Mechanism Synthesis and Workspace Analysis of a Spraying Robot for Airfoil

2015 ◽  
pp. 669-679
Author(s):  
Lizhong Zhu ◽  
Liping Wang ◽  
Jingshan Zhao
Keyword(s):  
Mechanism Synthesis ◽  
Workspace Analysis

KINEMATICS AND WORKSPACE ANALYSIS OF A 3 DEGREE OF FREEDOM PARALLEL MECHANISM WITH PARALLELOGRAM LINKAGE

2017 ◽  
Vol 41 (5) ◽  
pp. 922-935
Author(s):  
HongJun San ◽  
JunSong Lei ◽  
JiuPeng Chen ◽  
ZhengMing Xiao ◽  
JunJie Zhao
Keyword(s):  
Monte Carlo ◽  
Monte Carlo Method ◽  
Analytical Method ◽  
Theoretical Basis ◽  
Parallel Mechanism ◽  
Graphical Method ◽  
Degree Of Freedom ◽  
Workspace Analysis ◽  
Fixed Base ◽  
Moving Platform

In this paper, a 3-DOF translational parallel mechanism with parallelogram linkage was studied. According to the space vector relation between the moving platform and the fixed base, the direct and inverse position solutions of this mechanism was deduced through analytical method. In addition, the error of the algorithm was analyzed, and the algorithm had turned out to be effective and to have the satisfactory computational precision. On the above basis, the workspace of this mechanism was found through graphical method, which was compared with that of finding through Monte Carlo method, and there was the feasibility for analyzing the workspace of the mechanism by graphical method. The characteristic of the mechanism was analyzed by comparing the results of two analysis methods, which provided a theoretical basis for the application of the mechanism.

scholarly journals Doublel-robot coordination workspace Analysis based on Matlab

2018 ◽  
Vol 232 ◽  
pp. 03057
Author(s):  
Wei Wang ◽  
Yong Xu
Keyword(s):  
Boundary Surface ◽  
Value Theory ◽  
Working Space ◽  
The Monte Carlo Method ◽  
Workspace Analysis ◽  
Solution Equation ◽  
Space Boundary ◽  
Robot Cooperation ◽  
Limit Position ◽  
Cooperation System

Aiming at the requirements of dual robot collaborative operation, a dual robot cooperation system model is established in SolidWorks2012 software to study the dual robot cooperation space. The D-H parameters are established, and the kinematics positive solution equation is obtained. The dual robot cooperative kinematics model is given. Based on the Monte Carlo method, the workspace of the dual robot is solved. The extreme value theory method is used to analyze and calculate, so as to extract the precise boundary contour of the common area of the dual robot workspace, and the collaborative space boundary surface and limit position of the dual robot are determined. The optimal coordinated working space of the dual robot end effector is obtained, which lays a theoretical foundation for the coordinated trajectory planning of the dual robot.

Workspace, dexterity and dimensional optimization of microhexapod

2015 ◽  
Vol 35 (4) ◽  
pp. 341-347 ◽  
Author(s):  
E. Rouhani ◽  
M. J. Nategh
Keyword(s):  
Degrees Of Freedom ◽  
Optimization Problem ◽  
Screw Theory ◽  
Design Parameters ◽  
Dimensional Synthesis ◽  
Content Type ◽  
Workspace Analysis ◽  
The Difference ◽  
Flexure Joints ◽  
6 Degrees Of Freedom

Purpose – The purpose of this paper is to study the workspace and dexterity of a microhexapod which is a 6-degrees of freedom (DOF) parallel compliant manipulator, and also to investigate its dimensional synthesis to maximize the workspace and the global dexterity index at the same time. Microassembly is so essential in the current industry for manufacturing complicated structures. Most of the micromanipulators suffer from their restricted workspace because of using flexure joints compared to the conventional ones. In addition, the controllability of micromanipulators inside the whole workspace is very vital. Thus, it is very important to select the design parameters in a way that not only maximize the workspace but also its global dexterity index. Design/methodology/approach – Microassembly is so essential in the current industry for manufacturing complicated structures. Most of the micromanipulators suffer from their restricted workspace because of using flexure joints compared to the conventional ones. In addition, the controllability of micromanipulators inside the whole workspace is very vital. Thus, it is very important to select the design parameters in a way that not only maximize the workspace but also its global dexterity index. Findings – It has been shown that the proposed procedure for the workspace calculation can considerably speed the required calculations. The optimization results show that a converged-diverged configuration of pods and an increase in the difference between the moving and the stationary platforms’ radii cause the global dexterity index to increase and the workspace to decrease. Originality/value – The proposed algorithm for the workspace analysis is very important, especially when it is an objective function of an optimization problem based on the search method. In addition, using screw theory can simply construct the homogeneous Jacobian matrix. The proposed methodology can be used for any other micromanipulator.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

