Buckling Instability Control of 1D Nanowire Networks for a Large‐Area Stretchable and Transparent Electrode

2020 ◽  
Vol 30 (21) ◽  
pp. 1910214 ◽  
Author(s):  
Byoung Soo Kim ◽  
Hyowon Kwon ◽  
Hyun Jeong Kwon ◽  
Jun Beom Pyo ◽  
Jinwoo Oh ◽  
...  
2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Muhammad Naqi ◽  
Kyung Hwan Choi ◽  
Hocheon Yoo ◽  
Sudong Chae ◽  
Bum Jun Kim ◽  
...  

AbstractLow-temperature-processed semiconductors are an emerging need for next-generation scalable electronics, and these semiconductors need to feature large-area fabrication, solution processability, high electrical performance, and wide spectral optical absorption properties. Although various strategies of low-temperature-processed n-type semiconductors have been achieved, the development of high-performance p-type semiconductors at low temperature is still limited. Here, we report a unique low-temperature-processed method to synthesize tellurium nanowire networks (Te-nanonets) over a scalable area for the fabrication of high-performance large-area p-type field-effect transistors (FETs) with uniform and stable electrical and optical properties. Maximum mobility of 4.7 cm2/Vs, an on/off current ratio of 1 × 104, and a maximum transconductance of 2.18 µS are achieved. To further demonstrate the applicability of the proposed semiconductor, the electrical performance of a Te-nanonet-based transistor array of 42 devices is also measured, revealing stable and uniform results. Finally, to broaden the applicability of p-type Te-nanonet-based FETs, optical measurements are demonstrated over a wide spectral range, revealing an exceptionally uniform optical performance.


2017 ◽  
Vol 5 (26) ◽  
pp. 13320-13328 ◽  
Author(s):  
Arumugam Manikandan ◽  
Ling Lee ◽  
Yi-Chung Wang ◽  
Chia-Wei Chen ◽  
Yu-Ze Chen ◽  
...  

Copper nanowire networks (NWs) coated with a graphene layer through a carbon-enclosed chemical vapor deposition technique at a low temperature of 400 °C with a low sheet resistance of 23.2 Ω sq−1 and a high transmittance of 83.4%, which is comparable to typical values of tin-doped indium oxide (ITO), as a transparent conducting electrode were demonstrated.


RSC Advances ◽  
2020 ◽  
Vol 10 (17) ◽  
pp. 9940-9948
Author(s):  
Geon Hwee Kim ◽  
Hyeonsu Woo ◽  
Suhyeon Kim ◽  
Taechang An ◽  
Geunbae Lim

The flexible transparent electrode of this study used electrospinning and electroless deposition, which is a fabrication method to remove contact resistance at the nanofiber intersection and fabricate large-area electrode.


Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2185
Author(s):  
Soo Won Heo

In this study, we developed a method for fabricating ultrathin polymer substrates that can be used in ultra-flexible organic photovoltaics (OPVs) via a non-vacuum process using cyclic transparent optical polymer. In addition, a Ag nanowire network layer was used as a transparent electrode in a solution process. All processes were conducted on large area via spin coating. The power conversion efficiency (PCE) of the ultra-flexible OPV improved by 6.4% compared to the PCE of the ITO/Glass-based OPV. In addition, the PCE of the OPV increased to 10.12% after introducing nanostructures in the ZnO and photoactive layers. We performed 1000 cycles of compression/relaxation tests to evaluate the mechanical properties of the ultra-flexible OPV, after which, the PCE remained at 67% of the initial value. Therefore, the developed OPV system is suitable as a power source for portable devices.


2017 ◽  
Vol 8 ◽  
pp. 467-474 ◽  
Author(s):  
Gabriele Fisichella ◽  
Stella Lo Verso ◽  
Silvestra Di Marco ◽  
Vincenzo Vinciguerra ◽  
Emanuela Schilirò ◽  
...  

Graphene is an ideal candidate for next generation applications as a transparent electrode for electronics on plastic due to its flexibility and the conservation of electrical properties upon deformation. More importantly, its field-effect tunable carrier density, high mobility and saturation velocity make it an appealing choice as a channel material for field-effect transistors (FETs) for several potential applications. As an example, properly designed and scaled graphene FETs (Gr-FETs) can be used for flexible high frequency (RF) electronics or for high sensitivity chemical sensors. Miniaturized and flexible Gr-FET sensors would be highly advantageous for current sensors technology for in vivo and in situ applications. In this paper, we report a wafer-scale processing strategy to fabricate arrays of back-gated Gr-FETs on poly(ethylene naphthalate) (PEN) substrates. These devices present a large-area graphene channel fully exposed to the external environment, in order to be suitable for sensing applications, and the channel conductivity is efficiently modulated by a buried gate contact under a thin Al2O3 insulating film. In order to be compatible with the use of the PEN substrate, optimized deposition conditions of the Al2O3 film by plasma-enhanced atomic layer deposition (PE-ALD) at a low temperature (100 °C) have been developed without any relevant degradation of the final dielectric performance.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Qiang Li ◽  
Zhenhuan Tian ◽  
Yuantao Zhang ◽  
Zuming Wang ◽  
Yufeng Li ◽  
...  

2019 ◽  
Vol 27 (07) ◽  
pp. 1950171
Author(s):  
PING LIU ◽  
JIANGHAO WANG ◽  
JIE CHENG ◽  
LIMING LIU ◽  
HONGHANG WANG ◽  
...  

A flexible organic light-emitting device (OLED) was produced using copper nanowire (CuNW) film as anode and Graphene oxide (GO)/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) film as anode buffer layer. Compared with other transparent conductive films (TCFs), CuNWs are low cost, easy to fabricate, and compatible with flexible substrates over a large area. Due to these advantages, CuNWs are showing greater and greater promise for the next generation of TCF. Modified by PEDOT:PSS, the conductivity and work function of the CuNW film can be dramatically enhanced. However, PEDOT:PSS is highly acidic and easy to corrode the CuNW film, which will reduce maximum luminous brightness and current efficiency of the OLED. In this paper, GO/PEDOT:PSS was used as anode buffer layer to modify the CuNW anode and the composite transparent electrode exhibited excellent optoelectrical properties. The driving voltage of the OLED with CuNW/PEDOT:PSS is 6.2[Formula: see text]V, and the maximum luminous brightness is 2737.2[Formula: see text]cd/m2. The driving voltage of the OLED with CuNW/GO/PEDOT:PSS anode was reduced to 5.1[Formula: see text]V, and the maximum luminous brightness was improved to 3007.4[Formula: see text]cd/m2.


2016 ◽  
Vol 4 (34) ◽  
pp. 7948-7958 ◽  
Author(s):  
Janghoon Park ◽  
Jongsu Lee ◽  
Youngwook Noh ◽  
Kee-Hyun Shin ◽  
Dongjin Lee

Ultraviolet (UV) photodetectors containing flexible films were fabricated by a roll-to-roll processing method.


Sign in / Sign up

Export Citation Format

Share Document