Study on Productivity Improvement and Quality Control at a Smart Card Company Based on Six Sigma

2019 ◽  
pp. 578-588
Author(s):  
Yue Wu ◽  
Chao Xu ◽  
Chen-xi Li ◽  
Yi-jing Wan
Keyword(s):  
Quality Control ◽  
Smart Card ◽  
Six Sigma ◽  
Productivity Improvement

Perencanaan Pengendalian Kualitas Produk Pakaian Bayi dengan Metode Six Sigma Pada CV. AGP

JEMAP ◽  
2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Albertus Reynaldo Kurniawan ◽  
Bayu Prestianto
Keyword(s):  
Quality Control ◽  
Continuous Improvement ◽  
Six Sigma ◽  
Screen Printing ◽  
Control Method ◽  
Operational Performance ◽  
Machine Maintenance ◽  
Quality Product ◽  
Break Time ◽  
And Control

Quality control becomes an important key for companies in suppressing the number of defective produced products. Six Sigma is a quality control method that aims to minimize defective products to the lowest point or achieve operational performance with a sigma value of 6 with only yielding 3.4 defective products of 1 million product. Stages of Six Sigma method starts from the DMAIC (Define, Measure, Analyze, Improve and Control) stages that help the company in improving quality and continuous improvement. Based on the results of research on baby clothes products, data in March 2018 the percentage of defective products produced reached 1.4% exceeding 1% tolerance limit, with a Sigma value of 4.14 meaning a possible defect product of 4033.39 opportunities per million products. In the pareto diagram there were 5 types of CTQ (Critical to Quality) such as oblique obras, blobor screen printing, there is a fabric / head cloth code on the final product, hollow fabric / thin fabric fiber, and dirty cloth. The factors caused quality problems such as Manpower, Materials, Environtment, and Machine. Suggestion for consideration of company improvement was continuous improvement on every existing quality problem like in Manpower factor namely improving comprehension, awareness of employees in producing quality product and improve employee's accuracy, Strength Quality Control and give break time. Materials by making the method of cutting the fabric head, the Machine by scheduling machine maintenance and the provision of needle containers at each employees desk sewing and better environtment by installing exhaust fan and renovating the production room.

Studi Kualitas Puding Melalui Pendekatan Six Sigma Studi Kasus Di Pt. Keong Nusantara Abadi

2019 ◽  
Vol 1 (1) ◽  
pp. 44
Author(s):  
Rony Trizudha ◽  
Sri Rahayuningsih ◽  
Ana Komari
Keyword(s):  
Quality Control ◽  
Quality Improvement ◽  
Production Process ◽  
Product Quality ◽  
Six Sigma ◽  
Improve Quality ◽  
High Productivity ◽  
Fierce Competition ◽  
And Control ◽  
Technology Advances

As technology advances at this time, players in business are aware of the importance of product quality in the increasingly fierce competition in the industrial world due to the emergence of many similar companies. Therefore, companies must be able to compete to meet customer desires and try to retain customers. To maintain customers and their marketing areas, companies must have high competitiveness in order to survive by prioritizing quality improvement, increasing efficiency and increasing productivity to improve quality because by increasing quality, products can be accepted among consumers so that company goals can be fulfilled. Therefore, the company must carry out effective quality control which will result in high productivity, lower overall cost of making goods and the factors that cause production failure to be minimized. To improve quality, use the six sigma method, DMAIC and seven tools so that it can be known the cause of the damage and what actions are taken so that there needs to be a controversy to stabilize the processes of the production process so that we can know what percentage of damage and what factors cause damage, therefore there must be measurements and recommendations for improvement and control to reduce the causes From the analysis, it was found that the dent cup was 20.36%, the lid was 21.36% less dense, the lid was damaged in the finished product 18.72%, the cup was 19.28% less thick, the packaging was flexible 20.55%Seiring kemajuan teknologi pada saat ini pelaku di bisnis menyadari akan pentingnya kualitas produk dalam persaingan dunia industri yang semakin ketat karena banyak bermunculan perusahaan-perusahaan sejenis. Oleh sebab itu perusahaan harus dapat bersaing untuk memenuhi keinginan  pelanggan dan berusaha dapat mempertahankan pelanggan. Untuk mempertahankan pelangan dan wilayah pemasaranya perusahaan-perusahaan harus mempunyai daya saing yang tinggi untuk dapat bertahan dengan mengutamakan peningkatan mutu, peningkatan efisiensi dan peningkatan produktivitas untuk meningkatkan kualitas karena dengan peningkatan kualitas, produk dapat diterima di kalangan konsumen sehingga tujuan perusahaan dapat terpenuhi. Maka dari itu perusahaan harus melakukan pengendalian kualitas yang efektif akan menghasilkan produktivitas yang tinggi, biaya pembuatan barang keseluruhan yang lebih  rendah serta  faktor-faktor yang menyebabkan kegagalan produksi akan dapat ditekan sekecil mungkin. Untuk meningkatkan kualitas mengunakan metode six sigma, DMAIC dan seven tools agar dapat diketahui penyebab  kerusakan  dan  tindakan  apa  saja  yang dilakukan sehingga perlu ada kontror untuk menstabilkan  peoses proses produksi sehinga dapat di ketahui berapa persen  kerusakan dan faktor-faktor apa saja yang menyebabkan  kerusakan maka dari itu harus ada pengukuran dan  rekomendasi perbaikan serta melakukan kontrol untuk mengurangi penyebab kerusakan. Dari hasil analisis  di ketahui cup  penyok 20,36%, lid kurang  rapat  21,36%, lid  rusak  pada produk jadi 18,72%,cup kurang tebal 19,28 %kemasan lentur 20,55%

