A Review of Three-Dimensional In Vitro Tissue Models for Drug Discovery and Transport Studies

2011 ◽  
Vol 100 (1) ◽  
pp. 59-74 ◽  
Author(s):  
Nelita T. Elliott ◽  
Fan Yuan
2021 ◽  
Vol 22 (3) ◽  
pp. 1203
Author(s):  
Lu Qian ◽  
Julia TCW

A high-throughput drug screen identifies potentially promising therapeutics for clinical trials. However, limitations that persist in current disease modeling with limited physiological relevancy of human patients skew drug responses, hamper translation of clinical efficacy, and contribute to high clinical attritions. The emergence of induced pluripotent stem cell (iPSC) technology revolutionizes the paradigm of drug discovery. In particular, iPSC-based three-dimensional (3D) tissue engineering that appears as a promising vehicle of in vitro disease modeling provides more sophisticated tissue architectures and micro-environmental cues than a traditional two-dimensional (2D) culture. Here we discuss 3D based organoids/spheroids that construct the advanced modeling with evolved structural complexity, which propels drug discovery by exhibiting more human specific and diverse pathologies that are not perceived in 2D or animal models. We will then focus on various central nerve system (CNS) disease modeling using human iPSCs, leading to uncovering disease pathogenesis that guides the development of therapeutic strategies. Finally, we will address new opportunities of iPSC-assisted drug discovery with multi-disciplinary approaches from bioengineering to Omics technology. Despite technological challenges, iPSC-derived cytoarchitectures through interactions of diverse cell types mimic patients’ CNS and serve as a platform for therapeutic development and personalized precision medicine.


2018 ◽  
Vol 38 (1) ◽  
pp. 158-169 ◽  
Author(s):  
Ashutosh Bandyopadhyay ◽  
Vimal Kumar Dewangan ◽  
Kiran Yellappa Vajanthri ◽  
Suruchi Poddar ◽  
Sanjeev Kumar Mahto

2020 ◽  
Vol 21 (18) ◽  
pp. 6806 ◽  
Author(s):  
Fabrizio Fontana ◽  
Michela Raimondi ◽  
Monica Marzagalli ◽  
Michele Sommariva ◽  
Nicoletta Gagliano ◽  
...  

In the last decade, three-dimensional (3D) cell culture technology has gained a lot of interest due to its ability to better recapitulate the in vivo organization and microenvironment of in vitro cultured cancer cells. In particular, 3D tumor models have demonstrated several different characteristics compared with traditional two-dimensional (2D) cultures and have provided an interesting link between the latter and animal experiments. Indeed, 3D cell cultures represent a useful platform for the identification of the biological features of cancer cells as well as for the screening of novel antitumor agents. The present review is aimed at summarizing the most common 3D cell culture methods and applications, with a focus on prostate cancer modeling and drug discovery.


2019 ◽  
Vol 25 (3) ◽  
pp. 753-761 ◽  
Author(s):  
Warren Colomb ◽  
Matthew Osmond ◽  
Charles Durfee ◽  
Melissa D. Krebs ◽  
Susanta K. Sarkar

AbstractThe absence of quantitative in vitro cell–extracellular matrix models represents an important bottleneck for basic research and human health. Randomness of cellular distributions provides an opportunity for the development of a quantitative in vitro model. However, quantification of the randomness of random cell distributions is still lacking. In this paper, we have imaged cellular distributions in an alginate matrix using a multiview light sheet microscope and developed quantification metrics of randomness by modeling it as a Poisson process, a process that has constant probability of occurring in space or time. We imaged fluorescently labeled human mesenchymal stem cells embedded in an alginate matrix of thickness greater than 5 mm with $\sim\! {\rm 2}{\rm. 9} \pm {\rm 0}{\rm. 4}\,\mu {\rm m}$ axial resolution, the mean full width at half maximum of the axial intensity profiles of fluorescent particles. Simulated randomness agrees well with the experiments. Quantification of distributions and validation by simulations will enable quantitative study of cell–matrix interactions in tissue models.


Author(s):  
Loh Teng Hern Tan ◽  
Liang Ee Low ◽  
Siah Ying Tang ◽  
Wei Hsum Yap ◽  
Lay Hong Chuah ◽  
...  

