Dynamic Aspects in Fracture Mechanisms

1986 ◽  
pp. 81-91 ◽  
Author(s):  
K. M. Mianowski
Keyword(s):  
Fracture Mechanisms

Experimental study of the strength and durability of metal-composite high-pressure tanks

2019 ◽  
Vol 85 (1(I)) ◽  
pp. 49-56 ◽  
Author(s):  
A. M. Lepikhin ◽  
V. V. Moskvichev ◽  
A. E. Burov ◽  
E. V. Aniskovich ◽  
A. P. Cherniaev ◽  
...  
Keyword(s):  
High Pressure ◽  
Strain State ◽  
Full Scale ◽  
Fracture Mechanisms ◽  
Metal Composite ◽  
Test Results ◽  
Stress Strain ◽  
Pneumatic Pressure ◽  
Stress Strain State ◽  
Composite Tank

The results of unique experimental studies of the strength and service life of a metal-composite high-pressure tank are presented. The goal of the study is to analyze the fracture mechanisms and evaluate the strength characteristics of the structure. The methodology included tests of full-scale samples of the tank for durability under short-term static, long-term static and cyclic loading with internal pneumatic pressure. Generalized test results and data of visual measurements, instrumental and acoustic-emission control of deformation processes, accumulation of damages and destruction of full-scale tank samples are presented. Analysis of the strength and stiffness of the structure exposed to internal pneumatic pressure is presented. The types of limiting states of the tanks have been established experimentally. Change in the stress-strain state of the tank under cyclic and prolonged static loading is considered. Specific features of the mechanisms of destruction of a metal-composite tank are determined taking into account the role of strain of the metal liner. The calculated and experimental estimates of the energy potential of destruction and the size of the area affected upon destruction of the tank are presented. Analysis of test results showed that the tank has high strength and resource characteristics that meet the requirements of the design documentation. The results of the experiments are in good agreement with the results of numerical calculations and analysis of the stress-strain state and mechanisms of destruction of the metal-composite tank.

scholarly journals Mechanical properties, deformation and fracture mechanisms of bimodal Cu under tensile test

2021 ◽  
Vol 60 (1) ◽  
pp. 15-24
Author(s):  
Silu Liu ◽  
Yonghao Zhao
Keyword(s):  
Yield Strength ◽  
Grain Refinement ◽  
Volume Fraction ◽  
Shear Fracture ◽  
High Strength ◽  
Tensile Specimen ◽  
Deformation Mechanisms ◽  
Fracture Mechanisms ◽  
Fracture Angle ◽  
Area Reduction

Abstract Metals with a bimodal grain size distribution have been found to have both high strength and good ductility. However, the coordinated deformation mechanisms underneath the ultrafine-grains (UFGs) and coarse grains (CGs) still remain undiscovered yet. In present work, a bimodal Cu with 80% volume fraction of recrystallized micro-grains was prepared by the annealing of equal-channel angular pressing (ECAP) processed ultrafine grained Cu at 473 K for 40 min. The bimodal Cu has an optimal strength-ductility combination (yield strength of 220 MPa and ductility of 34%), a larger shear fracture angle of 83∘ and a larger area reduction of 78% compared with the as-ECAPed UFG Cu (yield strength of 410 MPa, ductility of 16%, shear fracture angle of 70∘, area reduction of 69%). Grain refinement of recrystallized micro-grains and detwinning of annealing growth twins were observed in the fractured bimodal Cu tensile specimen. The underlying deformation mechanisms for grain refinement and detwinning were analyzed and discussed.

scholarly journals Effects of SiC Fibers and Laminated Structure on Mechanical Properties of Ti–Al Laminated Composites

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1323
Author(s):  
Chenyang Hou ◽  
Shouyin Zhang ◽  
Zhijian Ma ◽  
Baiping Lu ◽  
Zhenjun Wang
Keyword(s):  
Volume Fraction ◽  
Raw Materials ◽  
Laminated Composites ◽  
Intermetallic Layer ◽  
Longitudinal Direction ◽  
Fracture Mechanisms ◽  
Compact Structure ◽  
Laminated Structure ◽  
Sic Fibers ◽  
Sic Fiber

Ti/Ti–Al and SiCf-reinforced Ti/Ti–Al laminated composites were fabricated through vacuum hot-pressure using pure Ti foils, pure Al foils and SiC fibers as raw materials. The effects of SiC fiber and a laminated structure on the properties of Ti–Al laminated composites were studied. A novel method of fiber weaving was implemented to arrange the SiC fibers, which can guarantee the equal spacing of the fibers without introducing other elements. Results showed that with a higher exerted pressure, a more compact structure with fewer Kirkendall holes can be obtained in SiCf-reinforced Ti/Ti–Al laminated composites. The tensile strength along the longitudinal direction of fibers was about 400 ± 10 MPa, which was 60% higher compared with the fabricated Ti/Ti–Al laminated composites with the same volume fraction (60%) of the Ti layer. An in situ tensile test was adopted to observe the deformation behavior and fracture mechanisms of the SiCf-reinforced Ti/Ti–Al laminated composites. Results showed that microcracks first occurred in the Ti–Al intermetallic layer.

Experimental and numerical study on the relationship between creep crack growth properties and fracture mechanisms

2004 ◽  
Vol 35 (6) ◽  
Author(s):  
Masaaki Tabuchi ◽  
Jechang Ha ◽  
Hiromichi Hongo ◽  
Takashi Watanabe ◽  
Toshimitsu Yokobori
Keyword(s):  
Crack Growth ◽  
Numerical Study ◽  
Creep Crack Growth ◽  
Fracture Mechanisms ◽  
Creep Crack ◽  
Growth Properties ◽  
The Relationship

Fracture mechanisms under monotonic and non-monotonic low Lode angle loading

2014 ◽  
Vol 124-125 ◽  
pp. 121-141 ◽  
Author(s):  
J.-M. Gachet ◽  
G. Delattre ◽  
P.-O. Bouchard
Keyword(s):  
Fracture Mechanisms ◽  
Lode Angle
Sign in / Sign up

Export Citation Format

Share Document