scholarly journals Fine‐Tuning the Energy Levels of a Nonfullerene Small‐Molecule Acceptor to Achieve a High Short‐Circuit Current and a Power Conversion Efficiency over 12% in Organic Solar Cells

2017 ◽  
Vol 30 (3) ◽  
pp. 1704904 ◽  
Author(s):  
Bin Kan ◽  
Jiangbin Zhang ◽  
Feng Liu ◽  
Xiangjian Wan ◽  
Chenxi Li ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Small Molecule ◽  
Organic Solar Cells ◽  
Short Circuit ◽  
Energy Levels ◽  
Power Conversion ◽  
Short Circuit Current ◽  
Fine Tuning

Photovoltaic Characteristics of Hybrid MEH-PPV and TiO2 Nanoparticle Based Organic Solar Cells

2013 ◽  
Vol 667 ◽  
pp. 300-306 ◽  
Author(s):  
Fazlinashatul Suhaidah Zahid ◽  
Puteri Sarah Mohamad Saad ◽  
Mohamed Zahidi Musa ◽  
Mohamad Rusop Mahmood
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Tio2 Nanoparticles ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
Short Circuit ◽  
Power Conversion ◽  
Sol Gel ◽  
Short Circuit Current ◽  
Photovoltaic Properties

The photovoltaic properties of organic solar cells based on hybrid poly [2-methoxy-5-(2-ethylhexyloxy-p-phenylenevinylen) (MEH-PPV) and anatase titanium dioxide (TiO2) nanoparticles as a function of TiO2 concentration were investigated. Synthesis of TiO2 nanoparticles was performed by sol-gel immerses heated method and been used as a filler in MEH-PPV polymer matrix. The hybrid MEH-PPV: TiO2 solar cells exhibited increased in light absorption and power conversion efficiency than the pristine organic solar cell. By further optimizing the concentration of TiO2 nanoparticles, the short-circuit current of the hybrid MEH-PPV: TiO2 was reached up to 0.004823 (mA/cm2) and the corresponding power conversion efficiency was 0.000378% was obtained under Air Mass 1.5 illumination which was more than 80% higher compared to the device without TiO2 nanoparticles. This indicates by embedded TiO2 nanoparticles in MEH-PPV matrix encouraging the charge transportation in the active layer of organic solar cells device.

The Effect of Donor Molecular Structure on Power Conversion Efficiency of Small-Molecule-Based Organic Solar Cells

2019 ◽  
Vol 16 (3) ◽  
pp. 236-243 ◽  
Author(s):  
Hui Zhang ◽  
Yibing Ma ◽  
Youyi Sun ◽  
Jialei Liu ◽  
Yaqing Liu ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Small Molecule ◽  
Organic Solar Cells ◽  
Molecular Design ◽  
Power Conversion ◽  
The Relationship

In this review, small-molecule donors for application in organic solar cells reported in the last three years are highlighted. Especially, the effect of donor molecular structure on power conversion efficiency of organic solar cells is reported in detail. Furthermore, the mechanism is proposed and discussed for explaining the relationship between structure and power conversion efficiency. These results and discussions draw some rules for rational donor molecular design, which is very important for further improving the power conversion efficiency of organic solar cells based on the small-molecule donor.

scholarly journals High performance tandem organic solar cells via a strongly infrared-absorbing narrow bandgap acceptor

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Zhenrong Jia ◽  
Shucheng Qin ◽  
Lei Meng ◽  
Qing Ma ◽  
Indunil Angunawela ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
High Performance ◽  
Short Circuit ◽  
Power Conversion ◽  
High Power Conversion Efficiency ◽  
Device Structure ◽  
Narrow Bandgap

AbstractTandem organic solar cells are based on the device structure monolithically connecting two solar cells to broaden overall absorption spectrum and utilize the photon energy more efficiently. Herein, we demonstrate a simple strategy of inserting a double bond between the central core and end groups of the small molecule acceptor Y6 to extend its conjugation length and absorption range. As a result, a new narrow bandgap acceptor BTPV-4F was synthesized with an optical bandgap of 1.21 eV. The single-junction devices based on BTPV-4F as acceptor achieved a power conversion efficiency of over 13.4% with a high short-circuit current density of 28.9 mA cm−2. With adopting BTPV-4F as the rear cell acceptor material, the resulting tandem devices reached a high power conversion efficiency of over 16.4% with good photostability. The results indicate that BTPV-4F is an efficient infrared-absorbing narrow bandgap acceptor and has great potential to be applied into tandem organic solar cells.

Effect of temperature on organic Schottky barrier cells

1981 ◽  
Vol 59 (6) ◽  
pp. 727-732 ◽  
Author(s):  
Rafik O. Loutfy ◽  
Cheng-Kuo Hsiao
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Schottky Barrier ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
Short Circuit ◽  
Power Conversion ◽  
Open Circuit ◽  
Effect Of Temperature ◽  
Photovoltaic Properties

The effect of temperature on the photovoltaic properties of indium/metal-free phthalocyanine Schottky barrier solar cells was investigated in the range 260–350 K. In general, the short circuit photocurrent, Jsc, and fill factor, ff, increased with increasing temperature (in contrast to inorganic photocells). The device series resistance and open circuit photovoltage, Voc, decreased (similar to inorganic photocells) as temperature was raised. An increase in the overall power conversion efficiency, η, has been observed with increase of temperature. In the case of x-H2Pc, the power conversion efficiency increased by 2.5 times due to a temperature rise of 60 °C above ambient. Thus, for operation at temperatures above ambient, organic solar cells may offer a significant advantage over inorganic cells.Analysis of the variation of the photovoltage with temperature showed that the decrease in Voc is mainly due to variation injunction impedance, which is controlled by thermionic current at high temperature and ionized impurity at low temperature.

