scholarly journals Strain Rate Sensitive Deformation Behavior under Tension and Compression of Al 0.3 CrFeCoNiMo 0.2

2021 ◽  
Author(s):  
Lisa-Marie Rymer ◽  
Philipp Frint ◽  
Thomas Lindner ◽  
Georg Gebel ◽  
Martin Löbel ◽  
...  
Keyword(s):  
Strain Rate ◽  
Deformation Behavior ◽  
Tension And Compression

scholarly journals Influence of Tungsten Alloying Additions on the Mechanical Properties and Texture of Tantalum

1993 ◽  
Vol 322 ◽  
Author(s):  
G.T. Gray ◽  
S.R. Bingert ◽  
S.I. Wright ◽  
S.R. Chen
Keyword(s):  
Strain Rate ◽  
Deformation Behavior ◽  
Mechanical Response ◽  
Loading Path ◽  
Systematic Effect ◽  
Alloying Additions ◽  
Strain Behavior ◽  
Bcc Metals ◽  
Work Hardening Rate ◽  
Tension And Compression

AbstractTantalum, like all bcc metals, exhibits deformation behavior which is substantially influenced by alloying, temperature, and strain rate. Recently, the mechanical response, in particular the highstrain- rate response, of tantalum and tantalum alloys has received increased interest for ballistic applications. In this paper, recent results on the influence of tungsten alloying additions on the mechanical response and starting crystallographic texture of tantalum-tungsten alloys are presented. The stress-strain behavior of three tantalum alloys containing 2.5, 5, and 10 wt.% W has been investigated as a function of loading path, tension and compression, and strain rate, 10−3 to 8000 s−l The yield strength and work-hardening rate were found to increase with increasing tungsten alloying content compared to unalloyed-Ta. Based on measurements of the surface and centerline textures of the Ta-W alloys, no systematic effect of tungsten content on texture was documented. However, due to variations in mechanical behavior between through-thickness and in-plane properties the need for complete through-thickness texture measurements is indicated.

Strain-Rate Dependent Deformation Behavior in WC-10 wt%Ni 3Al Cermet Micropillars Under Uniaxial Compression

2019 ◽  
Author(s):  
Minai Zhang ◽  
Xin Wang ◽  
Alexander D. Dupuy ◽  
Julie M. Schoenung ◽  
Xiaoqiang Li
Keyword(s):  
Strain Rate ◽  
Uniaxial Compression ◽  
Deformation Behavior ◽  
Rate Dependent

Study on Constitutive Modeling for Large Deformation Behavior of Polyethylene Considering Strain Rate Effect

2013 ◽  
Author(s):  
Sijia Zhong ◽  
Jianfeng Shi ◽  
Jinyang Zheng
Keyword(s):  
Strain Rate ◽  
Large Deformation ◽  
Constitutive Modeling ◽  
Deformation Behavior ◽  
True Strain ◽  
True Stress ◽  
Uniaxial Tensile ◽  
Pipeline System ◽  
Composite Effect ◽  
Time Deformation

Polyethylene (PE) pipes have been applied in transportation of key energy medium such as natural gas in the past decades. The mechanical property of PE is of great importance for better design and safer application of PE pipeline system. The large deformation behavior is a key character of PE, not only for its significant strain rate sensitivity, but also for localized necking process after yielding. In this paper, a new constitutive modeling method was proposed to charaterize the rate-denpendent large deformation behavior of PE, in which the true stress is regarded as a function of true stain and true strain rate alone. Uniaxial tensile tests of PE were conducted under various cross-head speeds, and a digital camera was used to record the real-time deformation of specimens. By separating the composite effect into respective effect of local true strain and strain rate on the local true stress in the necking region, a phenomenological model for describing the rate-dependent deformation behavior under uniaxial tension was ealstablished. Model results were validated and found in good agreement with experimental data.

scholarly journals Comparison in Deformation Behavior, Microstructure, and Failure Mechanism of Nickel Base Alloy 625 under Two Strain Rates

