scholarly journals Pengendalian Kualitas Proses Pengemasan Gula Dengan Pendekatan Six Sigma

2017 ◽  
Vol 1 (1) ◽  
pp. 43
Author(s):  
Aulia Kusumawati ◽  
Lailatul Fitriyeni
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Six Sigma ◽  
Control Method ◽  
Business Success ◽  
Company Performance ◽  
Jet Engine ◽  
Corporate Goals ◽  
And Control ◽  
Main Factor

The main factor to achieve business success in the era of globalization is quality. Quality control is key in maintaining customer loyalty. In the company's production process is still found the resulting product does not comply with the specified specifications. This study aims to determine the value of sigma and factors causing damage to the production process of bagging section For companies with quality control is expected to achieve corporate goals. In this study, the methods used is Six Sigma with define, measure, analyze, improve. Six Sigma result is measurement of company performance baseline at measurement stage that is company at condition 5,1 sigma with DPMO equal to 162,4532. The factors causing the disability of sugar packing are lack of research and skill of the operator, instability of conveyor speeds and jet engine position, machine hygiene condition, lack of weighing machine, and ineffective treatment, and control method.

Perencanaan Pengendalian Kualitas Produk Pakaian Bayi dengan Metode Six Sigma Pada CV. AGP

JEMAP ◽  
2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Albertus Reynaldo Kurniawan ◽  
Bayu Prestianto
Keyword(s):  
Quality Control ◽  
Continuous Improvement ◽  
Six Sigma ◽  
Screen Printing ◽  
Control Method ◽  
Operational Performance ◽  
Machine Maintenance ◽  
Quality Product ◽  
Break Time ◽  
And Control

Quality control becomes an important key for companies in suppressing the number of defective produced products. Six Sigma is a quality control method that aims to minimize defective products to the lowest point or achieve operational performance with a sigma value of 6 with only yielding 3.4 defective products of 1 million product. Stages of Six Sigma method starts from the DMAIC (Define, Measure, Analyze, Improve and Control) stages that help the company in improving quality and continuous improvement. Based on the results of research on baby clothes products, data in March 2018 the percentage of defective products produced reached 1.4% exceeding 1% tolerance limit, with a Sigma value of 4.14 meaning a possible defect product of 4033.39 opportunities per million products. In the pareto diagram there were 5 types of CTQ (Critical to Quality) such as oblique obras, blobor screen printing, there is a fabric / head cloth code on the final product, hollow fabric / thin fabric fiber, and dirty cloth. The factors caused quality problems such as Manpower, Materials, Environtment, and Machine. Suggestion for consideration of company improvement was continuous improvement on every existing quality problem like in Manpower factor namely improving comprehension, awareness of employees in producing quality product and improve employee's accuracy, Strength Quality Control and give break time. Materials by making the method of cutting the fabric head, the Machine by scheduling machine maintenance and the provision of needle containers at each employees desk sewing and better environtment by installing exhaust fan and renovating the production room.

Studi Kualitas Puding Melalui Pendekatan Six Sigma Studi Kasus Di Pt. Keong Nusantara Abadi

2019 ◽  
Vol 1 (1) ◽  
pp. 44
Author(s):  
Rony Trizudha ◽  
Sri Rahayuningsih ◽  
Ana Komari
Keyword(s):  
Quality Control ◽  
Quality Improvement ◽  
Production Process ◽  
Product Quality ◽  
Six Sigma ◽  
Improve Quality ◽  
High Productivity ◽  
Fierce Competition ◽  
And Control ◽  
Technology Advances

