A Novel Soft‐Magnetic B2‐Based Multiprincipal‐Element Alloy with a Uniform Distribution of Coherent Body‐Centered‐Cubic Nanoprecipitates

2021 ◽  
Vol 33 (14) ◽  
pp. 2006723
Author(s):  
Yue Ma ◽  
Qing Wang ◽  
Xuyang Zhou ◽  
Jiamiao Hao ◽  
Baptiste Gault ◽  
...  
2003 ◽  
Vol 18 (5) ◽  
pp. 1035-1038 ◽  
Author(s):  
J. Gonzáz

Results on microstructure and coercivity of current-annealed Fe73.5Cu1Nb3Si13.5B9 amorphous alloy treated at different current densities (12–56 A/mm2) and duration (0.5–720 min) are presented. Saturation magnetization and coercivity dependencies with the current density of the nanocrystalline samples is explained by considering the presence of two phases: nanocrystals of Fe(Si) body-centered cubic (bcc) grains and the residual amorphous matrix. An increase in the magnetic hardness observed when the sample was heated by current densities, giving rise to an increase in the sample temperature above the Curie point of the residual amorphous matrix, could be ascribed to exchange and dipolar decoupling of the Fe(Si)-bcc grains.


Author(s):  
Robert C. Rau ◽  
Robert L. Ladd

Recent studies have shown the presence of voids in several face-centered cubic metals after neutron irradiation at elevated temperatures. These voids were found when the irradiation temperature was above 0.3 Tm where Tm is the absolute melting point, and were ascribed to the agglomeration of lattice vacancies resulting from fast neutron generated displacement cascades. The present paper reports the existence of similar voids in the body-centered cubic metals tungsten and molybdenum.


Author(s):  
June D. Kim

Iron-base alloys containing 8-11 wt.% Si, 4-8 wt.% Al, known as “Sendust” alloys, show excellent soft magnetic properties. These magnetic properties are strongly dependent on heat treatment conditions, especially on the quenching temperature following annealing. But little has been known about the microstructure and the Fe-Si-Al ternary phase diagram has not been established. In the present investigation, transmission electron microscopy (TEM) has been used to study the microstructure in a Sendust alloy as a function of temperature.An Fe-9.34 wt.% Si-5.34 wt.% Al (approximately Fe3Si0.6Al0.4) alloy was prepared by vacuum induction melting, and homogenized at 1,200°C for 5 hrs. Specimens were heat-treated in a vertical tube furnace in air, and the temperature was controlled to an accuracy of ±2°C. Thin foils for TEM observation were prepared by jet polishing using a mixture of perchloric acid 15% and acetic acid 85% at 10V and ∼13°C. Electron microscopy was performed using a Philips EM 301 microscope.


1998 ◽  
Vol 22 (4_1) ◽  
pp. 186-189
Author(s):  
M. Matsumoto ◽  
A. Morisako ◽  
Y. Mutoh

Author(s):  
Helena Borzenko ◽  
Tamara Panfilova ◽  
Mikhail Litvin

Purpose articles rassm and experience and benefits systems taxation countries European Union, manifestation iti the main limitations domestic taxlegislation and wired STI their comparisons. In general iti ways the provisiontax reporting countries Eurozone in the appropriate organs, dove STI need theintroduction Ukraine electronic methods receiving and processing such reports.define iti key directions reforming domestic tax legislation. Methodology research is to use aggregate methods: dialectical, statistical, historical, comparative. Scientific novelty is to are provided recommendations for improvement ofefficiency systems taxation of our states in international ratings characterizingtax institutions country. Therefore, despite some problems in legislation heldcomparative study systems taxation EU and Ukraine. Conclucions Coming fromof this, the main directions reforming tax systems Ukraine, in our opinion,today should become: improvement process administration, reduce scales evasiontaxes, provision more uniform distribution tax burden between taxpayers, themaximum cooperation tax bodies different levels as well adjustment systemselectronic interactions tax authorities and payers, tax system must contain ascan less unfounded benefits, consistent with the general by politics pricing.


2013 ◽  
Vol 133 (11) ◽  
pp. 1073-1081 ◽  
Author(s):  
Hirooki Tokoi ◽  
Kinya Kobayashi ◽  
Hideaki Nagashima ◽  
Shuichi Ishizawa ◽  
Yuji Enomoto

2019 ◽  
Vol 139 (10) ◽  
pp. 873-879 ◽  
Author(s):  
Tsuyoshi Nonaka ◽  
Shingo Zeze ◽  
Shogo Makino ◽  
Motomichi Ohto

Author(s):  
T. V. Oblakova

The paper is studying the justification of the Pearson criterion for checking the hypothesis on the uniform distribution of the general totality. If the distribution parameters are unknown, then estimates of the theoretical frequencies are used [1, 2, 3]. In this case the quantile of the chi-square distribution with the number of degrees of freedom, reduced by the number of parameters evaluated, is used to determine the upper threshold of the main hypothesis acceptance [7]. However, in the case of a uniform law, the application of Pearson's criterion does not extend to complex hypotheses, since the likelihood function does not allow differentiation with respect to parameters, which is used in the proof of the theorem mentioned [7, 10, 11].A statistical experiment is proposed in order to study the distribution of Pearson statistics for samples from a uniform law. The essence of the experiment is that at first a statistically significant number of one-type samples from a given uniform distribution is modeled, then for each sample Pearson statistics are calculated, and then the law of distribution of the totality of these statistics is studied. Modeling and processing of samples were performed in the Mathcad 15 package using the built-in random number generator and array processing facilities.In all the experiments carried out, the hypothesis that the Pearson statistics conform to the chi-square law was unambiguously accepted (confidence level 0.95). It is also statistically proved that the number of degrees of freedom in the case of a complex hypothesis need not be corrected. That is, the maximum likelihood estimates of the uniform law parameters implicitly used in calculating Pearson statistics do not affect the number of degrees of freedom, which is thus determined by the number of grouping intervals only.


Sign in / Sign up

Export Citation Format

Share Document