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2652
Author(s):  
Meng Liu ◽  
Quanyi Wang ◽  
Yifan Cai ◽  
Dong Lu ◽  
Tianjian Wang ◽  
...  
Keyword(s):  
Strain Rate ◽  
Deformation Behavior ◽  
Tensile Deformation ◽  
Base Alloy ◽  
Inconel 625 ◽  
Tensile Fracture ◽  
Nickel Base Superalloy ◽  
Strain Rates ◽  
Tensile Fracture Surface ◽  
Nickel Base

Tensile deformation behavior and microstructure of nickel-base superalloy Inconel 625 are investigated under different strain rates of 5 × 10−4 s−1 and 5 × 10−5 s−1. According to the experimental results, yield strength and ultimate tensile strength of the alloy increase with the increase in strain rate in room temperature. Microstructure results indicate that the size of dimples is smaller in the tensile fracture surface at low strain rate than the high strain rate, and the number of dimples is also related to the strain rates and twins appear earlier in the specimens with higher strain rates. Apart from Hollomon and Ludwik functions, a new formula considering the variation trend of strength in different deformation stages is deduced and introduced, which fit closer to the tensile curves of the 625 alloy used in the present work at both strain rates. Furthermore, the Schmid factors of tensile samples under two strain rates are calculated and discussed. In the end, typical work hardening behavior resulting from the dislocations slip behavior under different strain rates is observed, and a shearing phenomenon of slip lines cross through the δ precipitates due to the movement of dislocations is also be note.

The effect of strain rates on tensile deformation of ultrafine-grained copper

2017 ◽  
Vol 31 (16-19) ◽  
pp. 1744014
Author(s):  
M. Li ◽  
Q. W. Jiang
Keyword(s):  
Strain Rate ◽  
Deformation Behavior ◽  
Room Temperature ◽  
Tensile Deformation ◽  
Strain Rates ◽  
Roll Bonding ◽  
Fracture Elongation ◽  
Tensile Deformation Behavior ◽  
Ultrafine Grained ◽  
Flow Stress Level

Tensile deformation behavior of ultrafine-grained (UFG) copper processed by accumulative roll-bonding (ARB) was studied under different strain rates at room temperature. It was found that the UFG copper under the strain rate of 10[Formula: see text] s[Formula: see text] led to a higher strength (higher flow stress level), flow stability (higher stress hardening rate) and fracture elongation. In the fracture surface of the sample appeared a large number of cleavage steps under the strain rate of 10[Formula: see text] s[Formula: see text], indicating a typical brittle fracture mode. When the strain rate is 10[Formula: see text] or 10[Formula: see text] s[Formula: see text], a great amount of dimples with few cleavage steps were observed, showing a transition from brittle to plastic deformation with increasing strain rate.

Influence of strain rate and temperature on the deformation behavior of a metastable high carbon iron-nickel austenite

1985 ◽  
Vol 16 (3) ◽  
pp. 445-452 ◽  
Author(s):  
Anil K. Sachdev ◽  
Michael M. Shea
Keyword(s):  
Strain Rate ◽  
Deformation Behavior ◽  
High Carbon ◽  
Iron Nickel ◽  
Carbon Iron

Dynamic Deformation Behavior of As-Extruded Mg-Gd-Y Magnesium Alloy and the Microstructural Evolution

2011 ◽  
Vol 284-286 ◽  
pp. 1579-1583
Author(s):  
Ping Li Mao ◽  
Zheng Liu ◽  
Chang Yi Wang ◽  
Feng Wang
Keyword(s):  
Magnesium Alloy ◽  
Strain Rate ◽  
Deformation Behavior ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Deformation ◽  
Strain Rates ◽  
Compression Axis ◽  
Deformation Localization ◽  
Dynamic Deformation Behavior

