Regional stratigraphy and proximal to distal variation of lithology and porosity within a mixed carbonate-siliciclastic system, Mississippian strata of northern and central Oklahoma

2021 ◽  
pp. 1-56
Author(s):  
Katherine A. Drummond ◽  
Matthew J. Pranter ◽  
Michael G. Grammer
Keyword(s):  
Clay Content ◽  
Total Porosity ◽  
Carbonate Content ◽  
Well Log ◽  
Sea Level Fluctuations ◽  
Rock Types ◽  
Subaerial Exposure ◽  
Calcite Cement ◽  
Artificial Neural Network Ann ◽  
Siliceous Shale

Mississippian carbonate and silica-rich reservoirs of northern and central Oklahoma formed along a regionally extensive carbonate ramp to basin transect. The stratigraphy, lithology, and porosity characteristics of the Mississippian Meramec and Osage series vary significantly as older ramp carbonates prograde southward and transition into younger calcareous and quartz-rich silt deposits of the Anadarko Basin. Lithofacies identified within the northern carbonate-dominated portion of the system commonly include altered chert, skeletal grainstones, peloidal packstones-grainstones, bioturbated wackestones-packstones, bioturbated mudstones-wackestones, glauconitic sandstones, and siliceous shale. Lithofacies within the southern siliciclastic-dominated portion of the system include structureless to bioturbated sandstones, siltstones, and laminated mudstones, each with varying degrees of carbonate content. We group these core-based lithofacies into dominant lithologies/rock types which tie to well-log properties. Electrofacies classification methods including Artificial-Neural Network (ANN) and k-means clustering predict lithologies in non-cored wells. ANNs yielded the highest overall prediction accuracy of 85% for lithologies. Core, well log, and lithology log data establish the regional stratigraphic framework. In this study, the Mississippian interval of interest subdivides into sixteen stratigraphic zones. A depositional-dip oriented cross section and associated reservoir models illustrate both proximal to distal and stratigraphic variability of lithology and porosity. Lithology trends moving from north to south, from older to younger strata, reveal a carbonate-dominated succession capped by diagenetically altered chert northward shifting into a siliciclastic-dominated interval, which increases in clay content southward. Northward, prospective conventional reservoirs developed near cycle tops within diagenetically replaced cherts and cherty limestones associated with subaerial exposure and sea-level fluctuations. Southward, higher total porosity associates with increased clay content linked to the suppression of calcite cement, forming prospective unconventional targets near the bases of depositional cycles.

scholarly journals Multiscale Characterization of the Caney Shale — An Emerging Play in Oklahoma

2021 ◽  
Vol 2 ◽  
pp. 33-53
Author(s):  
Yulun Wang ◽  
Guofan Luo ◽  
Mercy Achang ◽  
Julie Cains ◽  
Conn Wethington ◽  
...  
Keyword(s):  
Clay Content ◽  
High Energy ◽  
Rock Properties ◽  
Carbonate Content ◽  
Petrographic Analysis ◽  
Thin Sections ◽  
X Ray ◽  
Rock Types ◽  
Rebound Hardness