As technology advances at this time, players in business are aware of the importance of product quality in the increasingly fierce competition in the industrial world due to the emergence of many similar companies. Therefore, companies must be able to compete to meet customer desires and try to retain customers. To maintain customers and their marketing areas, companies must have high competitiveness in order to survive by prioritizing quality improvement, increasing efficiency and increasing productivity to improve quality because by increasing quality, products can be accepted among consumers so that company goals can be fulfilled. Therefore, the company must carry out effective quality control which will result in high productivity, lower overall cost of making goods and the factors that cause production failure to be minimized. To improve quality, use the six sigma method, DMAIC and seven tools so that it can be known the cause of the damage and what actions are taken so that there needs to be a controversy to stabilize the processes of the production process so that we can know what percentage of damage and what factors cause damage, therefore there must be measurements and recommendations for improvement and control to reduce the causes From the analysis, it was found that the dent cup was 20.36%, the lid was 21.36% less dense, the lid was damaged in the finished product 18.72%, the cup was 19.28% less thick, the packaging was flexible 20.55%Seiring kemajuan teknologi pada saat ini pelaku di bisnis menyadari akan pentingnya kualitas produk dalam persaingan dunia industri yang semakin ketat karena banyak bermunculan perusahaan-perusahaan sejenis. Oleh sebab itu perusahaan harus dapat bersaing untuk memenuhi keinginan  pelanggan dan berusaha dapat mempertahankan pelanggan. Untuk mempertahankan pelangan dan wilayah pemasaranya perusahaan-perusahaan harus mempunyai daya saing yang tinggi untuk dapat bertahan dengan mengutamakan peningkatan mutu, peningkatan efisiensi dan peningkatan produktivitas untuk meningkatkan kualitas karena dengan peningkatan kualitas, produk dapat diterima di kalangan konsumen sehingga tujuan perusahaan dapat terpenuhi. Maka dari itu perusahaan harus melakukan pengendalian kualitas yang efektif akan menghasilkan produktivitas yang tinggi, biaya pembuatan barang keseluruhan yang lebih  rendah serta  faktor-faktor yang menyebabkan kegagalan produksi akan dapat ditekan sekecil mungkin. Untuk meningkatkan kualitas mengunakan metode six sigma, DMAIC dan seven tools agar dapat diketahui penyebab  kerusakan  dan  tindakan  apa  saja  yang dilakukan sehingga perlu ada kontror untuk menstabilkan  peoses proses produksi sehinga dapat di ketahui berapa persen  kerusakan dan faktor-faktor apa saja yang menyebabkan  kerusakan maka dari itu harus ada pengukuran dan  rekomendasi perbaikan serta melakukan kontrol untuk mengurangi penyebab kerusakan. Dari hasil analisis  di ketahui cup  penyok 20,36%, lid kurang  rapat  21,36%, lid  rusak  pada produk jadi 18,72%,cup kurang tebal 19,28 %kemasan lentur 20,55%

scholarly journals ANALISIS KECACATAN KEMASAN PRODUK OKKY JELLY DRINK PERISA BLACKCURRANT SEBAGAI UPAYA PERBAIKAN KUALITAS DENGAN METODE DMAIC PADA PT. TRITEGUH MANUNGGAL SEJATI

2019 ◽  
Vol 3 (1) ◽  
Author(s):  
Suharto Suharto ◽  
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Six Sigma ◽  
Cause And Effect ◽  
Sigma Level ◽  
Quality Control Tool ◽  
And Control ◽  
Cause And Effect Diagram ◽  
Control Tool

Abstract This study aims to determine and identify the causes of defects in the production process of PT. Triteguh Manunggal Sejati and know the level of sigma level. This research uses the six sigma method with the DMAIC approach as a quality control tool, which includes the Define, Measure, Analyze, Improve and Control stages. Based on this study the results obtained are the level of sigma level at PT.Triteguh Manunggal Sejati is 4.96, which means that in the stage of sigma level the company has not reached the level of six sigma levels because in the production process at PT.Triteguh Manunggal Sejati still has product defects in the production process not yet achieved zero defect. The causes of product defects are based on cause and effect diagrams namely lid / seal defects are leaky lid, broken lid, and tilted lid. Kata kunci : Defect, Six Sigma, DMAIC, cause and effect diagram

scholarly journals Analysis of quality control in efforts to reduce the level of product defects at PT. MAG

2020 ◽  
Vol 8 ◽  
pp. 428-436
Author(s):  
Isna Zulfa Azmi ◽  
Oktora Yogi Sari
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Product Quality ◽  
Six Sigma ◽  
Raw Materials ◽  
Analysis Tool ◽  
Factors Affecting ◽  
And Control ◽  
Dmaic Method

The increasing number of bag factories throughout Indonesia that have well-known brands and every manufacturer is required to provide products of good quality. Poor product quality will cause consumers to move to other similar products. So in the production of bags, the thing that must be considered by the company is the quality of its products. In this study the authors aim to analyze quality control in a production process and identify several factors that cause disability in the product, PT. MAG is a bag company that is demanded to control the quality of the production process. This study uses a six sigma analysis tool consisting of five steps, namely using the DMAIC method (Define, Measure, Analyze, Improve, and Control). Based on the results of the study there are three types of disabilities in the production process, including cutting, zippers and broken bag straps with an average sigma value of 2.48 with a DPMO value of 20256.92. Factors affecting the production process are human, machine, environment, equipment, raw materials, and methods. In this case the company can use the Six Sigma method because it is still in the medium category.

