A scalable high‐speed hybrid 1‐bit full adder design using XOR‐XNOR module

2021 ◽  
Author(s):  
Mehedi Hasan ◽  
Sharnali Islam ◽  
Mainul Hossain ◽  
Hasan U. Zaman
Keyword(s):  
High Speed ◽  
Full Adder

Performance Analysis of Various Multipliers Using 8T-full Adder with 180nm Technology

2020 ◽  
Vol 13 (6) ◽  
pp. 864-870
Author(s):  
Sai Venkatramana Prasada G.S ◽  
G. Seshikala ◽  
S. Niranjana
Keyword(s):  
Low Power ◽  
Power Dissipation ◽  
High Speed ◽  
High Performance ◽  
Full Adder ◽  
Fundamental Operation ◽  
Wallace Tree ◽  
Power Delay Product ◽  
The Comparative Study ◽  
Wallace Tree Multiplier

Background: This paper presents the comparative study of power dissipation, delay and power delay product (PDP) of different full adders and multiplier designs. Methods: Full adder is the fundamental operation for any processors, DSP architectures and VLSI systems. Here ten different full adder structures were analyzed for their best performance using a Mentor Graphics tool with 180nm technology. Results: From the analysis result high performance full adder is extracted for further higher level designs. 8T full adder exhibits high speed, low power delay and low power delay product and hence it is considered to construct four different multiplier designs, such as Array multiplier, Baugh Wooley multiplier, Braun multiplier and Wallace Tree multiplier. These different structures of multipliers were designed using 8T full adder and simulated using Mentor Graphics tool in a constant W/L aspect ratio. Conclusion: From the analysis, it is concluded that Wallace Tree multiplier is the high speed multiplier but dissipates comparatively high power. Baugh Wooley multiplier dissipates less power but exhibits more time delay and low PDP.

Proposing a novel low-power high-speed mixed GDI Full Adder topology

2010 ◽  
Author(s):  
Adarsh Kumar Agrawal ◽  
Shivshankar Mishra ◽  
R. K. Nagaria
Keyword(s):  
Low Power ◽  
High Speed ◽  
Full Adder

scholarly journals A CNFET full adder cell design for high-speed arithmetic units

2017 ◽  
Vol 25 ◽  
pp. 2399-2409 ◽  
Author(s):  
Mokhtar MOHAMMADI GHANATGHESTANI ◽  
Behnam GHAVAMI ◽  
Honeya SALEHPOUR
Keyword(s):  
High Speed ◽  
Full Adder ◽  
Cell Design ◽  
Arithmetic Units

scholarly journals A high-speed hybrid Full Adder with low power consumption

2012 ◽  
Vol 9 (24) ◽  
pp. 1900-1905
Author(s):  
Kamran Delfan Hemmati ◽  
Mojtaba Behzad Fallahpour ◽  
Abbas Golmakani ◽  
Kamyar Delfan Hemmati
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
Full Adder ◽  
Low Power Consumption

scholarly journals High-Speed Hybrid-Logic Full Adder Using High-Performance 10-T XOR–XNOR Cell

2021 ◽  
pp. 263-269
Author(s):  
Tejaswini M. L ◽  
Aishwarya H ◽  
Akhila M ◽  
B. G. Manasa
Keyword(s):  
High Speed ◽  
High Performance ◽  
Full Adder ◽  
Cmos Technology ◽  
Power Performance ◽  
High Speed Design ◽  
Power Delay Product ◽  
Full Swing ◽  
Output Swing ◽  
High Output

The main aim of our work is to achieve low power, high speed design goals. The proposed hybrid adder is designed to meet the requirements of high output swing and minimum power. Performance of hybrid FA in terms of delay, power, and driving capability is largely dependent on the performance of XOR-XNOR circuit. In hybrid FAs maximum power is consumed by XOR-XNOR circuit. In this paper 10T XOR-XNOR is proposed, which provide good driving capabilities and full swing output simultaneously without using any external inverter. The performance of the proposed circuit is measured by simulating it in cadence virtuoso environment using 90-nm CMOS technology. This circuit outperforms its counterparts showing power delay product is reduced than that of available XOR-XNOR modules. Four different full adder designs are proposed utilizing 10T XOR-XNOR, sum and carry modules. The proposed FAs provide improvement in terms of PDP than that of other architectures. To evaluate the performance of proposed full adder circuit, we embedded it in a 4-bit and 8-bit cascaded full adder. Among all FAs two of the proposed FAs provide the best performance for a higher number of bits.

scholarly journals Performance Analysis of a Low Power High Speed Hybrid Full Adder Circuit and Full Subtractor Circuit

2021 ◽  
Vol 12 (3) ◽  
pp. 3037-3045
Author(s):  
M. Naga Gowtham Et.al
Keyword(s):  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Transmission Gate ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper, a hybrid 1-bit adder and 1-bit Subtractor designs are implemented. The hybrid adder circuit is constructed using CMOS (complementary metal oxide semiconductor) logic along with pass transistor logic. The design can be extended 16 and 32 bits lately. The proposed full adder circuit is compared with the existing conventional adders in terms of power, delay and area in order to obtain a better circuit that serves the present day needs of people. The existing 1-bit hybrid adder uses EXNOR logic combined with the transmission gate logic. For a supply voltage of 1.8V the average power consumption (4.1563 µW) which is extremely low with moderately low delay (224 ps) resulting because of the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. At 1.2V supply the power and delay were recorded to be 1.17664 µW and 91.3 ps. The design was implemented using 1-bit which can also be extended into a 32-bit design later. The designed implementation offers a better performance in terms of power and speed compared to the existing full adder design styles. The circuits were implemented in DSCH2 and Microwind tools respectively. The parameters such as power, delay, layout area and speed of the proposed circuit design is compared with pass transistor logic, adiabatic logic, transmission gate adder and so on. The circuit is also designed with a decrease in transistors in order to get the better results. Full Subtractor, a combinational digital circuit which performs 1-bit subtraction with borrow in is designed as a part of this project. The main aim behind this part of the project is to design a 1-bit full Subtractor using CMOS technology with reduced number of transistors and hence the efficiency in terms of area, power and speed have been calculated is designed using 8,10,15and 16 transistors. The parameters were calculated in each case and the results have been tabulated.

scholarly journals Novel Design of Low-Power High-Speed Hybrid Full Adder Design using Gate Diffusion Input (GDI) Technique

2020 ◽  
Vol 9 (12) ◽  
pp. 323-328
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
Critical Path ◽  
Circuit Simulation ◽  
Full Adder ◽  
Cmos Process ◽  
Path Delay ◽  
Process Technology ◽  
Xnor Gate

VLSI technology become one of the most significant and demandable because of the characteristics like device portability, device size, large amount of features, expenditure, consistency, rapidity and many others. Multipliers and Adders place an important role in various digital systems such as computers, process controllers and signal processors in order to achieve high speed and low power. Two input XOR/XNOR gate and 2:1 multiplexer modules are used to design the Hybrid Full adders. The XOR/XNOR gate is the key punter of power included in the Full adder cell. However this circuit increases the delay, area and critical path delay. Hence, the optimum design of the XOR/XNOR is required to reduce the power consumption of the Full adder Cell. So a 6 New Hybrid Full adder circuits are proposed based on the Novel Full-Swing XOR/XNOR gates and a New Gate Diffusion Input (GDI) design of Full adder with high-swing outputs. The speed, power consumption, power delay product and driving capability are the merits of the each proposed circuits. This circuit simulation was carried used cadence virtuoso EDA tool. The simulation results based on the 90nm CMOS process technology model.

Sign in / Sign up

Export Citation Format

Share Document