From a hydrocarbon perspective, the Caney Shale has historically been evaluated as a sealing unit, which resulted in limited studies characterizing the rock properties of the Caney Shale and its suitability for hydraulic fracturing. The objective of our research is to help bridge the current knowledge gap through the integration of multiscale laboratory techniques and to characterize the macro- and microscale rock properties of the Caney Shale. We employed an integrated approach for the characterization of the Caney using 200 ft (61 m) of Caney core from a target well in southern Oklahoma. Core observation and petrographic analysis of thin sections were combined to characterize the general rock types and associated fabrics and textures. Mineralogical composition, pore system architecture, and rock fabric were analyzed using x-ray diffraction (XRD), scanning electron microscopy/energy dispersive x-ray spectroscopy (SEM/EDS), and focused ion beam (FIB)-SEM. In addition, rebound hardness and indentation testing were carried out to determine rock hardness (brittleness) and elasticity, respectively. With the integrated multiscale characterization, three mixed carbonate-siliciclastic rock types were identified — mudstone, calcareous siltstone, and silty carbonate — likely representing a spectrum of deposition from low to relatively high energy environments in the distal portions of a ramp system. Silty carbonate contains mostly interparticle pores. The calcareous siltstones and silty mudstones contain a combination of organic matter pores and interparticle pores. Each of the rock types shows unique mineralogical compositions based on XRD. The mudstone lithofacies has the highest clay content and the least carbonate content. Calcareous siltstones show moderate carbonate and clay content. Silty carbonate indicates the highest carbonate content with the least clay content. In an order of mudstone, calcareous siltstone, and silty carbonate, rebound hardness and Young’s modulus show an increasing trend. As a result of rock-fluid interactions, there are potential scaling reactions during completion and production that could ultimately affect permeability and production rates. Overall, the proposed multiscale integration approach is critical for the geologic characterization of most rocks. However, in shale reservoirs dominated by microporosity and microstructure where engineered fractures are expected to provide permeability at a reservoir scale, successful integration is essential. An optimized, integrated geological characterization of the Caney Shale that is well aligned with the engineering designs in drilling, completing, and producing wellbores will ultimately lead to optimal production while providing safe and environmentally responsible operations.

scholarly journals Lithofacies, diagenesis and reservoir quality of Upper Shu’aiba reservoirs in northwestern Oman

GeoArabia ◽  
2014 ◽  
Vol 19 (4) ◽  
pp. 145-182
Author(s):  
Naima Al Habsi ◽  
Mohammed Al Shukaili ◽  
Sabah Al Tooqi ◽  
Stephen N. Ehrenberg ◽  
Michaela Bernecker
Keyword(s):  
Gamma Ray ◽  
Clay Content ◽  
Total Porosity ◽  
Bulk Rock ◽  
Vertical Wells ◽  
Wide Range ◽  
Saddle Dolomite ◽  
Lower Porosity ◽  
Local Supply ◽  
Calcite Cement

ABSTRACT Core and log data from Lower Cretaceous limestones of the Upper Shu’aiba Member were used to characterize the distribution of lithofacies, clay and porosity within two low-angle clinoforms that form the reservoirs for an oilfield of northwestern Oman. Data from 15 vertical wells, including four with core, and four horizontal well cores were projected into a dip-oriented cross-section derived from a static reservoir model as a basis for visualizing the above variations. Each clinoform consists of a basal “argillaceous zone” and a thicker “reservoir zone” of clean limestone, together reflecting fourth-order cycles of progradation along the margin of the Bab intra-shelf basin. Lithofacies vary in a proximal direction from mudstone and wackestone (mid-ramp) to mud-dominated packstone (slope) to mud-rich floatstone, rudstone and boundstone (ramp crest) and are arranged in a pattern of decreasing water depth and increasing energy both upwards and landward within each clinoform. In contrast, the reservoir zone of a younger clinoform from a nearby oilfield consists of well-sorted grainstone and grain-dominated packstone, illustrating the wide range of depositional conditions that occurred in the ramp-crest facies belt of different units. Except within the proximal extent of the younger clinoform, where values are transitional toward reservoir zone values, the argillaceous zones have total porosity mostly < 10% and baseline-normalized gamma-ray (GR) activity > 23 API units, reflecting clay contents of around 10–18%. In contrast, most parts of the reservoir zones have GR of 15–23 API units and porosity of 10–35%. Higher clay content is suggested to be linked with lower porosity through facilitation of both mechanical and chemical compaction, the latter providing a local supply of calcite cement. XRD analyses show that the clays are kaolin, illite/smectite and illite, similar to the clays in the overlying Nahr Umr shale. Most former macropores have been filled by blocky calcite cement in the main oilfield studied, but all lithofacies have similar wide ranges of total porosity of 8% to > 30%. The cores were also studied for evidence of diagenesis related to the contact with the overlying Nahr Umr Formation, but profiles of stable-isotope ratios, bulk-rock strontium, petrography and porosity-permeability data show no trends indicative of upward-increasing meteoric diagenesis below this sequence boundary. Meteoric leaching could nevertheless be pervasive throughout the Upper Shu’aiba reservoirs, at least partially accounting for extensive aragonite dissolution and low Sr and δ18O values. Two of the cores show trends of upwards-increasing bulk-rock uranium, manganese and iron, possibly indicative of sea-floor authigenesis. In addition, saddle dolomite near the tops of these cores may reflect late influx of magnesium derived from clay in the Nahr Umr Formation.