Perbaikan Kualitas Produk Batu Bata Merah Dengan Metode Six Sigma-Dmaic (Studi Kasus Cv. Ghatan Fatahillah Karawang)

UNISTEK ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 6-10
Author(s):  
Egar Naufal Ari Satya ◽  
Wahyudin Wahyudin
Keyword(s):  
Quality Control ◽  
Customer Satisfaction ◽  
Six Sigma ◽  
Quality Standards ◽  
Research Results ◽  
Machine Performance ◽  
Fishbone Diagram ◽  
And Control ◽  
Dmaic Method

Abstrak. Dunia industri yang semakin berkembang akan mengakibatkan banyaknya persaingan. Perus-ahaan yang dapat bersaing adalah perusahaan yang dapat menjaga  kualitas produknya dengan baik sehingga dapat memenuhi kepuasan konsumen. Maka dari itu diperlukan pengendalian kualitas. Penelitian ini difokuskan pada penurunan cacat pada produk batu bata merah di CV. Ghatan Fatahillah dengan metode Six Sigma-DMAIC (Define, Measure, Analyze, Improve, dan Control). Dari hasil penelitian didapatkan DPMO sebesar 36.212 dengan nilai sigma 3,29. Jenis cacat yang paling sering terjadi pada batu bata merah yaitu pecah/patah yaitu sebesar 4.327 atau 59,81% dari total keseluruhan produk yang cacat.  Hasil dari tahap analyze dengan fishbone diagram, ditetapkan penyebab dari pecah/cacat, yaitu: pekerja kurang paham standar kualitas, tidak adanya pemeriksaan produk, pekerja kurang paham prosedur kerja, kinerja mesin tidak stabil, pekerja kurang teliti,  jumlah penggilingan tidak menentu, dan komposisi batu bata tidak menentu. Maka perlu dilakukan usulan perbaikan agar dapat mengurangi jumlah produk yang cacat pada batu bata merah. Kata kunci: DMAIC, DPMO, Pengendalian Kualitas, Six Sigma Abstract. The growing industrial world will result in a lot of competition. Companies that can compete are companies that can maintain the quality of their products well so that they can meet customer satisfaction. Therefore, quality control is needed. This research is focused on reducing defects in red brick products at CV. Ghatan Fatahillah with the Six Sigma-DMAIC method (Define, Measure, Analyze, Improve, and Control). From the research results obtained DPMO of 36,212 with a sigma value of 3.29. The type of defect that most often occurs in red bricks is broken / broken, which is 4,327 or 59.81% of the total defective products. The results of the Analyze stage with the fishbone diagram showed that the causes of breakage / defects were determined, namely: workers do not understand quality standards, lack of product inspection, workers do not understand work procedures, unstable machine performance, workers are not careful, the number of mills is erratic, and composition erratic bricks. So it is necessary to make improvement proposals in order to reduce the number of defective products in red bricks. Keywords: DMAIC, DPMO, Quality Control, Six Sigma

scholarly journals A Framework of Cloud Model Similarity-Based Quality Control Method in Data-Driven Production Process

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Sheng Hu ◽  
Shuanjun Song ◽  
Wenhui Liu
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Control Method ◽  
Cloud Model ◽  
Data Driven ◽  
Monitoring Method ◽  
Control Approach ◽  
Acceptable Method ◽  
And Performance ◽  
Model Similarity

Considering the problem that the process quality state is difficult to analyze and monitor under manufacturing big data, this paper proposed a data cloud model similarity-based quality fluctuation monitoring method in data-driven production process. Firstly, the randomness of state fluctuation is characterized by entropy and hyperentropy features. Then, the cloud pool drive model between quality fluctuation monitoring parameters is built. On this basis, cloud model similarity degree from the perspective of maximum fluctuation border is defined and calculated to realize the process state analysis and monitoring. Finally, the experiment is conducted to verify the adaptability and performance of the cloud model similarity-based quality control approach, and the results indicate that the proposed approach is a feasible and acceptable method to solve the process fluctuation monitoring and quality stability analysis in the production process.

scholarly journals QUALITY IMPROVEMENT ON CERAMIC TILES PROUCTION PROCESS WITH SIX SIGMA METHOD (DMAIC) AT PT ARWANA CITRAMULIA

2018 ◽  
Vol 3 (2) ◽  
pp. 101
Author(s):  
Priskila Christine Rahayu ◽  
Vanesa Darvin
Keyword(s):  
Quality Improvement ◽  
Production Process ◽  
Six Sigma ◽  
Ceramic Tiles ◽  
Control Approach ◽  
Sigma Level ◽  
And Control

This study focused on quality improvement on ceramic tiles production process at PT Arwana Citramulia. This study used data defects for 12 months (May 2016 – April 2017) and only focus on one type of defect and it is chop corner. Six sigma with DMAIC (define, measure, analyze, improve, and control) approach was used to improve the process. Each step of DMAIC was conducted to carefully analyze and keep the process precisely. The ceramic tiles production process contains a number of 4375 products defects in million opportunities (DPMO), with sigma level of 4.13. In the improve step of DMAIC, FMEA form was used to propose some recommendations in order to improve the process, some of that that are provision of lubricant periodically by the operator, polishing on the surface of the liner to clean and clear, examination and maintenance periodically. Keyword : Quality, Six Sigma, DMAIC, Defects.

