Scanning electron microscopy of oriented high density polyethylene

1981 ◽  
Vol 259 (2) ◽  
pp. 252-259 ◽  
Author(s):  
A. J. Owen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Density Polyethylene ◽  
High Density ◽  
Scanning Electron

Effect of inorganic nanofillers on the impact behavior and fracture probability of industrial high-density polyethylene nanocomposite

2017 ◽  
Vol 52 (18) ◽  
pp. 2431-2442 ◽  
Author(s):  
Harun Sepet ◽  
Necmettin Tarakcioglu ◽  
RDK Misra
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Density Polyethylene ◽  
Fracture Probability ◽  
High Density ◽  
Impact Behavior ◽  
Inorganic Filler ◽  
Melt Mixing ◽  
The Impact ◽  
Scanning Electron

The main purpose of this work is to study how the morphology of nanofillers and dispersion and distribution level of inorganic nanofiller influence the impact behavior and fracture probability of inorganic filler filled industrial high-density polyethylene nanocomposites. For this study, nanoclay and nano-CaCO3 fillers–high-density polyethylene mixings (0, 1, 3, 5 wt.% high-density polyethylene) was prepared by melt-mixing method using a compounder system. The impact behavior was examined by charpy impact test, scanning electron microscopy, and probability theory and statistics. The level of the dispersion was characterized with scanning electron microscopy energy dispersive X-ray spectroscopy analysis. The results showed rather good dispersion of both of inorganic nanofiller, with a mixture of exfoliated and confined morphology. The results indicated that the impact strength of the industrial nanocomposite decreased with the increase of inorganic particulate content. The impact reliability of the industrial nanocomposites depends on the type of nanofillers and their dispersion and distribution in the matrix.

Tensile and flammability characterizations of corn straw slagging/high-density polyethylene composites

2019 ◽  
Vol 33 (11) ◽  
pp. 1466-1477
Author(s):  
Qingfa Zhang ◽  
Wenyu Lu ◽  
Liang Zhou ◽  
Donghong Zhang ◽  
Hongzhen Cai ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Tensile Strength ◽  
Flame Retardant ◽  
High Density Polyethylene ◽  
Oxygen Index ◽  
High Density ◽  
Corn Straw ◽  
Scanning Calorimetry ◽  
Scanning Electron

Biocomposites were prepared with corn straw slagging (CSS) and high-density polyethylene (HDPE) at four loading levels (10, 20, 30, and 40 wt%) by extrusion method. CSS/HDPE composites were tested by tension, oxygen index meter, differential scanning calorimetry, X-ray diffraction, and the scanning electron microscopy. The scanning electron microscopy showed that CSS was dispersed uniformly in the HDPE matrix and strong interfacial interaction was achieved, which had an important influence on the tensile strength of the composites. The tensile strength of the composites could be improved with proper increase of CSS and reached maximum value at 30 wt% content. Furthermore, the addition of CSS played an important role in improving the flame-retardant ability of CSS/HDPE composites, and the limited oxygen index was 31.26% at 40 wt% content, good flame-retardant effect achieved.

The Study of Contamination and Coarsening in Sintering Silicon Powder

2012 ◽  
Vol 557-559 ◽  
pp. 1197-1200
Author(s):  
Jung Ting Tsai ◽  
Cheng Yu Han ◽  
Shung Tian Lin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Particle Size ◽  
Vapor Pressure ◽  
Crystalline Structure ◽  
Sintering Temperature ◽  
Silicon Powder ◽  
High Density ◽  
Heat Treated ◽  
Scanning Electron

The goal of this study was to investigate the sintering mechanism of Si powder, with the particle size of Si, sintering temperature, and sintering environment as the variables. The use of a crucible, by controlling the vapor atmosphere at certain temperatures, coarsened the silicon powder. Experiment of data show that by avoiding the vapor pressure of crucible a sintering at 1380°C causes the silicon powder easily to sinter to high density, without the use of any doping addition. Therefore it is to our advantage to discover the microstructure phenomenon of silicon powder and reveal its nature. The crystalline structure of the heat-treated samples was studied with Scanning electron microscopy (SEM) to explain the resultant of contamination that causes the densification.

