Comparison of Vehicle Exhaust Emissions with Gasoline Engines of Different Ecological Classes in Road Tests

2019 ◽  
pp. 330-340
Author(s):  
Jacek Pielecha ◽  
Jerzy Merkisz ◽  
Karolina Kurtyka
Keyword(s):  
Exhaust Emissions ◽  
Vehicle Exhaust ◽  
Gasoline Engines

scholarly journals Spatiotemporal distribution of light-absorbing carbon and its relationship to other atmospheric pollutants in Stockholm

2011 ◽  
Vol 11 (22) ◽  
pp. 11553-11567 ◽  
Author(s):  
P. Krecl ◽  
A. C. Targino ◽  
C. Johansson
Keyword(s):  
Exhaust Emissions ◽  
Atmospheric Pollutants ◽  
Spatiotemporal Variability ◽  
Rural Site ◽  
Strong Increase ◽  
Population Exposure ◽  
Emission Sources ◽  
Vehicle Exhaust ◽  
Urban Background ◽  
Urban Sites

Abstract. Carbon-containing particles have deleterious effects on both Earth's climate and human health. In Europe, the main sources of light-absorbing carbon (LAC) emissions are the transport (67%) and residential (25%) sectors. Information on the spatiotemporal variability of LAC particles in urban areas is relevant for air quality management and to better diagnose the population exposure to these particles. This study reports on results of an intensive field campaign conducted at four sites (two kerbside stations, one urban background site and a rural station) in Stockholm, Sweden, during the spring 2006. Light-absorbing carbon mass (MLAC) concentrations were measured with custom-built Particle Soot Absorption Photometers (PSAP). The spatiotemporal variability of MLAC concentrations was explored by examining correlation coefficients (R), coefficients of divergence (COD), and diurnal patterns at all sites. Simultaneous measurements of NOx, PM10, PM2.5, and meteorological variables were also carried out at the same locations to help characterize the LAC emission sources. Hourly mean (± standard deviation) MLAC concentrations ranged from 0.36±0.50 at the rural site to 5.39±3.60 μg m−3 at the street canyon site. Concentrations of LAC between urban sites were poorly correlated even for daily averages (R<0.70), combined with highly heterogeneously distributed concentrations (COD>0.30) even at spatial scales of few kilometers. This high variability is connected to the distribution of emission sources and processes contributing to the LAC fraction at these sites. At urban sites, MLAC tracked NOx levels and traffic density well and mean MLAC/PM2.5 ratios were larger (26–38%) than at the background sites (4–10%). The results suggest that vehicle exhaust emissions are the main responsible for the high MLAC concentrations found at the urban locations whereas long-range transport (LRT) episodes of combustion-derived particles can generate a strong increase of levels at background sites. To decrease pollution levels at kerbside and urban background locations in Stockholm, we recommend abatement strategies that target reductions of vehicle exhaust emissions, which are the main contributors to MLAC and NOx concentrations.

Tumble Flow Measurements Using Three Different Methods and Its Effects on Fuel Economy and Emissions

2006 ◽  
Author(s):  
Myoungjin Kim ◽  
Sihun Lee ◽  
Wootae Kim
Keyword(s):  
Fuel Economy ◽  
High Performance ◽  
Gasoline Engine ◽  
Exhaust Emissions ◽  
Combustion Stability ◽  
Lean Burn ◽  
Flow Measurements ◽  
Part Load ◽  
Gasoline Engines ◽  
Dynamometer Test

In-cylinder flows such as tumble and swirl have an important role on the engine combustion efficiencies and emission formations. In particular, the tumble flow, which is dominant in-cylinder flow in current high performance gasoline engines, has an important effect on the fuel consumptions and exhaust emissions under part load conditions. Therefore, it is important to know the effect of the tumble ratio on the part load performance and optimize the tumble ratio of a gasoline engine for better fuel economy and exhaust emissions. First step in optimizing a tumble flow is to measure a tumble ratio accurately. In this research the tumble flow was measured, compared and correlated using three different measurement methods: steady flow rig, 2-Dimensional PIV, and 3-Dimensional PTV. Engine dynamometer test was performed to find out the effect of the tumble ratio on the part load performance. Dynamometer test results of high tumble ratio engine showed faster combustion speed, retarded MBT timing, higher exhaust emissions, and a better lean burn combustion stability. Lean limit of the baseline engine was expanded from A/F=18:1 to A/F=21:1 by increasing a tumble ratio using MTV.

scholarly journals Impact of freeway weaving segment design on light-duty vehicle exhaust emissions

2018 ◽  
Vol 68 (6) ◽  
pp. 564-575 ◽  
Author(s):  
Qing Li ◽  
Fengxiang Qiao ◽  
Lei Yu ◽  
Shuyan Chen ◽  
Tiezhu Li
Keyword(s):  
Exhaust Emissions ◽  
Vehicle Exhaust ◽  
Light Duty ◽  
Light Duty Vehicle

scholarly journals Pollution Characteristics of Atmospheric Carbonyls in Urban Linfen in Winter

Atmosphere ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 685
Author(s):  
Fanxiu Li ◽  
Hengyuan Wang ◽  
Xuezhong Wang ◽  
Zhigang Xue ◽  
Liqin Duan ◽  
...  
Keyword(s):  
Urban Area ◽  
Atmospheric Chemistry ◽  
Mass Concentration ◽  
High Performance ◽  
Exhaust Emissions ◽  
Photochemical Reactions ◽  
Vehicle Exhaust ◽  
Pollution Characteristics ◽  
The North ◽  
Mass Concentrations