scholarly journals Mississippian Meramec Lithologies and Petrophysical Property Variability,STACK Trend, Anadarko Basin, Oklahoma

2021 ◽  
pp. 1-59
Author(s):  
Michael J. Miller ◽  
Matthew J. Pranter ◽  
Ishank Gupta ◽  
Deepak Devegowda ◽  
Kurt J. Marfurt ◽  
...  
Keyword(s):  
Pore Volume ◽  
Water Saturation ◽  
Rock Type ◽  
Clay Content ◽  
Anadarko Basin ◽  
Rock Types ◽  
Lower Porosity ◽  
Artificial Neural Network Ann ◽  
Type 3 ◽  
Maximum Flooding Surface

Mississippian Meramec reservoirs of the STACK (Sooner Trend in the Anadarko [Basin] in Canadian and Kingfisher counties) play are comprised of silty limestones, calcareous siltstones, argillaceous-calcareous siltstones, argillaceous siltstones and mudstones. We found that core-defined reservoir lithologies are related to petrophysics-based rock types derived from porosity-permeability relationships using a flow-zone indicator approach. We classified lithologies and rock types in non-cored wells using an Artificial Neural Network (ANN) with overall accuracies of 93% and 70%, respectively. We observed that mudstone-rich rock type 1 exhibits high clay and low calcite while calcareous-rich rock type 3 has high calcite and low clay content with rock type 2 falling in between rock types 1 and 3. Results of the ANN were applied to a suite of well logs in non-cored wells in which we generated lithology and rock-type logs. We identified that the Meramec consists of seven stratigraphic units characterized as strike-elongate, shoaling-upward parasequences; each parasequence is capped by a marine-flooding surface. The lower three parasequences (lower Meramec) form a retrogradational parasequence set that back-steps to the northwest and is capped by a maximum flooding surface. The upper Meramec is characterized by parasequences that form an aggradational to progradational stacking pattern followed again by a retrogradational trend. We predict that the parasequence stacking, associated lithology distribution, and diagenetic cements appear to control the spatial distribution of petrophysical properties (porosity, permeability, water saturation), pore volume, and hydrocarbon pore volume (HCPV). Calcareous-rich lithologies exhibit lower porosity, permeability, and HCPV and higher water saturation. Argillaceous-rich lithologies that occur near the maximum flooding surface are the most favorable reservoir intervals as they exhibit relatively higher porosity, permeability, HCPV, and lower water saturation. Productivity could not be directly correlated to rock types as operational and completion factors along with overpressure and oil phase play important roles on production.

scholarly journals Wave Propagation Characteristics in Gas Hydrate-Bearing Sediments and Estimation of Hydrate Saturation

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 804
Author(s):  
Lin Liu ◽  
Xiumei Zhang ◽  
Xiuming Wang
Keyword(s):  
Gas Hydrate ◽  
Clay Content ◽  
Clean Energy ◽  
Compressional Wave ◽  
Physical Parameters ◽  
Well Log ◽  
Log Data ◽  
Phase Velocities ◽  
Hydrate Saturation ◽  
Hydrate Bearing Sediments

