scholarly journals A Divergent Paired Electrochemical Process for the Conversion of Furfural Using a Divided‐Cell Flow Microreactor

ChemSusChem ◽  
2020 ◽  
Author(s):  
Yiran Cao ◽  
Jasper Knijff ◽  
Amin Delparish ◽  
Maria Fernanda Neira d'Angelo ◽  
Timothy Noёl
Keyword(s):  
Electrochemical Process ◽  
Flow Microreactor ◽  
Divided Cell

Scanning tunneling microscopy of E. coli RNA polymerase deposited onto an Au substrate by an electrochemical process

1991 ◽  
Vol 49 ◽  
pp. 378-379
Author(s):  
Rebecca W. Keller ◽  
Carlos Bustamante ◽  
David Bear
Keyword(s):  
Scanning Tunneling Microscope ◽  
Biological Sample ◽  
Substrate Surface ◽  
Electrochemical Process ◽  
Atomic Resolution ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Tunneling Microscope ◽  
E Coli ◽  
Preparation Techniques

Under ideal conditions, the Scanning Tunneling Microscope (STM) can create atomic resolution images of different kinds of samples. The STM can also be operated in a variety of non-vacuum environments. Because of its potentially high resolution and flexibility of operation, it is now being applied to image biological systems. Several groups have communicated the imaging of double and single stranded DNA.However, reproducibility is still the main problem with most STM results on biological samples. One source of irreproducibility is unreliable sample preparation techniques. Traditional deposition methods used in electron microscopy, such as glow discharge and spreading techniques, do not appear to work with STM. It seems that these techniques do not fix the biological sample strongly enough to the substrate surface. There is now evidence that there are strong forces between the STM tip and the sample and, unless the sample is strongly bound to the surface, it can be swept aside by the tip.

Rapidly Solidified Melt-spun Bi-Sn Ribbons: Surface Composition Issues

2016 ◽  
pp. 3287-3297
Author(s):  
Tarek El Ashram ◽  
Ana P. Carapeto ◽  
Ana M. Botelho do Rego
Keyword(s):  
Chemical Composition ◽  
Optical Microscopy ◽  
Melt Spinning ◽  
Surface Composition ◽  
Electrochemical Process ◽  
Melt Spun ◽  
Bismuth Alloy ◽  
The One ◽  
Rapidly Solidified ◽  
Melt Spinning Technique

Tin-bismuth alloy ribbons were produced using melt-spinning technique. The two main surfaces (in contact with the rotating wheel and exposed to the air) were characterized with Optical Microscopy and AFM, revealing that the surface exposed to the air is duller (due to a long-range heterogeneity) than the opposite surface. Also the XPS chemical composition revealed many differences between them both on the corrosion extension and on the total relative amounts of tin and bismuth. For instance, for the specific case of an alloy with a composition Bi-4 wt % Sn, the XPS atomic ratios Sn/Bi are 1.1 and 3.7 for the surface in contact with the rotating wheel and for the one exposed to air, respectively, showing, additionally, that a large segregation of tin at the surface exists (nominal ratio should be 0.073). This segregation was interpreted as the result of the electrochemical process yielding the corrosion products.

Conductive Filament Formation in Printed Circuit Boards – Effects of Reflow Conditions and Flame Retardants

2009 ◽  
Author(s):  
Bhanu Sood ◽  
Michael Pecht
Keyword(s):  
Flame Retardants ◽  
Printed Circuit Boards ◽  
Electrochemical Process ◽  
Lead Free ◽  
Circuit Boards ◽  
Filament Formation ◽  
Conductive Filament ◽  
Printed Circuit ◽  
Free Solder ◽  
Halogen Free

Abstract Failures in printed circuit boards account for a significant percentage of field returns in electronic products and systems. Conductive filament formation is an electrochemical process that requires the transport of a metal through or across a nonmetallic medium under the influence of an applied electric field. With the advent of lead-free initiatives, boards are being exposed to higher temperatures during lead-free solder processing. This can weaken the glass-fiber bonding, thus enhancing conductive filament formation. The effect of the inclusion of halogen-free flame retardants on conductive filament formation in printed circuit boards is also not completely understood. Previous studies, along with analysis and examinations conducted on printed circuit boards with failure sites that were due to conductive filament formation, have shown that the conductive path is typically formed along the delaminated fiber glass and epoxy resin interfaces. This paper is a result of a year-long study on the effects of reflow temperatures, halogen-free flame retardants, glass reinforcement weave style, and conductor spacing on times to failure due to conductive filament formation.

Use of Nafion membranes in laboratory organic electrosynthesis

1988 ◽  
Vol 53 (12) ◽  
pp. 3164-3170 ◽  
Author(s):  
Jaromír Hlavatý ◽  
Jiří Volke
Keyword(s):  
Glassy Carbon ◽  
Quaternary Ammonium ◽  
Tetrabutylammonium Bromide ◽  
Nafion Membrane ◽  
Carbon Anode ◽  
Tetrabutylammonium Hydroxide ◽  
Nafion Membranes ◽  
Divided Cell ◽  
A Cell ◽  
Tetrabutylammonium Iodide

Electrolysis of quaternary ammonium bromides and iodides in a divided cell with a Nafion membrane yields quaternary polyhalogenides at a carbon anode in water-ethanolic anolytes. The electrodialysis of tetrabutylammonium iodide in a cell with a Nafion membrane enables generation of tetrabutylammonium hydroxide. In electrolytic reduction of nitrobenzene in presence of 1,3-dibromopropane, N-phenylisooxazolidine results in an approx. 60% yield. This electrosynthesis takes place in dimethylformamide with tetrabutylammonium bromide at a glassy-carbon cathode in a divided cell. In the electroreduction of lobelanine hydrogensulfate in a divided cell in acid water-ethanolic media at a lead cathode prevalently lobelanidine has been obtained.