The dynamic deformation behavior of an as-extruded Mg-Gd-Y magnesium alloy was studied by using Split Hopkinson Pressure Bar (SHPB) apparatus under high strain rates of 102 s-1 to 103s-1 in the present work, in the mean while the microstructure evolution after deformation were inspected by OM and SEM. The results demonstrated that the material is not sensitive to the strain rate and with increasing the strain rate the yield stress of as-extruded Mg-Gd-Y magnesium alloy has a tendency of increasing. The microstructure observation results shown that several deformation localization areas with the width of 10mm formed in the strain rates of 465s-1 and 2140s-1 along the compression axis respectively, and the grain boundaries within the deformation localization area are parallel with each other and are perpendicular to the compression axis. While increasing the strain rate to 3767s-1 the deformation seems become uniform and all the grains are compressed flat in somewhat. The deformation mechanism of as-extruded Mg-Gd-Y magnesium alloy under high strain rate at room temperature was also discussed.

High Temperature Deformation Mechanism Maps of NiAl

2004 ◽  
Vol 449-452 ◽  
pp. 57-60
Author(s):  
I.G. Lee ◽  
A.K. Ghosh
Keyword(s):  
High Temperature ◽  
Strain Rate ◽  
Deformation Mechanism ◽  
Calculation Method ◽  
Deformation Behavior ◽  
Tensile Tests ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Grain Sizes ◽  
Temperature Strain

In order to analyze high temperature deformation behavior of NiAl alloys, deformation maps were constructed for stoichiometric NiAl materials with grain sizes of 4 and 200 µm. Relevant constitute equations and calculation method will be described in this paper. These maps are particularly useful in identifying the location of testing domains, such as creep and tensile tests, in relation to the stress-temperature-strain rate domains experienced by NiAl.

Tension and Compression Behavior of Pre-Stressed Steel Strands at High Strain Rate

2011 ◽  
Vol 82 ◽  
pp. 154-159 ◽  
Author(s):  
Anatoly M. Bragov ◽  
Ezio Cadoni ◽  
Alexandr Yu. Konstantinov ◽  
Andrey K. Lomunov
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
High Strength ◽  
Gauge Length ◽  
Hopkinson Pressure Bar ◽  
Dog Bone ◽  
Tension And Compression ◽  
Set Up

In this paper is described the mechanical characterization at high strain rate of the high strength steel usually adopted for strands. The experimental set-up used for high strain rates testing: in tension and compression was the Split Hopkinson Pressure Bar installed in the Laboratory of Dynamic Investigation of Materials in Nizhny Novgorod. The high strain rate data in tension was obtained with dog-bone shaped specimens of 3mm in diameter and 5mm of gauge length. The specimens were screwed between incident and transmitter bars. The specimens used in compression was a cylinder of 3mm in diameter and 5mm in length. The enhancement of the mechanical properties is quite limited compared the usual reinforcing steels.

Effect of Grain Size on Deformation Twinning Behavior of Ti6Al4V Alloy

2015 ◽  
Vol 830-831 ◽  
pp. 337-340
Author(s):  
Ashish Kumar Saxena ◽  
Manikanta Anupoju ◽  
Asim Tewari ◽  
Prita Pant
Keyword(s):  
Plastic Deformation ◽  
Grain Size ◽  
Strain Rate ◽  
Deformation Behavior ◽  
Deformation Behaviour ◽  
Air Cooling ◽  
Specific Strength ◽  
Aerospace Applications ◽  
Β Phase ◽  
Plastic Deformation Behavior

An understanding of the plastic deformation behavior of Ti6Al4V (Ti64) is of great interest because it is used in aerospace applications due to its high specific strength. In addition, Ti alloys have limited slip systems due to hexagonal crystal structure; hence twinning plays an important role in plastic deformation. The present work focuses upon the grain size effect on plastic deformation behaviour of Ti64. Various microstructures with different grain size were developed via annealing of Ti64 alloy in α-β phase regime (825°C and 850°C) for 4 hours followed by air cooling. The deformation behavior of these samples was investigated at various deformation temperature and strain rate conditions. Detailed microstructure studies showed that (i) smaller grains undergoes twinning only at low temperature and high strain rate, (ii) large grain samples undergo twinning at all temperatures & strain rates, though the extent of twinning varied.

Sign in / Sign up

Export Citation Format

Share Document