Natural gas hydrate is a new clean energy source in the 21st century, which has become a research point of the exploration and development technology. Acoustic well logs are one of the most important assets in gas hydrate studies. In this paper, an improved Carcione–Leclaire model is proposed by introducing the expressions of frame bulk modulus, shear modulus and friction coefficient between solid phases. On this basis, the sensitivities of the velocities and attenuations of the first kind of compressional (P1) and shear (S1) waves to relevant physical parameters are explored. In particular, we perform numerical modeling to investigate the effects of frequency, gas hydrate saturation and clay on the phase velocities and attenuations of the above five waves. The analyses demonstrate that, the velocities and attenuations of P1 and S1 are more sensitive to gas hydrate saturation than other parameters. The larger the gas hydrate saturation, the more reliable P1 velocity. Besides, the attenuations of P1 and S1 are more sensitive than velocity to gas hydrate saturation. Further, P1 and S1 are almost nondispersive while their phase velocities increase with the increase of gas hydrate saturation. The second compressional (P2) and shear (S2) waves and the third kind of compressional wave (P3) are dispersive in the seismic band, and the attenuations of them are significant. Moreover, in the case of clay in the solid grain frame, gas hydrate-bearing sediments exhibit lower P1 and S1 velocities. Clay decreases the attenuation of P1, and the attenuations of S1, P2, S2 and P3 exhibit little effect on clay content. We compared the velocity of P1 predicted by the model with the well log data from the Ocean Drilling Program (ODP) Leg 164 Site 995B to verify the applicability of the model. The results of the model agree well with the well log data. Finally, we estimate the hydrate layer at ODP Leg 204 Site 1247B is about 100–130 m below the seafloor, the saturation is between 0–27%, and the average saturation is 7.2%.

scholarly journals Landslides in weakly cemented glaciolacustrine sediments, Morkill River valley, British Columbia

2001 ◽  
Vol 38 (4) ◽  
pp. 889-900 ◽  
Author(s):  
Corey R Froese ◽  
David M Cruden
Keyword(s):  
British Columbia ◽  
River Valley ◽  
Carbonate Content ◽  
Canadian Rocky Mountains ◽  
Density Profiles ◽  
Frost Action ◽  
Dominant Component ◽  
Freeze And Thaw ◽  
Calcite Cement ◽  
The Relationship

Slopes in weakly cemented glaciolacustrine sediments in the Morkill River valley in the Canadian Rocky Mountains stand at up to 70°. Based on field and laboratory observations it appears that a contributing factor to instability is the softening of the soils by frost action and the leaching of calcite cement. Field density profiles demonstrated increased density and carbonate content with an increase in depth. Laboratory tests of carbonate content indicated a positive correlation between calcium carbonate and density in the glaciolacustrine sediments. The relationship was strongest in sands, in which leaching and dissolution were important components of softening. In clays, frost action was the dominant component of softening. Freeze-thaw tests showed a 50% decrease in strength after one cycle of freeze and thaw in the silts and clays.Key words: landslide, cemented, glaciolacustrine sediments, British Columbia.

scholarly journals Contrasting pH buffering patterns in neutral-alkaline soils along a 3600 km transect in northern China

2015 ◽  
Vol 12 (16) ◽  
pp. 13215-13240 ◽  
Author(s):  
W. Luo ◽  
P. N. Nelson ◽  
M.-H. Li ◽  
J. Cai ◽  
Y. Zhang ◽  
...  
Keyword(s):  
Soil Ph ◽  
Large Scale ◽  
Aridity Index ◽  
Clay Content ◽  
Northern China ◽  
Buffering Capacity ◽  
Carbonate Content ◽  
Alkaline Soils ◽  
Ph Buffering ◽  
Initial Ph

Abstract. Soil pH buffering capacity (pHBC) plays a crucial role in predicting acidification rates, yet its large-scale patterns and controls are poorly understood, especially for neutral-alkaline soils. Here, we evaluated the spatial patterns and drivers of pHBC along a 3600 km long transect (1900 km sub-transect with carbonate containing soils and 1700 km sub-transect with non-carbonate containing soils) across northern China. Soil pHBC was greater in the carbonate containing soils than in the non-carbonate containing soils. Acid addition decreased soil pH in the non-carbonate containing soils more markedly than in the carbonate containing soils. Within the carbonate soil sub-transect, soil pHBC was positively correlated with cation exchange capacity (CEC), carbonate content and exchangeable sodium (Na) concentration, but negatively correlated with initial pH and clay content, and not correlated with soil organic carbon (SOC) content. Within the non-carbonate sub-transect, soil pHBC was positively related to initial pH, clay content, CEC and exchangeable Na concentration, but not related to SOC content. Carbonate content was the primary determinant of pHBC in the carbonate containing soils and CEC was the main determinant of buffering capacity in the non-carbonate containing soils. Soil pHBC was positively related to aridity index and carbonate content across the carbonate containing soil sub-transect. Our results indicated that mechanisms controlling pHBC differ among neutral-alkaline soils of northern China, especially between carbonate and non-carbonate containing soils, leading to different rates, risks, and impacts of acidification. This understanding should be incorporated into the acidification risk assessment and landscape management in a changing world.