Detection of a Crank in the Stephenson-Ш Six-Bar Linkage

2011 ◽  
Vol 52-54 ◽  
pp. 909-914
Author(s):  
Yan Huo Zou ◽  
Jin Kui Chu ◽  
Xiao Ning Guo
Keyword(s):  
Circuit Analysis ◽  
New Method ◽  
Mechanism Synthesis ◽  
Center Position

Detecting the existence of a crank in the Stephenson-Ш six-bar linkage is one of the most difficult problems encountered in the mechanism synthesis. Based on the model established for the circuit analysis of the Stephenson six-bar chains, through judging whether there is a dead-center position in the circuits of this linkage, this paper presents a new method for identifying the existence of a crank in the Stephenson-Ш six-bar linkage. Some examples are given to demonstrate the validity of this method.

Design and Virtual Prototyping of Rehabilitation Aids

1997 ◽  
Author(s):  
Venkat Krovi ◽  
Vijay Kumar ◽  
G. K. Ananthasuresh ◽  
Jean-Marc Vezien
Keyword(s):  
Virtual Prototyping ◽  
Assistive Devices ◽  
Cad Model ◽  
Mechanism Synthesis ◽  
Design And Optimization ◽  
Revolute Joints ◽  
Synthesis Design ◽  
Serial Chain

Abstract This paper presents a paradigm for virtual prototyping of a class of one-of-a-kind assistive devices that can be customized to the human user. This class consists of passive, articulated mechanical aids for manipulation that are physically coupled to the user. We address the mechanism synthesis, design and optimization and its evaluation in a virtual prototyping environment that consists of a CAD model of the product and a customized model of the human user. In addition, we develop the theory and methodology for designing planar serial chain mechanisms with revolute joints coupled by cable-pulley transmissions. As an illustrative example, we consider the design and prototyping of a customized feeding aid for quadriplegics.

A Methodology for Compliant Mechanisms Design: Part I — Introduction and Large-Deflection Analysis

1992 ◽  
Author(s):  
A. Midha ◽  
I. Her ◽  
B. A. Salamon
Keyword(s):  
Large Deflection ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Companion Paper ◽  
Computational Techniques ◽  
Shooting Methods ◽  
Mechanism Synthesis ◽  
Calculation Algorithm ◽  
Deflection Analysis ◽  
Kinematic Properties

Abstract A broader research proposal seeks to systematically combine large-deflection mechanics of flexible elements with important kinematic considerations, in yielding compliant mechanisms which perform useful tasks. Specifically, the proposed design methodology will address the following needs: development of the necessary nomenclature, classification and definitions, and identification of the kinematic properties; categorization of mechanism synthesis types, both structurally as well as by function; development of efficient computational techniques for design; consideration of materials; and application and validation. Contained herein, in particular, is an introduction to the state-of-the-art in compliant mechanisms, and the development of an accurate chain calculation algorithm for use in the analysis of a large-deflection, cantilevered elastica. Shooting methods, which permit specification of additional boundary conditions on the elastica, as well as compliant mechanism examples are presented in a companion paper.

Performance Quality, Sensitivity, and Tolerance Specification of Mechanisms

1994 ◽  
Author(s):  
Kwun-Lon Ting ◽  
Yufeng Long
Keyword(s):  
Signal To Noise Ratio ◽  
Rayleigh Quotient ◽  
Sensitivity Index ◽  
Signal To Noise ◽  
Mechanism Synthesis ◽  
Performance Quality ◽  
Mechanical Assemblies ◽  
Tolerance Specification ◽  
Position Synthesis ◽  
The Ideal

Abstract By employing Taguchi’s concept to mechanism synthesis, this paper presents the theory and technique to identify a robust design, which is the least sensitive to the tolerances, for mechanisms and to determine the tolerance specification for the best performance and manufacturability. The method is demonstrated in finite and infinitesimal position synthesis. The sensitivity Jacobian is first introduced to relate the performance tolerances and the dimensional tolerances. The Rayleigh quotient of the sensitivity Jacobian, which is equivalent to Taguchi’s signal to noise ratio, is then used to define the performance quality and a sensitivity index is introduced to measure the sensitivity of the performance quality to the dimensional tolerances for the whole system. The ideal tolerance specification is obtained in closed form. It shows how the tolerance specification affects the performance quality and that the performance quality can be significantly improved by tightening a key tolerance while loosening the others. The theory is general and the technique is readily adaptable to almost any form and type of mechanical system, including multiple-loop linkages and mechanical assemblies or even structures.

Sign in / Sign up

Export Citation Format

Share Document