Electronic regulation of Ni single atom by confined Ni nanoparticles for fast and energy-efficient CO2 electroreduction

Electrocatalytic CO2 to CO conversion is approaching the industrial benchmark. Currently, Au electrodes show the best performance, whereas non-precious metal catalysts exhibit inferior activity. Here we show a densely populated Ni single-atom on nanoparticle catalyst (NiSA/NP) via direct solid-sate pyrolysis, where Ni nanoparticles donate electrons to Ni(i)-N-C sites via carbon nanotubes network, achieves a high CO current of 352 mA cm−2 at -0.55 V vs RHE in an alkaline flow cell. When coupled with a NiFe-based oxygen evolution anode into a zero-gap membrane electrolyser, it delivers an industrial-relevant CO current of 310 mA cm−2 at a low cell voltage of -2.3 V, corresponding to an overall energy efficiency of 57%. The superior CO2 electroreduction performance is attributed to the enhanced adsorption of key intermediate COOH* on electron-rich Ni single atom, together with the dense active sites.

Electronic regulation of Ni single atom by confined Ni nanoparticles for fast and energy-efficient CO2 electroreduction

Electrocatalytic CO2 to CO conversion is approaching the industrial benchmark. Currently, Au electrodes show the best performance, whereas non-precious metal catalysts exhibit inferior activity. Here we show a densely populated Ni single-atom on nanoparticle catalyst (NiSA/NP) via direct solid-sate pyrolysis, where Ni nanoparticles donate electrons to Ni(i)-N-C sites via carbon nanotubes network, achieves a high CO current of 352 mA cm− 2 at -0.55 V vs RHE in an alkaline flow cell. When coupled with a NiFe-based oxygen evolution anode into a zero-gap membrane electrolyser, it delivers an industrial-relevant CO current of 310 mA cm− 2 at a low cell voltage of -2.3 V, corresponding to an overall energy efficiency of 57%. The superior CO2 electroreduction performance is attributed to the enhanced adsorption of key intermediate COOH* on electron-rich Ni single atom, together with the dense active sites.

New Aspects on the Direct Solid State Polycondensation (DSSP) of Aliphatic Nylon Salts: The Case of Hexamethylene Diammonium Dodecanoate

The direct solid state polymerization (DSSP) of hexamethylene diammonium dodecanoate (PA 612 salt) was investigated for two different salt grades, fossil-based and bio-based. Aliphatic polyamide salts (such as PA 612 salt) are highly susceptible to solid melt transition (SMT) phenomena, which restrain the industrial application of DSSP. To that end, emphasis was given on reactor design, being the critical parameter influencing byproduct diffusion, amine loss and inherent DSSP kinetics. Experiments took place both at the microscale and the laboratory scale, in which two different reactors were tested in terms of bypassing SMT phenomena. The new reactor designed here proved quite successful in maintaining the solid state during the reaction. Scouting experiments were conducted in order to assess the effect of critical parameters and determine appropriate reaction conditions. Fossil-based PA 612 products proved to have a better end-group imbalance in comparison to bio-based ones, which is critical in terms of achieving high molecular weight. Finally, a real DSSP process was demonstrated, starting from PA 612 salt crystals and ending with PA 612 particles.

Analysis of production, consumption and environmental burden of plastic industry in Vietnam by input-output table

The plastic industry is an economic sector that plays an important role in promoting a circular economy in Vietnam. This study used the updated 2018 input-output (IO) table to identify and analyse the production and consumption of seven different plastics including: HDPE, PS, PE, PET, PVC, PP, and others. The study also integrated the IO model to unveil the environmental burden of these plastics through the plastic demand of 40 economic sectors and households. As a result, in 2018, the amount of direct solid waste from the plastic industry was 58,147 tons and the amount of indirect solid waste from the plastic industry to other economic sectors and the household sector were 214,258 tons and 6,262 tons, respectively. Agriculture and its services, food processing, fashion manufacturing, basic chemical production, electrical and electronic equipment production, and transport production embodied the highest indirect burdens due to their use of plastic products. This study contributes to MFA research and developing strategies for sustainable production and consumption of plastics and the management of plastic waste in Vietnam.