ORCHID – Reduction-Ratio-Optimal Computation of Geo-spatial Distances for Link Discovery

Author(s):  
Axel-Cyrille Ngonga Ngomo
Author(s):  
Mei-Ling Liu ◽  
Guo-Hui Zhu ◽  
Heng-Qiang Tang ◽  
Xiao-Ping Ma ◽  
S. V. Subramanian
Keyword(s):  

2015 ◽  
Vol 764-765 ◽  
pp. 374-378 ◽  
Author(s):  
Long Chang Hsieh ◽  
Tzu Hsia Chen ◽  
Hsiu Chen Tang

Traditionally, the reduction ratio of a spur gear pair is limited to 4 ~ 7. For a spur gear transmission with reduction ratio more than 7, it is necessary to have more than two gear pairs. Consider the cost of production, this paper proposes a helical spur gear reducer with one gear pair having reduction ratio 19.25 to substitute the gear reducer with two gear pairs. Based on the involute theorem, the gear data of helical spur gear pair is obtained. According to the gear data, its corresponding engineering drawing is accomplished. This manuscript verify that one spur gear pair also can have high reduction ratio (20 ~ 30).


2016 ◽  
Vol 849 ◽  
pp. 376-381
Author(s):  
Ming Long Li ◽  
Yu Jie Geng ◽  
Chen Chen ◽  
Shu Jie Pang ◽  
Tao Zhang

The effects of cold-rolling with different reduction ratios of 70%-90% on the microstructure and mechanical properties of Ti50Zr30Nb10Ta10 alloy were investigated. It was found that the β-Ti phase in this alloy was stable under cold-rolling. With the increase in reduction ratio from 70% to 90%, the microstructure of the alloys evolved from deformed dendrite structure to fiber-like structure. The alloy cold-rolled with the reduction ratio of 70% exhibited optimum mechanical properties of combined high fracture strength of 1012 MPa and plastic strain of 10.1%, which are closely correlated with the dendrite structure of the alloy. It is indicated that the proper cold-rolling is an effective way to improve the mechanical properties of the titanium alloy.


2006 ◽  
Vol 53 (7) ◽  
pp. 235-242 ◽  
Author(s):  
S. Hwang ◽  
H. Jang ◽  
M. Lee ◽  
J. Song ◽  
S. Kim

In this study, integrated pretreatments and aerobic digestion processes were investigated in order to provide a feasible alternative that can achieve effective sludge reduction. An ozone treatment in the presence of ionic manganese, a catalyst, increased the sludge reduction ratio three times higher than that of a single ozonation, presumably due to an increase in OH radical production. The ozone treatment yielded the effective sludge reduction ratio with an increasing ozone dosage, and an effective dosage of the catalyst was found to be 4 mg-Mn/g-TS. When a mechanical pretreatment and an ozone/catalyst were applied in a series, the integrated process, even at a half mechanical intensity and a half level of ozone dosage, showed higher and faster sludge reduction than each single process did. In addition, the integrated pretreatment process showed the highest dewaterability of the treated sludges. A ratio of sludge cake generation, which was newly introduced to quantify overall performance of sludge treatment processes, showed that the integrated pretreatment followed by the aerobic digestion yielded approximately a half of the sludge cake volume compared to the single aerobic digestion. Therefore, the integrated pretreatment can be a feasible method for the effective reduction of total suspended solid and the final volume.


2011 ◽  
Vol 399-401 ◽  
pp. 148-151
Author(s):  
Min Li Wang ◽  
Zhi Wang Zheng ◽  
Li Xiao

Hot rolled 260MPa grade high strength Nb-IF steel sheet was used to study the effect of coiling temperature and cold reduction ratio on the microstructures and mechanical properties. The experimental results showed that the recrystallization has finished. Under 650°Ccoiling temperature and 75% cold reduction ratio, and under 600°C or 700°C coiling temperature and 65% cold reduction ratio, the plastic strain ratio r value and the strain hardening exponent n value were reached the maximum, and respectively, the r value was approximate 1.8, the n value was approximate 0.26. That obtains optimally match of high strength and punching property.


Sign in / Sign up

Export Citation Format

Share Document