scholarly journals Stratigraphic variability of Mississippian Meramec chemofacies and petrophysical properties using Machine Learning and geostatistical modeling,STACK trend, Anadarko Basin, Oklahoma

2021 ◽  
pp. 1-59
Author(s):  
Laynie Hardisty ◽  
Matthew J. Pranter ◽  
Deepak Devegowda ◽  
Kurt J. Marfurt ◽  
Carl Sondergeld ◽  
...  
Keyword(s):  
Water Saturation ◽  
Development Planning ◽  
Effective Porosity ◽  
Well Logs ◽  
Blind Test ◽  
Cross Sectional ◽  
Anadarko Basin ◽  
Rock Types ◽  
Calcite Cement ◽  
Stacking Patterns

Mississippian Meramec deposits and reservoirs in the Sooner Trend in the Anadarko (Basin) in Canadian and Kingfisher counties (STACK) play of central Oklahoma are comprised of silty limestones, calcareous sandstones, argillaceous-calcareous siltstones, argillaceous siltstones, and mudstones. We have used core-derived X-ray fluorescence (XRF) data and established environmental proxies to evaluate the occurrence of specific elements (Al, K, Ti, Zr, Sr, Ca, and Si) and to illustrate their stratigraphic variability. For the Mississippian Meramec, six indicator elements or element ratios serve as proxies for clay (Al and K), detrital sediment (Ti and Zr), carbonate deposits (Sr and Ca), calcite cement (Sr/Ca), and biogenic and continentally derived quartz (Si/Ti and Si/Al). We used an unsupervised K-means classification to cluster elemental data from which we interpret three chemofacies: (1) calcareous sandstone, (2) argillaceous-calcareous siltstone, and (3) detrital mudstone. We used a random forest approach to relate core-derived chemofacies to well logs and classify chemofacies in noncored wells with an accuracy of up to 83% based on blind test results. We integrated core-derived XRF, conventional well logs, and chemofacies logs to produce a dip-oriented cross-sectional chemofacies model that trends from the northwest to the southeast across the southern STACK trend. Meramec chemofacies distributions reflect parasequence stacking patterns. The stratigraphic variability of chemofacies indicates an upward increase of argillaceous detrital mudstone from parasequences 1 to 3. Parasequence 3 is capped by a maximum flooding surface. From parasequences 4 to 5, an increase in argillaceous-calcareous siltstone and calcareous sandstone reflects the progradational stacking. Porosity is relatively low in calcareous sandstones primarily due to calcite cement. Water saturation is high in argillaceous-calcareous siltstone, moderate in calcareous sandstone, and low in detrital mudstone. Within the Meramec, biogenic quartz is associated with drilling issues, specifically frequent bit trips due to its hardness. Interpreted biogenic quartz from element profiles corresponds to the calcareous sandstone chemofacies, which can be estimated from triple-combo well logs and can be mapped. Effective porosity and water saturation models reflect the stratigraphic variability of chemofacies and rock types and can be predicted within the defined chemostratigraphic framework. Understanding the spatial variability of effective porosity and water saturation is important for reservoir development planning.