Atmospheric carbonyls (aldehyde and ketone compounds) can be precursors for ozone and PM2.5, and they play an essential role in atmospheric chemistry. Linfen is a basin between mountains on the east and west, and there are many coking plants on the north and south sides of its urban area. The special topography and unfortunate industrial layout have frequently contributed to serious air pollution in Linfen. In order to investigate the pollution characteristics of atmospheric carbonyls in winter in urban Linfen, the carbonyl compounds were collected from the Municipal Committee site (MC) and the Yaowangtai site (YWT) from 16 to 25 January 2019, and their concentrations were analyzed by a high performance liquid chromatography-ultraviolet detector (HPLC-UV). The results show that formaldehyde, acetaldehyde, and acetone were the most abundant compounds, accounting for more than 70% of the total mass concentration of carbonyls in urban Linfen. Levels of these three carbonyls increased during the morning and evening traffic rush hours. The mass concentration of formaldehyde at both sites reached peak values at around noon (10:00–14:00). In addition, the mass concentrations of formaldehyde, acetaldehyde, and acetone were positively correlated with CO mass concentrations, whereas only formaldehyde and acetaldehyde were positively correlated with temperature. Therefore, atmospheric formaldehyde in urban Linfen’s winter mainly came from vehicle exhaust emissions and the secondary generation of photochemical reactions. Most of the acetaldehyde came from vehicle exhaust emissions, and photochemical reactions also partially contributed to it. For acetone, vehicle exhaust emissions were the main source. In addition, coking industry emissions from Northern Linfen′s Hongtong County may also have contributed to the atmospheric carbonyls in the urban area of Linfen. For the first time, this study found that formaldehyde showed different behavior to acetaldehyde and acetone; that is, the nighttime decrease in formaldehyde mass concentration was greater than that of acetaldehyde and acetone.

scholarly journals Source Profiles for PM10-2.5 Resuspended Dust and Vehicle Exhaust Emissions in Central India

2018 ◽  
Vol 18 (7) ◽  
pp. 1660-1672 ◽  
Author(s):  
Shamsh Pervez ◽  
Shahina Bano ◽  
John G. Watson ◽  
Judith C. Chow ◽  
Jeevan Lal Matawle ◽  
...  
Keyword(s):  
Central India ◽  
Exhaust Emissions ◽  
Vehicle Exhaust ◽  
Source Profiles

scholarly journals Constructing an Environmental Friendly Low-Carbon-Emission Intelligent Transportation System Based on Big Data and Machine Learning Methods

2020 ◽  
Vol 12 (19) ◽  
pp. 8118
Author(s):  
Tu Peng ◽  
Xu Yang ◽  
Zi Xu ◽  
Yu Liang
Keyword(s):  
Sustainable Development ◽  
Environmental Pollution ◽  
Carbon Emissions ◽  
Carbon Emission ◽  
Intelligent Transportation ◽  
Exhaust Emissions ◽  
Low Carbon ◽  
Vehicle Exhaust ◽  
The Sustainable Development ◽  
Low Carbon Emission

The sustainable development of mankind is a matter of concern to the whole world. Environmental pollution and haze diffusion have greatly affected the sustainable development of mankind. According to previous research, vehicle exhaust emissions are an important source of environmental pollution and haze diffusion. The sharp increase in the number of cars has also made the supply of energy increasingly tight. In this paper, we have explored the use of intelligent navigation technology based on data analysis to reduce the overall carbon emissions of vehicles on road networks. We have implemented a traffic flow prediction method using a genetic algorithm and particle-swarm-optimization-enhanced support vector regression, constructed a model for predicting vehicle exhaust emissions based on predicted road conditions and vehicle fuel consumption, and built our low-carbon-emission-oriented navigation algorithm based on a spatially optimized dynamic path planning algorithm. The results show that our method could help to significantly reduce the overall carbon emissions of vehicles on the road network, which means that our method could contribute to the construction of low-carbon-emission intelligent transportation systems and smart cities.

scholarly journals Design and Optimization of an Integrated Turbo-Generator and Thermoelectric Generator for Vehicle Exhaust Electrical Energy Recovery

Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3134 ◽  
Author(s):  
Prasert Nonthakarn ◽  
Mongkol Ekpanyapong ◽  
Udomkiat Nontakaew ◽  
Erik Bohez
Keyword(s):  
Diesel Engines ◽  
High Performance ◽  
Thermoelectric Generator ◽  
Waste Heat ◽  
Electrical Energy ◽  
Vehicle Exhaust ◽  
Gasoline Engines ◽  
Design And Optimization ◽  
Charging Station ◽  
Turbo Generator

The performance of turbo-generators significantly depends on the design of the power turbine. In addition, the thermoelectric generator can convert waste heat into another source of energy. This research aims to design and optimize an integrated turbo-generator and thermoelectric generator for diesel engines. The goal is to generate electricity from the vehicle exhaust gas. Electrical energy is derived from generators using the flow, pressure, and temperature of exhaust gases from combustion engines and heat-waste. In the case of turbo-generators and thermoelectric generators, the system automatically adjusts the power provided by an inverter. Typically, vehicle exhausts are discarded to the environment. Hence, the proposed conversion to electrical energy will reduce the alternator charging system. This work focuses on design optimization of a turbo-generator and thermoelectric generator for 2500 cc. diesel engines, due to their widespread usage. The concept, however, can also be applied to gasoline engines. Moreover, this model is designed for a hybrid vehicle. Charging during running will save time at the charging station. The optimization by variable van angles of 40°, 50°, 62°, 70°, and 80° shows that the best output power is 62°, which is identical to that calculated. The maximum power outputted from the designed prototype was 1262 watts when operating with an exhaust mass flow rate of 0.1024 kg/s at 3400 rpm (high performance of the engine). This research aims to reduce fuel consumption and reduce pollution from the exhaust, especially for hybrid vehicles.

Sign in / Sign up

Export Citation Format

Share Document