Analysis of Attributes that Become Consumer Preferences in Choosing Indonature Table Furniture Products

Ud. Indonature is a company engaged in furniture, especially coffee table located on the island of Lombok, West Nusa Tenggara. Furniture made of solid wood such as Teak and Trembesi wood. In recent years there has been a decrease in the company’s turnover therefore it takes product innovation to increase sales. With the need to develop coffee table furniture products more clearly, researchers decided to conduct research on Attribute Analysis that Becomes Consumer Preferences in Choosing Indonature Table Furniture Products. This study aims to find out and analyze the combination of attributes that become consumer preferences in purchasing Indonature coffee table products and to know and analyze the most important coffee table attributes for Indonature consumers. The problem formulation in this study is, firstly, what combination of attributes are the consumer preference in buying coffee table into nature products and the second is what are the most important attributes of coffee table products for indonature consumers. The results of conjoin analysis showed that the most preferred and most important combination according to consumers is made of trembesi wood material with arch form, has a natural wood finishing and rustic design.

Personal Identification using Odontometry and Palatoscopy: A Pakistani Perspective

Aim: To determine the most common rugae pattern and to find if it has any association with dental arch form or malocclusion. Study Design and setting: It was a retrospective cross-sectional study conducted using the records of 200 patients visiting the Orthodontic Outpatient department of Bahria University Medical and Dental College. Methodology: Number, size, orientation and pattern of palatal rugae were assessed on the plaster models. Dental malocclusion along with dental arch form and width were also evaluated. Descriptive statistics such as frequencies were analyzed. Chi square, Fischer exact test and One Way ANOVA was used to see the significance of differences, p≤0.05 was considered as significant. Results: The sample comprised of class I (n=97), class II(n=87) and class III(n=16).113 cases had inter-molar width >44mm while 87 had ≤44mm. Posterior orientation of the rugae, was pre-dominant for both right (n=100) and left (n=122) first rugae. The most common pattern was curved for both first rugae on right (n=66) and left (n=72) sides. Conclusion: Our study showed that the rugae pattern, size and numbers did not show significant variation in different malocclusion classes. It can be concluded that rugae pattern do not have any significant association with malocclusion class or arch form. Keywords: Arch form, Arch width, Forensic dentistry, Malocclusion, Palatal Rugae

Comparison of commercially available preformed archwires with average natural arch forms

Objective: The research was carried out to compare the dimensions of commercially available preformed archwires with natural arch forms of Pakistani subjects. Methods: An observational study that lasted for 6 months was conducted at AFID, Rawalpindi. Fifty-two maxillary and mandibular dental casts of orthodontically untreated subjects (26 males and 26 females) were evaluated to obtain arch dimensions at the canines and first molar levels with the help of digital Vernier calipers. Bracket-archwire assembly was constructed to accurately measure widths from bracket-slot (BS) points at both the canine and molar levels, in an attempt to mimic clinical archwire-bracket interface. Canine and molar depths were also recorded for accurate estimation of the digitized archwire widths at the aforementioned levels. Results: The archwires evaluated for maxilla were significantly wider at canines (42.16 ±1.84mm, p = 0.000) and first molars (58.45 ± 1.33mm, p = 0.014) compared to the canine and molar dimensions of the dental casts obtained from subjects (37.61 ± 3.75mm, 55.68 ± 4.05mm respectively). For mandible, statistically significant differences were found at the canine level where archwires (34.75 ± 1.66mm, p = 0.000) exhibited greater dimensions than mean intercanine widths (29.33 ± 3.35mm) of the subjects. Conclusion: At present, commercially obtainable preformed archwires are inconsistent with the diverse arch forms manifested in a group of subjects with almost ideal occlusion. Therefore; utilization of these archwires may create unwarranted wider dimensions of the arch form, especially in the intercanine region which can influence post treatment retention, stability and facial esthetics. Continuous..

Correlation of Three Dimensions of Palate with Maxillary Arch Form and Perimeter as Predictive Measures for Orthodontic and Orthognathic Surgery