The effect of methyl ammonium chloride doping for perovskite solar cells on structure, crystallization and power conversion efficiency

2020 ◽  
pp. 2150096
Author(s):  
Jing Gao ◽  
Chujian Liao ◽  
Yanqun Guo ◽  
Difan Zhou ◽  
Zhigang Zeng ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Surface Defects ◽  
Short Circuit ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Short Circuit Current ◽  
High Quality ◽  
Perovskite Layer

The perovskite membrane with large particle size, uniform coverage and high quality is the prerequisite for the preparation of efficient and stable perovskite solar cells. Various additives have been used to increase the grain size and improve the film morphology and crystal quality. In this paper, methylammonium chloride (MACl) was proposed to obtain high crystalline quality of [Formula: see text] perovskite absorption layer. The results show that the adding ammonium methyl chloride into the precursor of tricationic perovskite not only passivates surface defects to form high-quality and large-grain perovskite films, but also facilitates the formation of pure [Formula: see text]-phase [Formula: see text]. Meanwhile, the designed perovskite precursor solutions were used to fabricate mesoporous perovskite solar cells (PSCs). Owing to the perovskite layer consisting of optimized MACl doping, the short-circuit current density [Formula: see text] of PSCs reaches 23.81 mA/cm2, which is 2.73 mA/cm2 higher than the primary [Formula: see text] based on PSCs. The obtained power conversion efficiency (PCE) increases from 13.67% to 17.59%.

Effect of Crystallinity on the Performance of P3HT/PC70BM/n-Dodecylthiol Polymer Solar Cells

2013 ◽  
Vol 136 (2) ◽  
Author(s):  
Nidal Abu-Zahra ◽  
Mahmoud Algazzar
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Polymer Solar Cells ◽  
Short Circuit ◽  
Power Conversion ◽  
Crystallization Rate ◽  
Short Circuit Current ◽  
Scanning Calorimetry ◽  
Avrami Model

In this research, n-dodecylthiol was added to P3HT/PC70BM polymer solar cells (PSCs) to improve the crystallinity of P3HT and enhance the phase separation of P3HT/PC70BM. Crystallinity of P3HT:PC70BM doped with 0–5% by volume of n-dodecylthiol was measured using X-ray diffraction (XRD) and differential scanning calorimetry (DSC) techniques. Both methods showed improvement in crystallinity, which resulted in improving the power conversion efficiency (PCE) of polymer solar cells by 33%. In addition, annealing at 150 °C for 30 min showed further improvement in crystallinity with n-dodecylthiol concentration up to 2%. The highest power conversion efficiency of 3.21% was achieved with polymer crystallites size L of 11.2 nm, after annealing at 150 °C for 30 min under a vacuum atmosphere. The smaller crystallite size suggests a shorter path of the charge carriers between P3HT backbones, which could be beneficial to getting a higher short circuit current in the devices made with the additive. Kinetics study of P3HT:PC70BM crystallinity using Avrami model showed a faster crystallization rate (1/t0.5) at higher temperatures.

Layer by layer solution processed organic solar cells based on a small molecule donor and a polymer acceptor

2015 ◽  
Vol 3 (2) ◽  
pp. 447-452 ◽  
Author(s):  
Yifan Wang ◽  
Xingang Zhao ◽  
Xiaowei Zhan
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Small Molecule ◽  
Organic Solar Cells ◽  
Power Conversion ◽  
Solution Process ◽  
Layer By Layer ◽  
Polymer Acceptor ◽  
Layer Solution

Inverted organic solar cells based on a small molecule donor and a polymer acceptor were fabricated using a layer by layer solution process, which exhibited a power conversion efficiency up to 1.12%.

17% efficiency all-small-molecule organic solar cells enabled by nanoscale phase separation with a hierarchical branched structure

2021 ◽  
Author(s):  
Jinzhao Qin ◽  
Zhihao Chen ◽  
Pengqing Bi ◽  
Yang Yang ◽  
Jianqi Zhang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Phase Separation ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Small Molecule ◽  
Organic Solar Cells ◽  
Power Conversion ◽  
Nanoscale Phase Separation ◽  
Branched Structure

By constructing a ternary cell with a B1:BO-2Cl:BO-4Cl donor:acceptors combination, an outstanding power conversion efficiency (PCE) of 17.0% (certified to be 16.9%) has been realized for all-small-molecule organic solar cells (ASM-OSCs).

Efficient, Thermally Stable Poly(3-Hexylthiophene)-Based Organic Solar Cells Achieved by Non-Covalently Fused-Ring Small Molecule Acceptors

2022 ◽  
Author(s):  
Daehee Han ◽  
Yunghee Han ◽  
Youngkwon Kim ◽  
Jin-Woo Lee ◽  
Dahyun Jeong ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Small Molecule ◽  
Organic Solar Cells ◽  
Power Conversion ◽  
Significant Enhancement ◽  
Thermally Stable ◽  
Fused Ring

Organic solar cells (OSCs) based on poly(3-hexylthiophene) (P3HT) have achieved a significant enhancement of the power conversion efficiency (PCE), mainly driven by the development of non-fullerene small-molecule acceptors. However, their...

Sign in / Sign up

Export Citation Format

Share Document