Perbaikan Kualitas Produk Batu Bata Merah Dengan Metode Six Sigma-Dmaic (Studi Kasus Cv. Ghatan Fatahillah Karawang)

UNISTEK ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 6-10
Author(s):  
Egar Naufal Ari Satya ◽  
Wahyudin Wahyudin
Keyword(s):  
Quality Control ◽  
Customer Satisfaction ◽  
Six Sigma ◽  
Quality Standards ◽  
Research Results ◽  
Machine Performance ◽  
Fishbone Diagram ◽  
And Control ◽  
Dmaic Method

Abstrak. Dunia industri yang semakin berkembang akan mengakibatkan banyaknya persaingan. Perus-ahaan yang dapat bersaing adalah perusahaan yang dapat menjaga  kualitas produknya dengan baik sehingga dapat memenuhi kepuasan konsumen. Maka dari itu diperlukan pengendalian kualitas. Penelitian ini difokuskan pada penurunan cacat pada produk batu bata merah di CV. Ghatan Fatahillah dengan metode Six Sigma-DMAIC (Define, Measure, Analyze, Improve, dan Control). Dari hasil penelitian didapatkan DPMO sebesar 36.212 dengan nilai sigma 3,29. Jenis cacat yang paling sering terjadi pada batu bata merah yaitu pecah/patah yaitu sebesar 4.327 atau 59,81% dari total keseluruhan produk yang cacat.  Hasil dari tahap analyze dengan fishbone diagram, ditetapkan penyebab dari pecah/cacat, yaitu: pekerja kurang paham standar kualitas, tidak adanya pemeriksaan produk, pekerja kurang paham prosedur kerja, kinerja mesin tidak stabil, pekerja kurang teliti,  jumlah penggilingan tidak menentu, dan komposisi batu bata tidak menentu. Maka perlu dilakukan usulan perbaikan agar dapat mengurangi jumlah produk yang cacat pada batu bata merah. Kata kunci: DMAIC, DPMO, Pengendalian Kualitas, Six Sigma Abstract. The growing industrial world will result in a lot of competition. Companies that can compete are companies that can maintain the quality of their products well so that they can meet customer satisfaction. Therefore, quality control is needed. This research is focused on reducing defects in red brick products at CV. Ghatan Fatahillah with the Six Sigma-DMAIC method (Define, Measure, Analyze, Improve, and Control). From the research results obtained DPMO of 36,212 with a sigma value of 3.29. The type of defect that most often occurs in red bricks is broken / broken, which is 4,327 or 59.81% of the total defective products. The results of the Analyze stage with the fishbone diagram showed that the causes of breakage / defects were determined, namely: workers do not understand quality standards, lack of product inspection, workers do not understand work procedures, unstable machine performance, workers are not careful, the number of mills is erratic, and composition erratic bricks. So it is necessary to make improvement proposals in order to reduce the number of defective products in red bricks. Keywords: DMAIC, DPMO, Quality Control, Six Sigma

scholarly journals ANALISIS KECACATAN KEMASAN PRODUK OKKY JELLY DRINK PERISA BLACKCURRANT SEBAGAI UPAYA PERBAIKAN KUALITAS DENGAN METODE DMAIC PADA PT. TRITEGUH MANUNGGAL SEJATI

