Effect of Channeling on the Scintillation Response of NaI(Tl) to Positive Ions

1973 ◽  
pp. 575-581
Author(s):  
R. B. Murray ◽  
M. R. Altman ◽  
H. B. Dietrich ◽  
T. J. Rock
Keyword(s):  
Positive Ions

A New AID for Interpolating and Assessing Collision Strengths and Rate Coefficients

1988 ◽  
Vol 102 ◽  
pp. 107-110
Author(s):  
A. Burgess ◽  
H.E. Mason ◽  
J.A. Tully
Keyword(s):  
Significant Loss ◽  
Impact Excitation ◽  
Rate Coefficients ◽  
Electron Impact Excitation ◽  
Graphical Display ◽  
Practical Procedure ◽  
Positive Ions ◽  
Allowed Transition ◽  
Computational Errors ◽  
Existing Data

AbstractA new way of critically assessing and compacting data for electron impact excitation of positive ions is proposed. This method allows one (i) to detect possible printing and computational errors in the published tables, (ii) to interpolate and extrapolate the existing data as a function of energy or temperature, and (iii) to simplify considerably the storage and transfer of data without significant loss of information. Theoretical or experimental collision strengths Ω(E) are scaled and then plotted as functions of the colliding electron energy, the entire range of which is conveniently mapped onto the interval (0,1). For a given transition the scaled Ω can be accurately represented - usually to within a fraction of a percent - by a 5 point least squares spline. Further details are given in (2). Similar techniques enable thermally averaged collision strengths upsilon (T) to be obtained at arbitrary temperatures in the interval 0 < T < ∞. Application of the method is possible by means of an interactive program with graphical display (2). To illustrate this practical procedure we use the program to treat Ω for the optically allowed transition 2s → 2p in ArXVI.

Numerical Simulation of Leakage Current on Conductive Insulator Surface

2019 ◽  
Vol 8 (4) ◽  
pp. 9487-9492
Keyword(s):  
Numerical Simulation ◽  
Electric Field ◽  
Leakage Current ◽  
Method Of Lines ◽  
Electron Attachment ◽  
Negative Ions ◽  
Conduction Current ◽  
Insulator Surface ◽  
Finite Difference Approximations ◽  
Positive Ions

The outdoor insulator is commonly exposed to environmental pollution. The presence of water like raindrops and dew on the contaminant surface can lead to surface degradation due to leakage current. However, the physical process of this phenomenon is not well understood. Hence, in this study we develop a mathematical model of leakage current on the outdoor insulator surface using the Nernst Planck theory which accounts for the charge transport between the electrodes (negative and positive electrode) and charge generation mechanism. Meanwhile the electric field obeys Poisson’s equation. Method of Lines technique is used to solve the model numerically in which it converts the PDE into a system of ODEs by Finite Difference Approximations. The numerical simulation compares reasonably well with the experimental conduction current. The findings from the simulation shows that the conduction current is affected by the electric field distribution and charge concentration. The rise of the conduction current is due to the distribution of positive ion while the dominancy of electron attachment with neutral molecule and recombination with positive ions has caused a significant reduction of electron and increment of negative ions.

scholarly journals Effect of Low-Pressure Plasma Treatment Parameters on Wrinkle Features

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3852
Author(s):  
Bongjun Gu ◽  
Dongwook Ko ◽  
Sungjin Jo ◽  
Dong Choon Hyun ◽  
Hyeon-Ju Oh ◽  
...  
Keyword(s):  
Power Flow ◽  
Treatment Time ◽  
Argon Plasma ◽  
Negative Ions ◽  
Low Pressure ◽  
Nitrogen Plasma ◽  
Pressure Plasma ◽  
Positive Ions ◽  
Low Pressure Plasma ◽  
Optical Adhesive

Wrinkles attract significant attention due to their ability to enhance the mechanical and optical characteristics of various optoelectronic devices. We report the effect of the plasma gas type, power, flow rate, and treatment time on the wrinkle features. When an optical adhesive was treated using a low-pressure plasma of oxygen, argon, and nitrogen, the oxygen and argon plasma generated wrinkles with the lowest and highest wavelengths, respectively. The increase in the power of the nitrogen and oxygen plasma increased the wavelengths and heights of the wrinkles; however, the increase in the power of the argon plasma increased the wavelengths and decreased the heights of the wrinkles. Argon molecules are heavier and smaller than nitrogen and oxygen molecules that have similar weights and sizes; moreover, the argon plasma comprises positive ions while the oxygen and nitrogen plasma comprise negative ions. This resulted in differences in the wrinkle features. It was concluded that a combination of different plasma gases could achieve exclusive control over either the wavelength or the height and allow a thorough analysis of the correlation between the wrinkle features and the characteristics of the electronic devices.

The mobility of positive ions with large He I halos

1977 ◽  
Vol 60 (5) ◽  
pp. 417-418 ◽  
Author(s):  
F.J. Bartis
Keyword(s):  
Positive Ions

scholarly journals Effect of External Charging on Nanoparticle Formation in a Flame

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2891
Author(s):  
Elena Fomenko ◽  
Igor Altman ◽  
Igor E. Agranovski
Keyword(s):  
Negative Ions ◽  
Formation Processes ◽  
Particle Charge ◽  
Mgo Nanoparticles ◽  
Nanoparticle Formation ◽  
Noticeable Change ◽  
Nanoparticle Shape ◽  
Positive Ions ◽  
Direct Interpretation ◽  
Shape Of Nanoparticles

This paper attempts to demonstrate the importance of the nanoparticle charge in the synthesis flame, for the mechanism of their evolution during formation processes. An investigation was made of MgO nanoparticles formed during combustion of magnesium particles. The cubic shape of nanoparticles in an unaffected flame allows for direct interpretation of results on the external flame charging, using a continuous unipolar emission of ions. It was found that the emission of negative ions applied to the flame strongly affects the nanoparticle shape, while the positive ions do not lead to any noticeable change. The demonstrated effect emphasizes the need to take into account all of the phenomena responsible for the particle charge when modeling the nanoparticle formation in flames.

Effects of Space Charge on ESEM Gas Amplification

1997 ◽  
Vol 3 (S2) ◽  
pp. 609-610 ◽  
Author(s):  
B.L. Thiel ◽  
M.R. Hussein-Ismail ◽  
A.M. Donald
Keyword(s):  
Electric Field ◽  
Electrostatic Field ◽  
Secondary Electron ◽  
Sample Surface ◽  
Cascade Process ◽  
Secondary Electrons ◽  
Positive Ions ◽  
Space Charges ◽  
Cascade Amplification ◽  
Environmental Sem

We have performed a theoretical investigation of the effects of space charges in the Environmental SEM (ESEM). The ElectroScan ESEM uses an electrostatic field to cause gas cascade amplification of secondary electron signals. Previous theoretical descriptions of the gas cascade process in the ESEM have assumed that distortion of the electric field due to space charges can be neglected. This assumption has now been tested and shown to be valid.In the ElectroScan ESEM, a positively biased detector is located above the sample, creating an electric field on the order of 105 V/m between the detector and sample surface. Secondary electrons leaving the sample are cascaded though the gas, amplifying the signal and creating positive ions. Because the electrons move very quickly through the gas, they do not accumulate in the specimen-to-detector gap. However, the velocity of the positive ions is limited by diffusion.

Sign in / Sign up

Export Citation Format

Share Document