Chiral Nano-Liquid Chromatography and Dispersive Liquid-Liquid Microextraction Applied to the Analysis of Antifungal Drugs in Milk

A novel chromatographic application in chiral separation by using the nano-LC technique is here reported. The chiral recognition of 12 antifungal drugs was obtained through a 75 µm I.D. fused-silica capillary, which was packed with a CSP-cellulose 3,5-dichlorophenylcarbamate (CDCPC), by means of a lab-made slurry packing procedure. The mobile phase composition and the experimental conditions were optimized in order to find the optimum chiral separation for some selected racemic mixtures of imidazole and triazole derivatives. Some important parameters, such as retention faction, enantioresolution, peak efficiency, and peak shape, were investigated as a function of the mobile phase (pH, water content, type and concentration of both the buffer and the organic modifier, and solvent dilution composition). Within one run lasting 25 min, at a flow rate of approximately 400 nL min−1, eight couples of enantiomers were baseline-resolved and four of them were separated in less than 25 min. The method was then applied to milk samples, which were pretreated using a classical dispersive liquid–liquid microextraction technique preceded by protein precipitation. Finally, the DLLME-nano-LC–UV method was validated in a matrix following the main FDA guidelines for bioanalytical methods.

Development of an In-Line Enzyme Reactor Integrated into a Capillary Electrophoresis System

The goal of this paper was to develop an in-line immobilized enzyme reactor (IMER) integrated into a capillary electrophoresis platform. In our research, we created the IMER by adsorbing trypsin onto the inner surface of a capillary in a short section. Enzyme immobilization was possible due to the electrostatic attraction between the oppositely charged fused silica capillary surface and trypsin. The reactor was formed by simply injecting and removing trypsin solution from the capillary inlet (~1–2 cms). We investigated the factors affecting the efficiency of the reactor. The main advantages of the proposed method are the fast, cheap, and easy formation of an IMER with in-line protein digestion capability. Human tear samples were used to test the efficiency of the digestion in the microreactor.

Co-Immobilized Capillary Enzyme Reactor Based on Beta-Secretase1 and Acetylcholinesterase: A Model for Dual-Ligand Screening

We have developed a dual enzymatic system assay involving liquid chromatography-mass spectrometry (LC–MS) to screen AChE and BACE1 ligands. A fused silica capillary (30 cm × 0.1 mm i.d. × 0.362 mm e.d.) was used as solid support. The co-immobilization procedure encompassed two steps and random immobilization. The resulting huAChE+BACE1-ICER/MS was characterized by using acetylcholine (ACh) and JMV2236 as substrates. The best conditions for the dual enzymatic system assay were evaluated and compared to the conditions of the individual enzymatic system assays. Analysis was performed in series for each enzyme. The kinetic parameters (KMapp) and inhibition assays were evaluated. To validate the system, galantamine and a β-secretase inhibitor were employed as standard inhibitors, which confirmed that the developed screening assay was able to identify reference ligands and to provide quantitative parameters. The combination of these two enzymes in a single on-line system allowed possible multi-target inhibitors to be screened and identified. The innovative huAChE+BACE1-ICER/MS dual enzymatic system reported herein proved to be a reliable tool to identify and to characterize hit ligands for AChE and BACE1 in an enzymatic competitive environment. This innovative system assay involved lower costs; measured the product from enzymatic hydrolysis directly by MS; enabled immediate recovery of the enzymatic activity; showed specificity, selectivity, and sensitivity; and mimicked the cellular process.

Comparison of Three Measurement Principles on Water Triple Oxygen Isotopologues

The widespread method for measuring Δ17O (17O-excess) is an offline CoF3 (Cobalt tri-fluoride) conversion of water to molecular oxygen with subsequent isotope determination by dual inlet mass spectrometry. High precisions for Δ17O measurements, using CoF3 water conversion, are so far only possible with off-line methods. Here we report on an improved and modified online continuous flow method intended for high precision triple oxygen isotope analysis. This method is improved by optimizing the reactor (site for conversion of H2O into oxygen through the chemical reaction) compositions, size of the fused silica capillary, flow regulator, and data treatment. Our modified online continuous method was further compared with the recently developed cavity ring down measurement principle. The precision is significantly better for the commercially available laser-based system than our current version of improved online CoF3 conversion method using mass spectrometry. Factors identified for limiting precision in our continuous flow system are: (i) compaction of the reactor with time that leads to the restriction of flow rate of carrier gas, (ii) the CoF3 treatment, (iii) the amount of CoF3 inside the reactor, (iv) the pore size of the steel frit, and (v) the metallic tube. Changes in all of these items as well as the dimension of the fused silica capillary, the positioning of the fused silica capillary in the open split, and the memory effect can also lead to a declining precision. These limiting factors for precision still provide us enough space for further improvement of our improved online method which will be worthwhile for the measurement of smaller aliquot samples as fluid inclusions for palaeoclimatic applications. With present improvement, multiple injections (n = 15 or even more) should be applied to obtain a precision better than 10 per meg for Δ17O. Furthermore, a comparison of the laser-based system with an improved conventional equilibration method has been made on precipitation samples originating from Jungfraujoch.

