High-resolution scanning electron microscopy for the characterization of supported metal catalysts

Since several species of Schistosoma, or blood fluke, parasitize man, these trematodes have been subjected to extensive study. Light microscopy and conventional electron microscopy have yielded much information about the morphology of the various stages; however, scanning electron microscopy has been little utilized for this purpose. As the figures demonstrate, scanning microscopy is particularly helpful in studying at high resolution characteristics of surface structure, which are important in determining host-parasite relationships.

Download Full-text

High Resolution Scanning Electron Microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100086696 ◽

1991 ◽

Vol 49 ◽

pp. 478-479

Author(s):

David Joy ◽

James Pawley

Keyword(s):

Electron Microscopy ◽

Scanning Electron Microscopy ◽

Electron Beam ◽

Electron Microscope ◽

High Resolution ◽

Scanning Electron Microscope ◽

Electron Probe ◽

Impact Point ◽

Interaction Volume ◽

Scanning Electron

The scanning electron microscope (SEM) builds up an image by sampling contiguous sub-volumes near the surface of the specimen. A fine electron beam selectively excites each sub-volume and then the intensity of some resulting signal is measured. The spatial resolution of images made using such a process is limited by at least three factors. Two of these determine the size of the interaction volume: the size of the electron probe and the extent to which detectable signal is excited from locations remote from the beam impact point. A third limitation emerges from the fact that the probing beam is composed of a finite number of discrete particles and therefore that the accuracy with which any detectable signal can be measured is limited by Poisson statistics applied to this number (or to the number of events actually detected if this is smaller).

Download Full-text

Scanning Electron Microscopy and x-ray analysis of microparticles and early hydration effects

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100139834 ◽

1995 ◽

Vol 53 ◽

pp. 692-693

Author(s):

Yun Lu ◽

David C. Joy

Keyword(s):

Electron Microscopy ◽

Scanning Electron Microscopy ◽

High Resolution ◽

Morphological Development ◽

Early Hydration ◽

X Ray ◽

Blended Cements ◽

Powder Particles ◽

Chemical Wastes ◽

Scanning Electron

High resolution scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA) were performed to investigate microparticles in blended cements and their hydration products containing sodium-rich chemical wastes. The physical appearance of powder particles and the morphological development at different hydration stages were characterized by using high resolution SEM Hitachi S-900 and by SEM S-800 with a EDX spectrometer. Microparticles were dispersed on the sample holder and glued by 1% palomino solution. Hydrated bulk samples were dehydrated by acetone and mounted on the holder by silver paste. Both fracture surfaces and flat cutting sections of hydrating samples were prepared and examined. Some specimens were coated with an 3 nm thick Au-Pd or Cr layer to provide good conducting surfaces. For high resolution SEM S-900 observations the accelerating voltage of electrons was 1-2 KeV to protect the electron charging. Microchemical analyses were carried out by S800/EDS equipped with a LINK detector of take-off angle =40°.

Download Full-text