Smart Sensing for Antibiotic Monitoring in Mineral and Surface Water: Development of an Electronic Tongue Device

Sensors are considered the future monitoring tools, since, compared to traditional sampling and analysis techniques, they provide fast response on the output data in a timely, continuous, safe, and cost-effective fashion. Antibiotics are important pharmaceuticals with a large variety of applications. However, the overconsumption of these drugs is under the spotlight, since traces of antibiotics are being found in aquatic ecosystems and may lead to the development of antibiotic resistance. Thus, in this work, sensors consisting of ceramic or glass BK7 solid supports with interdigitated gold electrodes coated with five bilayers of polyethyleneimine (PEI) and poly(sodium 4-styrenesulfonate) (PSS) thin films were developed and able to distinguish clarithromycin concentrations between 10−15 M and 10−5 M in mineral and surface water matrices. In mineral water, the ceramic support sensors have shown high reproducibility, whereas glass support sensors are not reproducible for this matrix. For the surface water matrix, both types of sensors proved to be reproducible. The surface water’s principal component analysis, obtained for an electronic tongue composed of the aforementioned sensors, demonstrated the concept’s ability to discriminate between different concentrations of the target compound, although no significant pattern of trend was achieved.

Ferroelectric Particles in Nematic Liquid Crystals with Soft Anchoring

A theoretical evaluation of the electric Freedericksz transition threshold and saturation field is proposed for a liquid crystals composite with ferroelectric particles. Existing models consider a strong anchoring of nematic molecules on the glass support of the cell, but in this paper a soft molecular anchoring of molecules on the glass support and also on the ferroelectric nanoparticle’s surface is assumed. Thus, a finite saturation field was obtained in agreement with real systems. Calculations are made for planar configuration of positive dielectric anisotropy liquid crystals. The results are compared with data obtained on similar systems from different publications and the differences are discussed.

Restaurarea unei piese de podoaba capului din patrimoniul Muzeului Etnografic al Transilvaniei

The workpiece approached in this paper is part of the category of port textiles (head adornment), with the purpose of emphasizing the social and economic status, but it also has a decorative role. The bonnet comes from the Odorheiul Secuiesc area and can be dated between 1880-1910. When the bonnet first entered the restoration laboratory it was investigated and the following degradations were found: functional wear, dust and dirt deposits, aging and brittleness of the fabric thread, dehydration and stiffening of the embroidery thread, stains of unknown origin, not very visible, improper interventions. The restoration work started with the dry mechanical cleaning of the workpiece, which was performed using the Minivacuum cleaner. Before the wet cleaning operation, the ribbons, bottoms and all the decorative elements of the piece, paper flowers, were disassembled, each component being cleaned and consolidated independently. The drying was controlled, the silk ribbons were dried on a glass support, and for the rest of the workpiece was made a drying support, which imitates the shape of the head. Together with the museologist, it was decided to coat the entire piece with transparent material (creplină) for the exterior, and a cotton cloth was used for the interior.

Influence of nanopillar arrays on fibroblast motility, adhesion and migration mechanisms

Surfaces decorated with high aspect ratio nanostructures are a promising tool to study cellular processes and design novel devices to control cellular behaviour, perform intracellular sensing or deliver effector molecules to cells in culture. However, little is known about the dynamics of cellular phenomenon such as adhesion, spreading and migration on such surfaces. In particular, how these are influenced by the surface properties. In this work, we investigate fibroblast behaviour on regular arrays of 1 micrometer high, polymer nanopillars with varying pillar to pillar distance (array pitch). NIH-3T3 fibroblasts spread on all arrays, and on contact with the substrate engulf nanopillars independently of the array pitch. As the cells start to spread, different behaviour is observed. On dense arrays which have the pitch equal or below 1 micrometer, cells are suspended on top of the nanopillars, making only sporadic contact with the glass support. Cells stay attached to the glass support and fully engulf nanopillars during spreading and migration on the sparse arrays which are characterized by a pitch of 2 micrometers and above. These alternate states have a profound effect on cell migration rates, which are strongly reduced on nanopillar sparse arrays. Dynamic actin puncta colocalize with nanopillars during cell spreading and migration. Strong membrane association with engulfed nanopillars might explain the reduced migration rates on sparse arrays. This work reveals several interesting phenomenon of dynamical cell behaviour on nanopillar arrays, and provides important perspectives on design and applications of high aspect ratio nanostructures.

Polyextremophilic Bacteria from High Altitude Andean Lakes: Arsenic Resistance Profiles and Biofilm Production

High levels of arsenic present in the High Altitude Andean Lakes (HAALs) ecosystems selected arsenic-resistant microbial communities which are of novel interest to study adaptations mechanisms potentially useful in bioremediation processes. We herein performed a detailed characterization of the arsenic tolerance profiles and the biofilm production of two HAAL polyextremophiles, Acinetobacter sp. Ver3 (Ver3) and Exiguobacterium sp. S17 (S17). Cellular adherence over glass and polypropylene surfaces were evaluated together with the effect of increasing doses and oxidative states of arsenic over the quality and quantity of their biofilm production. The arsenic tolerance outcomes showed that HAAL strains could tolerate higher arsenic concentrations than phylogenetic related strains belonging to the German collection of microorganisms and cell cultures (Deutsche Sammlung von Mikroorganismen und Zellkulturen, DSMZ), which suggest adaptations of HAAL strains to their original environment. On the other hand, the crystal violet method (CV) and SEM analysis showed that Ver3 and S17 were able to attach to solid surfaces and to form the biofilm. The quantification of biofilms production in 48 hours’ cultures through CV shows that Ver3 yielded higher production in the treatment without arsenic cultured on a glass support, while S17 yield higher biofilm production under intermediate arsenic concentration on glass supports. Polypropylene supports had negative effects on the biofilm production of Ver3 and S17. SEM analysis shows that the highest biofilm yields could be associated with a larger number of attached cells as well as the development of more complex 3D multicellular structures.

Wettability of DPPC Monolayers Deposited from the Titanium Dioxide–Chitosan–Hyaluronic Acid Subphases on Glass

The investigations were carried out to determine wettability of the 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayers transferred from the liquid subphases containing chitosan (Ch), hyaluronic acid (HA), and/or titanium dioxide (TiO2) to a glass support by means of the Langmuir–Blodgett (LB) technique. For comparative purposes, the analysis of the plates surfaces emerged from the analogous subphases without the phospholipid film was also made. Characterization of the DPPC monolayers was based on the contact angle measurements using three test liquids (water, formamide, diiodomethane) and a simulated body fluid (SBF) solution in which the concentration of ions was close to that of human plasma. After deposition of the DPPC monolayers on the glass plates, a significant increase in the contact angles of all the probe liquids was observed compared to the plates pulled out from the given subphase without floating DPPC. The presence of phospholipid monolayer increased the hydrophobic character of the surface due to orientation of its molecules with hydrocarbon chains towards the air. In addition, the components of the subphase attached along with DPPC to the glass support modify the surface polarity. The largest changes were observed in the presence of TiO2.