Measurement of Water Activity, Moisture Sorption Isotherms, and Moisture Content of Foods

2008 ◽  
pp. 155-171 ◽  
Author(s):  
Anthony J. Fontana
2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Tochukwu Samuel ◽  
J. Obeta Ugwuanyi

Garri is a creamy white or yellow starchy grit produced by roasting to gelatinization and dryness of peeled, washed, mashed, and fermented dewatered cassava roots. It is the most important product of cassava in West and Central Africa. Mean moisture content of yellow and white garri was 11.11% and 10.81% within 24 hrs of sampling from the market, increasing to 17.27% and 16.14%, respectively, following 3 months of storage at room temperature. The water activity of samples varied from initial 0.587 to 0.934 following storage. Moisture sorption isotherms, determined by static gravimetric techniques at 20° and 30°C, showed temperature dependent BET Sigmoidal type II behaviour typical of carbohydrate rich foods but modulated very slightly by the content of palm oil. Equilibrium moisture content decreased with increase in temperature at constant water activity. A total of 10 fungal species belonging to the generaMucor,Penicillium,Cephalosporium,Aspergillus,Scopulariopsis,Rhizopus, and Paecilomyceswere identified, with range increasing with water activity of samples.


Author(s):  
Zhao Yang ◽  
Enlong Zhu ◽  
Zongsheng Zhu

Abstract Moisture sorption isotherms of green soybean seeds were determined by static gravimetric method and water activity ranging from 0.11to 0.94 at 20, 30 and 40°C. The optimal sorption model of green soybean was determined by using nonlinear regression method. Modified BET multilayer sorption theory model parameters at different temperatures were calculated, isosteric sorption heat was derived by the water activity sorption isosteric model. Results indicated that sorption isotherms were belong to type III behaviour, a notable hysteresis effect was observed, Green soybean monolayer saturated sorption capacity was greater in desorption process than that of adsorption. The monolayer saturated sorption capacity decreased with increasing temperature, while the number of multilayer had a reverse trend with the monolayer saturated sorption capacity, the optimal sorption isotherm model for green soybean is Halsey model, The thermodynamic parameters including net isosteric heat of adsorption and desorption calculated at 40°C were 105.2-1865.4 kJ/kg and 111.62-1939.0 kJ/kg with equilibrium moisture content between 5% and 32% (d.b.), respectively. The net isosteric heat of sorption decreased with increasing equilibrium moisture content.


2006 ◽  
Vol 12 (6) ◽  
pp. 459-465 ◽  
Author(s):  
U. Siripatrawan ◽  
P. Jantawat

Moisture sorption isotherms of Thai Jasmine rice crackers were determined at 30, 45 and 60°C over a water activity range of 0.10 to 0.95 using a static gravimetric technique. Moisture sorption isotherms of rice crackers exhibited the sigmoid (Type II) shape. The moisture content of rice crackers decreased as temperature increased at a given water activity of the storage environment. The Brunauer, Emmett and Teller (BET) and Guggenheim-Anderson-de Boer (GAB) models were applied to fit the experimental data. The isosteric heat of sorption at different moisture levels was also determined using the Clausius–Clapeyron thermodynamic equation. A nonlinear regression analysis method was determined to evaluate the parameters of sorption equations. The criteria used to evaluate the goodness of fit of each model were the mean relative percentage deviation modulus (E) and the percentage root mean square error (RMSE). The more extended range of application of the GAB equation over the BET equation was evident. The GAB model gave the best fit to the experimental sorption data for a wide range of water activity (0.10–0.95) while the BET model gave the best fit for a water activity range of less than 0.60. The GAB model is considered suitable to predict the moisture sorption isotherm of rice crackers since it gave low E and RMSE values. The heat of sorption values of rice crackers were found to be large at low moisture content and decreased with an increase in food moisture content.


2014 ◽  
Vol 1033-1034 ◽  
pp. 681-689
Author(s):  
Zhong Yang Ren ◽  
Yan Yan Wu ◽  
Zhen Hua Duan ◽  
Lai Hao Li ◽  
Xian Qing Yang

The moisture sorption characteristics of salted largehead hairtail (Trichiurus lepturus) were investigated within the limits of water activity (0.11-0.98) at 25 and 35°C using a self-made instrument for the measurement of the equilibrium moisture content according to the static gravimetric method. The shape of the sorption isotherms was sigmoidal. The moisture sorption isotherms exhibited significant hysteresis. The hysteresis of salted fish may be due to the salt permeating into the body of the fish as a result of desorption and adsorption processes. Seventeen mathematical models were fit to the experimental data for the equilibrium moisture content at different water activity levels. The Ferro-Fontan equation provided the best fit for the experimental data of the equilibrium moisture content among the 17 models assessed for the sorption isotherms at 25 and 35°C. The net isosteric heats of sorption decreased gradually with increases in moisture content. The isosteric heats of sorption ranged from 44.59 kJ/mol to 45.61 kJ/mol between the moisture contents of 22.22% and 43.25% for salted largehead hairtail.