Evaluation of Enantioselective Capillary Electrophoretic Approach for the Enantiomeric Separation of Abscisic Acid

Background: The application of enantioselective capillary electrophoresis approach for the assessment of the enantiomeric purity of chiral molecules is receiving increased attention. Abscisic acid is one of the chiral sesquiterpenic plant growth regulators that regulate various ecological and physiological roles in higher plants. Enantiomeric determination of ABA is of great concern because of the different biological activity of its enantiomers. Materials and Methods: In this study, we investigated the enantioseparation selectivity of ABA by incorporating native β-cyclodextrins (β-CD) and its derivatives as chiral modifiers in the background electrolyte of an enantioselective capillary zone electrophoresis system. Electrophoretic aspects that affect the enantiomeric separation, such as pH, types of β-CD and its concentration, applied voltage, injection pressure and time, were studied and optimised. Results and Discussions: An enhancement in enantioseparation was achieved in a bare fused-silica capillary (64.5 cm × 50 mm i.d.) using a background electrolyte solution consisting of (2-hydroxypropyl)- β-CD (80 mM) solubilised in 100 mM phosphate buffer adjusted to pH 5.9 with NaOH, operated under normal polarity mode (25 kV) at 25°C, and using hydrodynamic injection (75 mbar for 10s). Relative standard deviations of (intra- and inter-day) ≤ 3.23% and ≤ 1.39% for migration times and enantiomeric fractions (EF) were achieved using the proposed method. Conclusion: The proposed chiral capillary electrophoretic method offers advantages in terms of enantioselectivity and analysis times, which can serve as a reliable platform for the stereoisomeric analysis of ABA.

Solubility of Na2SO4 in silica-saturated solutions: Implications for REE mineralization

Sulfate is traditionally considered to have retrograde solubility in aqueous solutions. However, our recent hydrothermal diamond-anvil cell (HDAC) experiments have shown that the solubility of Na2SO4 changes from retrograde to prograde in the presence of silica, leading to the formation of sulfate-rich solutions at high temperatures, in line with observations on natural geofluids. In this study, we use synthetic inclusions of fused silica capillary capsules containing saturated Na2SO4 solutions and Na2SO4 crystals to quantitatively investigate the solubility of Na2SO4 at different temperatures in the Na2SO4-SiO2-H2O system. Sulfate concentrations were measured using Raman spectroscopy and calibrated using Cs2SO4 solutions with known concentrations. The solubility of crystalline Na2SO4 dropped slightly when heated from 50 to 225 °C and dramatically from 225 to 313 °C. At 313 °C, the Na2SO4 crystals began to melt, forming immiscible sulfate melt coexisting with the aqueous solution, with or without solid Na2SO4. With the formation of sulfate melt, the solubility of Na2SO4 was reversed to prograde (i.e., solubility increased considerably with increasing temperatures). The solubility of Na2SO4 in the measured solution was significantly higher than that predicted in the absence of SiO2 over the entire temperature range (except for temperatures around 313 °C). This indicates that the presence of SiO2 greatly changes the dissolution behavior of Na2SO4, which may be caused by the formation of a sulfate–silicate intermediates such as Si(OH)4SO42−. Considering that most crustal fluids are silica-saturated, the solubility curve of Na2SO4 obtained in this study can better reflect the characteristics of geofluids when compared to that of Na2SO4-H2O binary system. At temperatures of 313–425 °C, the solubility of Na2SO4 increases with temperature following the function Csulfate = –3173.7/T + 5.9301, where Csulfate and T represent the solubility of Na2SO4 in mol/kg H2O and temperature in Kelvin, respectively. As an application, this temperature-solubility relationship can be used to evaluate the sulfate contents in fluid inclusions that contain sulfate daughter minerals, based on the temperature of sulfate disappearance obtained from microthermometric analysis. The sulfate concentrations of the ore-forming fluids of the giant Maoniuping carbonatite-related rare earth element (REE) deposit (southwest China) were calculated to be 4.67–4.81 m (mol/kg H2O). These sulfate concentrations were then used as internal standards to calibrate the previously reported semi-quantitative results of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) analysis of REE-forming stage fluid inclusions at this deposit. The calculated Ce concentrations in the REE-mineralizing fluid range from 0.42 to 0.49 wt%. The high fluid REE contents suggest that the sulfate-rich fluids are ideal solvents for REE transport. A mass-balance calculation was carried out to evaluate the minimal volume of carbonatite melt that was required for the formation of the giant Maoniuping REE deposit. The result indicates that the carbonatite dikes in the mining area are enough to provide the required fluids and metals, and thus a deep-seated magma chamber is not necessary for ore formation.