Effect of incomplete mixing on the analysis of the static behaviour of continuous cultures

1970 ◽  
Vol 12 (6) ◽  
pp. 1001-1017 ◽  
Author(s):  
C. G. Sinclair ◽  
D. E. Brown
Keyword(s):  
Continuous Cultures ◽  
Incomplete Mixing ◽  
Static Behaviour

Anaerobic Semi-Continuous Culture Biodegradation of Dichlorophenols Containing an Ortho Chlorine

1987 ◽  
Vol 22 (3) ◽  
pp. 427-436 ◽  
Author(s):  
S.E. Hrudey ◽  
E. Knettig ◽  
P.M. Fedorak ◽  
S.A. Daignault
Keyword(s):  
Activated Carbon ◽  
Continuous Culture ◽  
Chlorine Atom ◽  
Degradation Process ◽  
Anaerobic Sludge ◽  
Continuous Cultures ◽  
Complete Mineralization

Abstract Rapid and preferential dechlorination of the ortho chlorine from 2,6-, 2,4- and 2,3- dichlorophenol substrates was observed in semi-continuous cultures inoculated with 50% unacclimated anaerobic sludge. The rate of further dechlorination depended on the position of the second chlorine atom. The dechlorination rates for the second chlorine ranked ortho > para > meta. Complete mineralization to methane was only observed in cultures fed 2,6-dichlorophenol. Addition of activated carbon to the anaerobic cultures showed some benefit to the degradation process.

Experience with the Relay Procedure for Tuning Controllers in Automatic Control of Chlorination

1993 ◽  
Vol 28 (11-12) ◽  
pp. 257-261
Author(s):  
M. Truett Garrett ◽  
Zaki Ahmad ◽  
Shelly Young
Keyword(s):  
Wastewater Treatment ◽  
Automatic Control ◽  
Time Constant ◽  
Wastewater Treatment Plants ◽  
Relay Feedback ◽  
Quality Of Control ◽  
Incomplete Mixing ◽  
Long Time ◽  
Chlorine Demand

The recent requirements by U.S.E.P.A. for dechlorination and biomonitoring have increased the importance of automatic control of effluent chlorination in wastewater treatment plants. Difficulties with the Ziegler-Nichols controller tuning procedure were reported at the Kyoto Workshop, 1990. Problems are caused by the noise of incomplete mixing, a long time constant, and the disturbances of changing flow and chlorine demand. The Astrom-Hagglund relay feedback procedure provides acceptable control while data is logged to determine the controller constants. Experiences in using the procedure in existing facilities (not redesigning the mixing point) and the quality of control are presented.

scholarly journals Manufacturing, Characterisation and Mechanical Analysis of Polyacrylonitrile Membranes

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2378
Author(s):  
Mertol Tüfekci ◽  
Sevgi Güneş Durak ◽  
İnci Pir ◽  
Türkan Ormancı Acar ◽  
Güler Türkoğlu Demirkol ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Main Idea ◽  
Mechanical Analysis ◽  
Operating Conditions ◽  
Load Carrying Capacity ◽  
The Finite Element Method ◽  
Load Carrying ◽  
The Impact ◽  
Static Behaviour ◽  
Modelling Process

To investigate the effect of polyvinylpyrrolidone (PVP) addition and consequently porosity, two different sets of membranes are manufactured, since PVP is a widely used poring agent which has an impact on the mechanical properties of the membrane material. The first set (PAN 1) includes polyacrylonitrile (PAN) and the necessary solvent while the second set (PAN 2) is made of PAN and PVP. These membranes are put through several characterisation processes including tensile testing. The obtained data are used to model the static behaviour of the membranes with different geometries but similar loading and boundary conditions that represent their operating conditions. This modelling process is undertaken by using the finite element method. The main idea is to investigate how geometry affects the load-carrying capacity of the membranes. Alongside membrane modelling, their materials are modelled with representative elements with hexagonal and rectangular pore arrays (RE) to understand the impact of porosity on the mechanical properties. Exploring the results, the best geometry is found as the elliptic membrane with the aspect ratio 4 and the better RE as the hexagonal array which can predict the elastic properties with an approximate error of 12%.

scholarly journals Growth and biochemical composition of Chlorella vulgaris in different growth media

2013 ◽  
Vol 85 (4) ◽  
pp. 1427-1438 ◽  
Author(s):  
MATHIAS A. CHIA ◽  
ANA T. LOMBARDI ◽  
MARIA DA GRACA G. MELAO
Keyword(s):  
Biomass Production ◽  
Chlorella Vulgaris ◽  
Biochemical Composition ◽  
Physiological Response ◽  
Low Cost ◽  
Cost Effective ◽  
Growth Conditions ◽  
Growth Media ◽  
Continuous Cultures ◽  
The Cost

The need for clean and low-cost algae production demands for investigations on algal physiological response under different growth conditions. In this research, we investigated the growth, biomass production and biochemical composition of Chlorella vulgaris using semi-continuous cultures employing three growth media (LC Oligo, Chu 10 and WC media). The highest cell density was obtained in LC Oligo, while the lowest in Chu medium. Chlorophyll a, carbohydrate and protein concentrations and yield were highest in Chu and LC Oligo media. Lipid class analysis showed that hydrocarbons (HC), sterol esthers (SE), free fatty acids (FFA), aliphatic alcohols (ALC), acetone mobile polar lipids (AMPL) and phospholipids (PL) concentrations and yields were highest in the Chu medium. Triglyceride (TAG) and sterol (ST) concentrations were highest in the LC Oligo medium. The results suggested that for cost effective cultivation, LC Oligo medium is the best choice among those studied, as it saved the cost of buying vitamins and EDTA associated with the other growth media, while at the same time resulted in the best growth performance and biomass production.

Sign in / Sign up

Export Citation Format

Share Document