Recent Advances in Hollow Cathode Technology for Plasma-Enhanced ALD—Plasma Surface Modifications for Aluminum and Stainless-Steel Cathodes

Recent designs have allowed hollow cathode gas plasma sources to be adopted for use in plasma-enhanced atomic layer deposition with the benefit of lower oxygen contamination for non-oxide films (a brief review of this is provided). From a design perspective, the cathode metal is of particular interest since—for a given set of conditions—the metal work function should determine the density of electron emission that drives the hollow cathode effect. However, we found that relatively rapid surface modification of the metal cathodes in the first hour or more of operation has a stronger influence. Langmuir probe measurements and hollow cathode electrical characteristics were used to study nitrogen and oxygen plasma surface modification of aluminum and stainless-steel hollow cathodes. It was found that the nitridation and oxidation of these metal cathodes resulted in higher plasma densities, in some cases by more than an order of magnitude, and a wider range of pressure operation. Moreover, it was initially thought that the use of aluminum cathodes would not be practical for gas plasma applications, as aluminum is extremely soft and susceptible to sputtering; however, it was found that oxide and nitride modification of the surface could protect the cathodes from such problems, possibly making them viable.

Monitoring the plasmapause dynamics at LEO

<p>In the past decades researchers have revealed links between a series of sub-auroral ionospheric phenomena and the plasmapause (PP) dynamics, such as the mid-latitude ionospheric trough (MIT) and the associated sub-auroral temperature enhancement (SETE), the light-ion trough (LIT), the sub-auroral ion drift (SAID) or the more intense sub-auroral polarisation stream (SAPS), and most recently, the inner boundary of small-scale field-aligned currents (SSFACs). Most of these phenomena can be directly observed by the Swarm constellation of ESA at LEO. Thus, Swarm presents a unique opportunity to study the relations between them and also their relation to the PP dynamics.</p><p>In a recent Swarm DISC project, PRISM (Plasmapause Related boundaries in the topside Ionosphere as derived from Swarm Measurements), three new products have been developed. Two products characterise the MIT (and the associated SETE). The MITx_LP utilises the Langmuir probe measurements of electron density and temperature, while the MITxTEC product derives the MIT properties from GPS TEC observations. The third product, PPIxFAC provides information on the location and the main characteristics of the equatorial boundary of SSFACs, and it also includes a proxy for the location of the PP at MLT midnight.</p><p>In this presentation we introduce the above Swarm L2 products, present the results of a comparative study aiming at revealing their mutual relations and also their dynamic coupling to the PP. Then we demonstrate how the observations of all these ionospheric phenomena combined can be used to develop an improved proxy for monitoring the PP dynamics at LEO as one of the goals of our new ESA-funded project PLASMA.</p>

Monitoring and Modelling of ionospheric disturbances by means of GRACE, GOCE and Swarm in-situ observations

<p>The main objective of the ESA-funded project COSTO (Contribution of Swarm data to the prompt detection of Tsunamis and other natural hazards) is to better characterize, understand and discover coupling processes and interactions between the ionosphere, the lower atmosphere and the Earth’s surface as well as sea level vertical displacements. Together with our project partners from the University of Warmia and Mazury (UWM), the National Observatory of Athens (NOA) and the Universitat Politecnica de Catalunya (UPC) we focus in COSTO to tsunamis that are the result of earthquakes (EQ), volcano eruptions or landslides.</p><p>In the scope of COSTO a roadmap was developed to detect the vertical and horizontal propagation of Travelling Ionospheric Disturbances (TID) in the observations of Low Earth Orbiting (LEO) satellites. Under the assumption that the TIDs triggered by tsunamis behave in approximately the same way for different EQ / tsunami events, this roadmap can be applied also to other events. In this regard, the Tohoku-Oki EQ in 2011 and the Chile EQ in 2015 were studied in detail. The aim of investigating these events is to detect the TIDs in the near vicinity of the propagating tsunami. Thereby, given tsunami propagation models serve as a rough orientation to determine the moments in time and positions for which there is co-location with selected LEO satellites/missions, namely GRACE, GOCE and Swarm. GOCE with an altitude of around 280km and the GRACE satellites with an altitude of around 450km flew over the region where the Tohoku-Oki tsunami was located, about 2.5 hours after the EQ. Using wavelet transform, similar signatures with periods of 10-30 seconds could be detected in the top-side STEC observations of GOCE as well as in the Ka-band observations of GRACE at the time of the overflight. These signatures can be related to the gravity wave originating from the tsunami. Similar signatures were detected in the signals from the GRACE Ka-band observations and in the Swarm Langmuir Probe measurements at an altitude of 450 km for the 2015 Chile tsunami. These roadmap studies provided the first opportunity to observe the vertical and horizontal tsunami induced gravity waves in the ionosphere.</p>