Adaptation of Lupinus angustifolius L. and L. pilosus Murr. to calcareous soils

1999 ◽  
Vol 50 (6) ◽  
pp. 1027 ◽  
Author(s):  
J. D. Brand ◽  
C. Tang ◽  
A. J. Rathjen
Keyword(s):  
Calcareous Soils ◽  
South Australia ◽  
Clay Content ◽  
Dry Weight ◽  
Lupinus Angustifolius ◽  
Nutrient Concentrations ◽  
Carbonate Content ◽  
Soil Factors ◽  
Shoot Dry Weight ◽  
Caco3 Content

Current varieties of narrow-leafed lupin (Lupin angustifolius L.) are poorly adapted to alkaline and calcareous soils found commonly throughout the south-estern Australian cropping zone. Apot experiment compared the growth of Lupinus angustifolius cv. Gungurru with L. pilosus P20954 in a range of soils collected throughout South Australia. The soils displayed a range of texture (clay, 3–82%), pH (1:5 soil:H2O, 7·0–9·6), and calcium carbonate content (CaCO3, 0–47%). Potting mix (pH 5·8) was used as the control. The plants were grown for 7 weeks with weekly measurements of chlorosis score and leaf number. At harvest, dry weights were recorded and the youngest fully expanded leaves were analysed for nutrient concentrations. The line P20954 grew much better in all the soils than Gungurru in terms of plant dry weight relative to the control soil, this being particularly evident in the calcareous soils. Chlorosis score correlated highly with shoot dry weight for Gungurru, but not for P20954. The main soil factor contributing to the chlorosis score of Gungurru was CaCO3 content, whereas none of the soil factors significantly affected P20954, although in Weeks 2 and 3 chlorosis score correlated with CaCO3 content. The dry weight of Gungurru was affected by a combination of factors including clay content, pH, and CaCO3 content, whereas the dry weight of P20954 was affected by most of the soil factors measured. The dry weight of P20954 was positively correlated with aluminium and magnesium concentrations. Concentrations of all nutrients were above critical levels for both genotypes grown in all soils. The results indicate that L. pilosus has the potential to be grown in areas where current varieties of L. angustifolius are poorly adapted.

Rock types from cores and well-log electrofacies in support of regional reservoir fairways mapping: The Hanifa Formation, Saudi Arabia

2008 ◽  
Author(s):  
David Z. Tang ◽  
Tom Harland ◽  
Paul Lawrence ◽  
Greg Gregory ◽  
Abdel Fattah Bakhiet and Abdel Ghayoum Ahmed
Keyword(s):  
Saudi Arabia ◽  
Well Log ◽  
Rock Types

scholarly journals Total Porosity Measured for Shale Gas Reservoir Samples: A Case from the Lower Silurian Longmaxi Formation in Southeast Chongqing, China

Minerals ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 5 ◽  
Author(s):  
Fangwen Chen ◽  
Shuangfang Lu ◽  
Xue Ding ◽  
Hongqin Zhao ◽  
Yiwen Ju
Keyword(s):  
Shale Gas ◽  
Clay Content ◽  
Total Porosity ◽  
Gas Reservoir ◽  
Longmaxi Formation ◽  
Fine Grained ◽  
Average Value ◽  
Lower Silurian ◽  
Shale Gas Reservoir ◽  
Research Institute

Measuring total porosity in shale gas reservoir samples remains a challenge because of the fine-grained texture, low porosity, ultra-low permeability, and high content of organic matter (OM) and clay mineral. The composition content porosimetry method, which is a new method for the evaluation of the porosity of shale samples, was used in this study to measure the total porosity of shale gas reservoir samples from the Lower Silurian Longmaxi Formation in Southeast Chongqing, China, based on the bulk and grain density values. The results from the composition content porosimetry method were compared with those of the Gas Research Institute method. The results showed that the composition content porosimetry porosity values of shale gas reservoir samples range between 2.05% and 5.87% with an average value of 4.04%. The composition content porosimetry porosity generally increases with increasing OM and clay content, and decreases with increasing quartz and feldspar content. The composition content porosimetry results are similar to the gas research institute results, and the differences between the two methods range from 0.05% to 1.52% with an average value of 0.85%.

Sign in / Sign up

Export Citation Format

Share Document