scholarly journals ANALISIS SISTEM PENGAWASAN KUALITAS PRODUK PADA PT INDUSTRI SANDANG NUSANTARA UNIT PATAL SECANG DI MAGELANG JAWA TENGAH

2014 ◽  
Vol 5 (2) ◽  
Author(s):  
Listiani Listiani
Keyword(s):  
Quality Control ◽  
Control System ◽  
Production Process ◽  
Raw Materials ◽  
Employee Performance ◽  
Fish Bone ◽  
Quality Control System ◽  
Observation Data ◽  
And Control

This research is aimed to determine the quality control system of production process in PT Industri Sandang Nusantara unit Patal Secang, measure the efectivity of quality control system by using control P-Chart and determine factors that cause defect product. This research is explorative descriptive by case study method. Data used in this research is the procedure of production process and the number of defect product. Product used in this company is  thread R30/1 UW and R 40/1 UW PT Industri Sandang Nusantara Unit Patal Secang in 24 periods of production between April – Mei 2006. Data is collected by interview, documentation, and observation. Data is analyzed by control p-chart and fish bone diagram. The conclusion of this research are: (1) The quality control system which is consists of controlling raw materials, production process and final product is appropriate with the company’s standard; (2) the number of defect product R 30/1 UW is 26.956 bale with the average 0.0167; Control P Chart shows that there are three periods which are out of control. They are in April 30, Mei 5 and 21, 2006. (3) The number of final product R 40/1 UW is 2159 bale with the average 0.0214; control p-chart shows that there are tw periods which are out of control. They are ini Mei 6 and Mei 12, 2006. (4) Factors that cause defect product are obsolete machines, employee performance, control system, and raw materials. Based on that condition, management should impove the controlling of machines, improve motivation and commitment of the employee, improve the method of inspection and control the quality of raw materials.

scholarly journals Usulan Penurunan Tingkat Kecacatan Produk Pelat Baja dengan Metode Six Sigma

2017 ◽  
Vol 3 (2) ◽  
pp. 41
Author(s):  
Muhamad Bob Anthony
Keyword(s):  
Production Process ◽  
Six Sigma ◽  
Standard Operating Procedures ◽  
Maintenance Scheduling ◽  
Sigma Level ◽  
Standard Operating ◽  
Main Factors ◽  
And Control ◽  
Developing Knowledge

This study aims to maximize the decline in the level of product defects to lead to zero defects. Researchers use the six sigma method through 5 stages of completion, namely, define, measure, analyze, improve, and control. Based on the results of the study it can be concluded that the sigma level and the value of DPMO (Defect per Million Opportunities) of the company amounted to 3.47 with possible damage of 24,239 sheets for one million productions. After further analysis using the Pareto diagram, it found that the cutting fault transfer defect was the most common with a percentage of damage of 43%. And based on the results of the analysis of fishbone diagrams, it can be seen that the main factors causing contamination in the production process come from the worker factor (human), followed by machine factors, material, and work methods. The proposed improvements that can be made by the company include updating existing methods and SOPs (standard operating procedures) and monitoring the operator's performance and developing knowledge and planning proper maintenance scheduling.

scholarly journals PENERAPAN METODE SIX SIGMA DALAM ANALISIS KUALITAS PRODUK (Studi Kasus Produk Batik Handprint Pada PT XYZ di Bali)

2017 ◽  
Vol 6 (2) ◽  
pp. 124
Author(s):  
TRI ALIT TRESNA PUTRA ◽  
I KOMANG GDE SUKARSA ◽  
I GUSTI AYU MADE SRINADI
Keyword(s):  
Quality Control ◽  
Production Process ◽  
Six Sigma ◽  
Production Quality ◽  
Improve Production ◽  
Defect Rate ◽  
Improve Production Quality

The aim of this study was to demonstrate the application of Statistics Quality Control in fierce industries. By observing Batik production process at PT XYZ as a case in this work, we applied Six Sigma Method to analyze defective product and their cause while also measure overall quality goodness. Six Sigma is a method to improve a process and reduce defects in productions into 3.4 defects per million productions. We use handprint batik productions at PT XYZ as a case in this study. The method is involving Define, Measure and Analyze (DMA) phases. By using Six Sigma, it was obtained that the quality of handprint batik are quite good with sigma of 3.105 and defect rate of 54.269 million production (DPMO). There are four defect causes of handprint batik namely: ripped fabric, shallowness, perforation, and mispattern which contribute 41,7%, 35,8%, 15%, 7,5% respectively from overall defects. The main cause of defects is the carelessness of workers in production process. Therefore we need to reduce the carelessness to  improve production quality.

Sign in / Sign up

Export Citation Format

Share Document