Three-dimensional cell culture methods revolutionize the field of anticancer drug discovery, forming an important link-bridge between conventional in vitro and in vivo models and conferring significant clinical and biological relevant data. The current work presents an affordable yet reproducible method of generating homogenous 3D tumor spheroids. Also, a new open source software is adapted to perform an automated image analysis of 3D tumor spheroids and subsequently generate a list of morphological parameters of which could be utilized to determine the response of these spheroids toward treatments. Our data showed that this work could serve as a reliable 3D cell culture platform for preclinical cytotoxicity testing of natural products prior to the expensive and time-consuming animal models


2018 ◽  
Vol 373 (1750) ◽  
pp. 20170228 ◽  
Author(s):  
Dominic P. Williams

Hepatic stress and injury from drugs continues to be a major concern within the pharmaceutical industry, leading to preclinical and clinical attrition precautionary warnings and post-market withdrawal of drugs. There is a requirement for more predictive and mechanistically accurate models to aid risk assessment. Primary human hepatocytes, subject to isolation stress, cryopreservation, donor-to-donor variation and a relatively short period of functional capability in two-dimensional cultures, are not suitable for high-throughput screening procedures. There are two areas within the drug discovery pipeline that the generation of a stable, metabolically functional hepatocyte-like cell with unlimited supply would have major impact. First, in routine, cell health risk-assessment assays where hepatic cell lines are typically deployed. Second, at later stages of the drug discovery pipeline approaching candidate nomination where bespoke/investigational studies refining and understanding the risk to patients use patient-derived induced pluripotent stem cell (iPSC) hepatocytes retaining characteristics from the patient, e.g. HLA susceptibility alleles, iPSC hepatocytes with defined disease phenotypes or genetic characteristics that have the potential to make the hepatocyte more sensitive to a particular stress mechanism. Functionality of patient-centric hepatocyte-like cells is likely to be enhanced when coupled with emerging culture systems, such as three-dimensional spheroids or microphysiological systems. Ultimately, the aspiration to confidently use human-relevant in vitro models to predict human-specific hepatic toxicity depends on the integration of promising emerging technologies. This article is part of the theme issue ‘Designer human tissue: coming to a lab near you’.


2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Francesca Aredia ◽  
Francesca Carpignano ◽  
Salvatore Surdo ◽  
Giuseppe Barillaro ◽  
Giuliano Mazzini ◽  
...  

We recently employed three-dimensional (3D) silicon microstructures (SMSs) consisting in arrays of 3 μm-thick silicon walls separated by 50 μm-deep, 5 μm-wide gaps, as microincubators for monitoring the biomechanical properties of tumor cells. They were here applied to investigate the in vitro behavior of HT1080 human fibrosarcoma cells driven to apoptosis by the chemotherapeutic drug Bleomycin. Our results, obtained by fluorescence microscopy, demonstrated that HT1080 cells exhibited a great ability to colonize the narrow gaps. Remarkably, HT1080 cells grown on 3D-SMS, when treated with the DNA damaging agent Bleomycin under conditions leading to apoptosis, tended to shrink, reducing their volume and mimicking the normal behavior of apoptotic cells, and were prone to leave the gaps. Finally, we performed label-free detection of cells adherent to the vertical silicon wall, inside the gap of 3D-SMS, by exploiting optical low coherence reflectometry using infrared, low power radiation. This kind of approach may become a new tool for increasing automation in the drug discovery area. Our results open new perspectives in view of future applications of the 3D-SMS as the core element of a lab-on-a-chip suitable for screening the effect of new molecules potentially able to kill tumor cells.


2017 ◽  
Vol 22 (5) ◽  
pp. 635-644
Author(s):  
Ning Zhang ◽  
Vincent Milleret ◽  
Greta Thompson-Steckel ◽  
Ning-Ping Huang ◽  
János Vörös ◽  
...  

Three-dimensional (3D) cell culture models are gaining increasing interest for use in drug development pipelines due to their closer resemblance to human tissues. Hydrogels are the first-choice class of materials to recreate in vitro the 3D extra-cellular matrix (ECM) environment, important in studying cell-ECM interactions and 3D cellular organization and leading to physiologically relevant in vitro tissue models. Here we propose a novel hydrogel platform consisting of a 96-well plate containing pre-cast synthetic PEG-based hydrogels for the simple establishment of 3D (co-)culture systems without the need for the standard encapsulation method. The in-depth density gradient at the surface of the hydrogel promotes the infiltration of cells deposited on top of it. The ability to decouple hydrogel production and cell seeding is intended to simplify the use of hydrogel-based platforms and thus increase their accessibility. Using this platform, we established 3D cultures relevant for studying stem cell differentiation, angiogenesis, and neural and cancer models.


2009 ◽  
Vol 3 (2) ◽  
pp. 103-117 ◽  
Author(s):  
Francesco Pampaloni ◽  
Ernst Stelzer ◽  
Andrea Masotti

Sign in / Sign up

Export Citation Format

Share Document