2019 ◽  
Vol 3 (1) ◽  
Author(s):  
Suharto Suharto ◽  
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Six Sigma ◽  
Cause And Effect ◽  
Sigma Level ◽  
Quality Control Tool ◽  
And Control ◽  
Cause And Effect Diagram ◽  
Control Tool

Abstract This study aims to determine and identify the causes of defects in the production process of PT. Triteguh Manunggal Sejati and know the level of sigma level. This research uses the six sigma method with the DMAIC approach as a quality control tool, which includes the Define, Measure, Analyze, Improve and Control stages. Based on this study the results obtained are the level of sigma level at PT.Triteguh Manunggal Sejati is 4.96, which means that in the stage of sigma level the company has not reached the level of six sigma levels because in the production process at PT.Triteguh Manunggal Sejati still has product defects in the production process not yet achieved zero defect. The causes of product defects are based on cause and effect diagrams namely lid / seal defects are leaky lid, broken lid, and tilted lid. Kata kunci : Defect, Six Sigma, DMAIC, cause and effect diagram

scholarly journals Pengendalian Kualitas Proses Pengemasan Gula Dengan Pendekatan Six Sigma

2017 ◽  
Vol 1 (1) ◽  
pp. 43
Author(s):  
Aulia Kusumawati ◽  
Lailatul Fitriyeni
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Six Sigma ◽  
Control Method ◽  
Business Success ◽  
Company Performance ◽  
Jet Engine ◽  
Corporate Goals ◽  
And Control ◽  
Main Factor

The main factor to achieve business success in the era of globalization is quality. Quality control is key in maintaining customer loyalty. In the company's production process is still found the resulting product does not comply with the specified specifications. This study aims to determine the value of sigma and factors causing damage to the production process of bagging section For companies with quality control is expected to achieve corporate goals. In this study, the methods used is Six Sigma with define, measure, analyze, improve. Six Sigma result is measurement of company performance baseline at measurement stage that is company at condition 5,1 sigma with DPMO equal to 162,4532. The factors causing the disability of sugar packing are lack of research and skill of the operator, instability of conveyor speeds and jet engine position, machine hygiene condition, lack of weighing machine, and ineffective treatment, and control method.

scholarly journals Application of Sigma Metrics for Evaluating the Analytical Performance of Thyroid Profile and Cortisol in Clinical Biochemistry Laboratory

2020 ◽  
Author(s):  
Smita Natvarbhai Vasava ◽  
Roshni Gokaldas Sadaria
Keyword(s):  
Quality Control ◽  
Six Sigma ◽  
Clinical Laboratory ◽  
Clinical Biochemistry ◽  
Poor Performance ◽  
Analytical Performance ◽  
Internal Quality ◽  
Six Sigma Methodology ◽  
Clinical Biochemistry Laboratory ◽  
Thyroid Profile

Introduction: Now-a-days quality is the key aspect of clinical laboratory services. The six sigma metrics is an important quality measurement method for evaluating the performance of the clinical laboratory. Aim: To assess the analytical performance of clinical biochemistry laboratory by utilising thyroid profile and cortisol parameters from Internal Quality Control (IQC) data and to calculate sigma values. Materials and Methods: Study was conducted at Clinical Biochemistry Laboratory, Dhiraj General Hospital, Piparia, Gujarat, India. Retrospectively, IQC data of thyroid profile and cortisol were utilised for six subsequent months (July to December 2019). Coefficient of Variation (CV%) and bias were calculated from IQC data, from that the sigma values were calculated. The sigma values <3, >3 and >6 were indicated by poor performance procedure, good performance and world class performance, respectively. Results: The sigma values were estimated by calculating mean of six months. The mean sigma value of Thyroid Stimulating Hormone (TSH) and Cortisol were >3 for six months which indicated the good performance. However, sigma value of Triiodothyronine (T3), Tetraiodothyronine (T4) were found to be <3 which indicated poor performance. Conclusion: Six sigma methodology applications for thyroid profile and cortisol was evaluated, it was generally found as good. While T3 and T4 parameters showed low sigma values which requires detailed root cause analysis of analytical process. With the help of six sigma methodology, in clinical biochemistry laboratories, an appropriate Quality Control (QC) programming should be done for each parameter. To maintain six sigma levels is challenging to quality management personnel of laboratory, but it will be helpful to improve quality level in the clinical laboratories.

Sign in / Sign up

Export Citation Format

Share Document