Hard palate is regarded as an important part of the human skull, which contributes to the separation of the oral and nasal cavities. The aims of the study were to investigate the morphology of the hard palate in order to create a general guideline of three-dimensional values of the palate in a Kurdish sample in the city of Sulaimani as well as determining the possible correlations between different palatal parameters in class I malocclusion with the maxillary arch form and perimeter. A retrospective study design was adopted by collecting 100 study models of orthodontic patients aged 16–24 years old attending different private dental clinics in the city of Sulaimani seeking orthodontic management. In this study, three-dimensional palatal measurements including depth, length, and width were measured in an attempt to discover their correlation with each maxillary arch form and perimeter. Additionally, measurements of inter-molar width, inter-canine width, and arch perimeter were carried out. About two-thirds of those seeking orthodontic treatment were females. Nearly 80% of the study sample had narrow palate followed by 15 and 5% of intermediate palate and broad palate, respectively. In regard to arch form, almost 90% of subjects were with tapered maxillary arch form and 10% of them with oval arch form. Males had increased dimensions compared to females, with significant differences, except in palatal depth in the molar area, and palatine height index, in which females showed increased dimensions than males but the differences were statistically non-significant. A strong positive correlation was observed between arch form and canine depth. In regard to arch perimeter, a strong negative correlation was found with molar depth and a medium positive correlation with each of canine depth, palatal width, and palatal length.

Maxillary and mandibular dental arch forms in a Jordanian population with normal occlusion

Background Ethnic background has been claimed to affect arch form. The purpose of this study was to describe and elucidate the maxillary and mandibular arch forms in Jordanian population and to develop a classification method for these forms which could be employed to construct orthodontic archwires accordingly. Methods The sample was comprised of study casts of five hundred and twenty subjects (231 males and 289 females with a mean age of 15.4 ± 1.02 years). All subjects had permanent dentition with normal occlusion. A mathematical method associated with a polynomial function of 6th degree was employed to assess the dental arch forms. The resultant arch forms were classified into 5 groups for both the maxilla and mandible utilizing a computer software with special code designed for this study. Each group was subdivided into 3 subgroup sizes namely: small, medium, and large. Results Catenary arch form was found in 47% and 41.2% (p ˂ 0.01) of maxilla and mandible arch forms, respectively. Form 2 (which is halfway between ellipse and U-shaped arch form) was found in 27.7% and 26.7%. Medium size arch form was found in 55.4% of the maxillary and 65.6% of the mandibular arch forms. Conclusion Catenary arch form was the most prevalent arch form, followed by wide elliptical form. The other forms, which included tudor arch, tapered equilateral and quadrangular forms were less frequent. Regarding size, the medium size was the most prevalent among the studied samples.

ASSESSMENT OF MEAN DISTANCE BETWEEN CENTRAL INCISOR AND INCISIVE PAPILLA WITH RESPECT TO STANDARDIZED ARCH FORM IN DENTATE SUBJECTS

BACKGROUND & OBJECTIVE: Edentulous patients require accurate positioning of artificial maxillary anterior teeth in complete dentures to recover the esthetic and phonetic characteristics. This positioning is guided by measuring distance between central incisor (CI) and incisive papilla (IP) in dentate subjects which varies according to the ovoid, square and tapered maxillary arch forms. Objectives: 1- To determine the frequency of three different arch forms in dentate patients; 2- To assess the mean distance between central incisor and incisive papilla in each of the three maxillary arch forms. METHODOLOGY: 130 cases were selected by non-probability consecutive sampling, which included both genders and age range of 20-40 years. Impressions of maxillary arches were recorded and their casts photocopied. Arch form template was used to standardize the assessment of arch forms by best-fit method on the photocopies. The distance between mesio-incisal edge of CI and posterior border of IP was measured with digital verniercalipers (SparkFun,Colorado). RESULTS: Out of 130 subjects, 54 males and 76 females were present. The ovoid arch form was the most frequent form recorded at 67% (n=87) while the tapered arch was the least at 14% (n=18). The overall mean distance between central incisor (CI) and incisive papilla (IP) was 11.34mm (7.58mm - 16.45mm). The mean distance was the highest for ovoid arch form (11.58mm) and lowest for square (10.49) with a statistically significant difference (p=0.016) between the two arch forms. CONCLUSION: The ovoid arch was the most frequent arch form found in dentate subjects. The mean distance recorded was highest for ovoid arch followed by tapering arch and least for square arches.

3D printed concrete components and structures: an overview

This paper aims to present an overview and explore components or structures suitable for 3D printed concrete. Most traditional structural forms are not well suitable for 3D printed concrete. To be more specific, it cannot fully consider the characteristics and advantages of 3D printing such as individualization and digitalization. Several 3D-printing-specific structure forms (including hollow form, tree form, arch form, and structure-functional form) are classified and the relevant successful cases are demonstrated. Moreover, the application potential of 3D printed concrete structures is illustrated and the limitations as well as the solutions for the application of 3D printed concrete in practical projects are also summarized. Based on the classification of different reinforcement materials, several reinforcement methods are intensively discussed for 3D printed concrete including steel bars, fibers and other reinforcement materials. The comparison of economic and environmental benefits between 3D concrete printing technology and traditional construction method is discussed respectively. Finally, the expected evolution of 3D printed structures is put forward and recommended.