2020 ◽  
Vol 21 (4) ◽  
pp. 11-20
Author(s):  
Maha Muhyi Alhussaini ◽  
Hassanain A. Hassan ◽  
Nada S. Ahmedzeki

   The moisture sorption isotherms of Mefenamic acid tablets were investigated by measuring the experimental equilibrium moisture content (EMC) using the static method of saturated salt solutions at three temperatures (25, 35, and 45°C) and water activity range from 0.056 to 0.8434. The results showed that EMC increased when relative humidity increased and the sorption capacity decreased, the tablets became less hygroscopic and more stable when the temperature increased at constant water activity. The sorption curves had a sigmoid shape, type II according to Brunauer’s classification. The hysteresis effect was significant along with the whole sorption process. The results were fitted to three models: Oswin, Smith, and Guggenhein - Anderson and de Boer. According to the fitting results, the GAB model was the most appropriate model to describe the sorption behavior of Mefenamic acid; it had a regression coefficient range (0.9803-0.994), %E (0.69-4.06), and low values of SEE (0.85-2.2). The monolayer moisture content was calculated using the GAB model and it was concluded that the tablets should be stored at moisture content equal or slightly higher than (0.2046, 0.1843, and 0.1437 %) for desorption and (0.2073, 0.1269, and 0.1452 %) for adsorption for the three temperatures.


Author(s):  
Mario Luna-Flores ◽  
Mariana Gisela Peña-Juarez ◽  
Angélica Mara Bello-Ramirez ◽  
Javier Telis-Romero ◽  
Guadalupe Luna-Solano

Moisture sorption isotherms of the habanero pepper powder were determined using the Dynamic Vapor Sorption (DVS) method at 20, 25, 35, 45 and 55 °C in a range of water activity from 0.10 to 0.90 at which the processes of drying, packing and storage of habanero pepper are developed. The sorption capacity decreased with increasing temperature at a given water activity and the sorption isotherms showed a sigmoid form (Type II). The hysteresis phenomenon was observed in the sorption isotherms at all temperatures studied and it was more pronounced at temperatures high. The experimental sorption curves were fitting to the GAB, BET and Oswin models. It was concluded that the models that best describe the adsorption and desorption data for habanero pepper dehydrated powder were the GAB and Oswin models.  The isosteric heat of water sorption was calculated with the moisture content data in equilibrium. The desorption isotherms present a higher isosteric heat in relation to the adsorption isotherms. In both, the isosteric heat decreased as the moisture content increased. Keywords: Habanero pepper dehydrated powder; Convective drying; Moisture sorption isotherms; Mathematic models


Author(s):  
André L. D. Goneli ◽  
Paulo C. Corrêa ◽  
Gabriel H. H. de Oliveira ◽  
Osvaldo Resende ◽  
Munir Mauad

ABSTRACT Sorption isotherms are of great importance in post-harvest procedures, especially for predicting drying and storage, which help to establish the final moisture content of the product under certain environmental condition. Hysteresis is a phenomenon that occurs due to the difference between adsorption and desorption curves, which aids the evaluation of chemical and microbiological deteriorations, indicating the stability of stored products. Moisture sorption isotherms of castor beans were determined and hysteresis was analyzed. Static gravimetric technique at different temperatures (25, 35, 45 and 55 ± 1 °C) was used. Saturated salt solutions in the range of 37-87% ± 2% were utilized to create the required controlled relative humidity environment. Equilibrium moisture content data were correlated by different mathematical models and the Modified Halsey model presented good adjustment for the data, according to statistical procedures. Hysteresis between adsorption and desorption isotherms is present over the range of 0.2-0.9 of water activity, regardless of the temperature. This phenomenon decreases with temperature increase.


Author(s):  
Olusegun J Oyelade

Insights into the relationship between the air relative humidity (water activity (aw)) and equilibrium moisture content of food materials is essential to maintain good keeping quality and optimize process operation. The adsorption isotherms for cassava flour (lafun) were investigated with the static gravimetric method. Concentrated acid (H2SO4) solutions were used to vary the micro-climate in the study and presented in an easy-to-use template-like format over the range of temperature (27- 40oC) and aw (0.10-0.80) usually experienced in the tropical environment. The experimental data were compared with five widely recommended models in the literature for food sorption isotherms (GAB, modified GAB, modified Oswin, modified Henderson & modified Chung-Pfost). The moisture sorption isotherms were sigmoidal in shape and were influenced by temperature. The modified Oswin model was found to be most adequate whilst the modified GAB appears not suitable to model the adsorption isotherms for lafun.


Author(s):  
Jitka Langová ◽  
Donludee Jaisut ◽  
Ratiya Thuwapanichayanan ◽  
Charotorn Phowong ◽  
Jiří Štencl ◽  
...  

Water sorption tests of Roselle (Hibiscus sabdariffa L.) carried out under laboratory conditions are presented together with mathematical analyses of the moisture sorption isotherms (MSI’s). Moisture equilibrium data for adsorption and desorption of water from Roselle powder were investigated at near ambient air temperatures in the range of 5 and 35 °C and water activity (Aw) ranging from 0.11 to 0.97. The manometric method has been used for water sorption tests. Models for MSI’s are exponential equations. Coefficients of determination are 0.998 and 0.996 (for adsorption and desorption at 5 °C, respectively), 0.998 and 0.999 (for adsorption and desorption at 20 °C, respectively), and 0.998 and 0.999 (for adsorption and desorption at 35 °C, respectively). The equilibrium moisture content (EMC) of Roselle samples increased with an increase of Aw at a constant temperature both for adsorption and desorption. Adsorption curve equates to desorption curve at higher temperatures of tests carried out. Critical values of EMC of samples tested corresponding to the Aw equal to 0.6 were between 13.401% moisture content wet basis (MC w.b.) and 15.934% MC (w.b.) for moisture adsorption and desorption, respectively. These values are useful for storing conditions optimisation from point of view microorganisms grow and structural changes analyses. Crystal structure changes were observed during adsorption and desorption in the microscope, too. It was found out glass transition in dependence on the water content of samples tested.


Sign in / Sign up

Export Citation Format

Share Document