearing would increase correspondently, which would accelerate the failure rate of bearing and reduce the service life of bearing. This model is helpful to analyze the vibration response of the rolling element bearing with single or compound fault.

Development of an Indicator for the Assessment of Damage Level in Rolling Element Bearings Based on Blind Deconvolution Methods

The monitoring of rolling element bearings through vibration-based condition indicators plays a crucial role in the modern machinery. The kurtosis is a very efficient indicator being sensitive to impulsive components within the vibration signature that often are symptomatic of localized faults. In order to improve the diagnostic performance of the kurtosis, blind deconvolution algorithms can be exploited in order to detect bearing faults and, most importantly, their position. In this scenario, this paper focuses on the development of a novel condition indicator specifically designed for the damage assessment in rolling element bearings. The proposed indicator allows to track the bearing degradation process taking into account three different possible positions: outer race, inner race, and rolling element. This indicator fits real-time monitoring procedures allowing for the automatic detection and identification of the bearing fault. The validation of the proposed indicator has been carried out by means of both simulated signal and a run-to-failure experiment. The results highlight that the proposed indicator is able to detect more efficiently the fault occurrence and, most importantly, quicker than other established techniques.

Diagnosis of Localized Faults in Multistage Gearboxes: A Vibrational Approach by Means of Automatic EMD-Based Algorithm

The gear fault diagnosis on multistage gearboxes by vibration analysis is a challenging task due to the complexity of the vibration signal. The localization of the gear fault occurring in a wheel located in the intermediate shaft can be particularly complex due to the superposition of the vibration signature of the synchronous wheels. Indeed, the gear fault detection is commonly restricted to the identification of the stage containing the faulty gear rather than the faulty gear itself. In this context, the paper advances a methodology which combines the Empirical Mode Decomposition and the Time Synchronous Average in order to separate the vibration signals of the synchronous gears mounted on the same shaft. The physical meaningful modes are selected by means of a criterion based on Pearson’s coefficients and the fault detection is performed by dedicated condition indicators. The proposed method is validated taking into account simulated vibrations signals and real ones.