Selective Oxidation of Benzylic sp3 C–H Bonds using Molecular Oxygen in a Continuous-Flow Microreactor

2021 ◽  
Author(s):  
Lei Yun ◽  
Jingnan Zhao ◽  
Xiaofei Tang ◽  
Cunfei Ma ◽  
Zongyi Yu ◽  
...  
Keyword(s):  
Molecular Oxygen ◽  
Selective Oxidation ◽  
Continuous Flow ◽  
Flow Microreactor

A mini-review of heavy metal recycling technologies for municipal solid waste incineration fly ash

2021 ◽  
pp. 0734242X2110039
Author(s):  
Huan Wang ◽  
Fenfen Zhu ◽  
Xiaoyan Liu ◽  
Meiling Han ◽  
Rongyan Zhang
Keyword(s):  
Fly Ash ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Waste Incineration ◽  
Electrochemical Process ◽  
Chemical Extraction ◽  
Air Pollution Control ◽  
Municipal Solid Waste Incineration ◽  
Mswi Fly Ash ◽  
Metal Recycling

This mini-review article summarizes the available technologies for the recycling of heavy metals (HMs) in municipal solid waste incineration (MSWI) fly ash (FA). Recovery technologies included thermal separation (TS), chemical extraction (CE), bioleaching, and electrochemical processes. The reaction conditions of various methods, the efficiency of recovering HMs from MSWI FA and the difficulties and solutions in the process of technical development were studied. Evaluation of each process has also been done to determine the best HM recycling method and future challenges. Results showed that while bioleaching had minimal environmental impact, the process was time-consuming. TS and CE were the most mature technologies, but the former process was not cost-effective. Overall, it has the greatest economic potential to recover metals by CE with scrubber liquid produced by a wet air pollution control system. An electrochemical process or solvent extraction could then be applied to recover HMs from the enriched leachate. Ongoing development of TS and bioleaching technologies could reduce the treatment cost or time.

Pentafluoroethylation of Carbonyl Compounds Using HFC-125 in a Flow Microreactor System

2021 ◽  
Author(s):  
Makoto Ono ◽  
Yuji Sumii ◽  
Yamato Fujihira ◽  
Takumi Kagawa ◽  
Hideyuki Mimura ◽  
...  
Keyword(s):  
Carbonyl Compounds ◽  
Flow Microreactor

scholarly journals Low-coherence photonic method of electrochemical processes monitoring

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Monika Kosowska ◽  
Paweł Jakóbczyk ◽  
Michał Rycewicz ◽  
Alex Vitkin ◽  
Małgorzata Szczerska
Keyword(s):  
Electrochemical Process ◽  
Electrochemical Measurements ◽  
Boron Doped Diamond ◽  
Silica Substrate ◽  
Low Coherence ◽  
Optical Responses ◽  
Boron Doped ◽  
Fabry Perot ◽  
Hybrid Characterization

AbstractWe present an advanced multimodality characterization platform for simultaneous optical and electrochemical measurements of ferrocyanides. Specifically, we combined a fiber-optic Fabry–Perot interferometer with a three-electrode electrochemical setup to demonstrate a proof-of-principle of this hybrid characterization approach, and obtained feasibility data in its monitoring of electrochemical reactions in a boron-doped diamond film deposited on a silica substrate. The film plays the dual role of being the working electrode in the electrochemical reaction, as well as affording the reflectivity to enable the optical interferometry measurements. Optical responses during the redox reactions of the electrochemical process are presented. This work proves that simultaneous opto-electrochemical measurements of liquids are possible.

scholarly journals Chemical–Electrochemical Process Concept for Lead Recovery from Waste Cathode Ray Tube Glass

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1546
Author(s):  
Árpád Imre-Lucaci ◽  
Melinda Fogarasi ◽  
Florica Imre-Lucaci ◽  
Szabolcs Fogarasi
Keyword(s):  
Flow Rate ◽  
Current Density ◽  
Complete Recovery ◽  
Electrochemical Process ◽  
Operating Conditions ◽  
General Effect ◽  
Optimal Operating ◽  
Recirculation Flow ◽  
Lead Recovery ◽  
Cathode Ray Tube

This paper presents a novel approach for the recovery of lead from waste cathode-ray tube (CRT) glass by applying a combined chemical-electrochemical process which allows the simultaneous recovery of Pb from waste CRT glass and electrochemical regeneration of the leaching agent. The optimal operating conditions were identified based on the influence of leaching agent concentration, recirculation flow rate and current density on the main technical performance indicators. The experimental results demonstrate that the process is the most efficient at 0.6 M acetic acid concentration, flow rate of 45 mL/min and current density of 4 mA/cm2. The mass balance data corresponding to the recycling of 10 kg/h waste CRT glass in the identified optimal operating conditions was used for the environmental assessment of the process. The General Effect Indices (GEIs), obtained through the Biwer Heinzle method for the input and output streams of the process, indicate that the developed recovery process not only achieve a complete recovery of lead but it is eco-friendly as well.

Sign in / Sign up

Export Citation Format

Share Document