Bio-Ethanol Lignin Waste/HDPE Composites: Preparation and Mechanical Properties

2010 ◽  
Vol 113-116 ◽  
pp. 606-609 ◽  
Author(s):  
Tian Liu ◽  
Qing Wen Wang
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
High Density Polyethylene ◽  
Lignin Content ◽  
Medium Density Fiberboard ◽  
Main Concern ◽  
Medium Density ◽  
Effective Utilization ◽  
Scanning Electron

The effective utilization of lignin waste has been a main concern in the bio-ethanol industry which uses straw and stalks as feedstock. In this study the lignin waste was incorporated into high density polyethylene (HDPE) to make composites by extruded pellet fabrication and thermoform process. With the increasing of the lignin content from 55% to 75%, the static flexural strength of the resulting composites was hardly influenced, but the tensile strength decreased 42%. Even though it was, the mechanical properties of lignin/HDPE composites were superior to those of traditional medium density fiberboard (MDF). Scanning electron microscopy showed that addition of 4% MAPE promoted the interfacial bonding between lignin and HDPE. Therefore, the macro performance also shows an improvement to mechanical properties.

scholarly journals Adsorption of natural dyes on clay fixed on polymers

2005 ◽  
Vol 48 (spe) ◽  
pp. 275-280 ◽  
Author(s):  
Toni Jefferson Lopes ◽  
Odinei Hess Gonçalves ◽  
Ricardo Barbosa Barros ◽  
Francine Carla Rodrigues Capelli ◽  
Ricardo Antonio Francisco Machado ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Density Polyethylene ◽  
External Surface ◽  
Sem Analysis ◽  
Adsorptive Capacity ◽  
Clay Particles ◽  
Polymeric Particles ◽  
Fixed Beds ◽  
Scanning Electron

The main purpose of this work was to produce a pellet to minimize undesirable effects in fixed beds, such as colmatation, through clay fixation on the surface of polymeric particles. Preliminary experiments were carried out by heating the clay, namely Tonsil Terrana 580FF, in order to observe variations on its capacity to adsorb anthocyanins derived from red cabbage. Clays was fixed on five samples of high density polyethylene (HDPE) at 180°C -210°C for two hours. The morphological analyses of the resulting particles were accomplished through Scanning Electron Microscopy (SEM). The experiments demonstrated an increase on clay's adsorptive capacity of 15.65% at 120°C for 30 hours and 16.80% at 170°C for two hours. The SEM analysis showed that the clay particles adhered on the external surface of the pellets .These results show that it is possible to obtain polymeric pellets using HDPE coated with clay.

Conjunctival tattoo with inadvertent ocular globe penetration and vitreous involvement: Clinico-pathological correlation and scanning electron microscopy X-ray microanalysis

2019 ◽  
Vol 30 (5) ◽  
pp. NP18-NP22 ◽  
Author(s):  
J Oswaldo Rodríguez-Avila ◽  
Dolores Ríos y Valles-Valles ◽  
Ivette Hernández-Ayuso ◽  
Abelardo A Rodríguez-Reyes ◽  
Virgilio Morales Cantón ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Anterior Chamber ◽  
Histopathological Examination ◽  
High Density ◽  
Vitreous Cavity ◽  
Bulbar Conjunctiva ◽  
X Ray ◽  
Pigment Granules ◽  
Scanning Electron

Purpose: The aim is to report a case of conjunctival tattooing with inadvertent injection of tattoo ink into the vitreous cavity and its consequences, the scanning electron microscopy X-ray microanalysis of the ink components, and the microscopic findings of the affected conjunctiva and vitreous. Methods: Descriptive case report. Results: A 32-year-old man complained of ocular pain and blurred vision after undergoing a subconjuctival red ink tattoo in his left eye. Ophthalmologic examination revealed best corrected visual acuity of 20/80 and intraocular pressure of 26 mmHg. Pain was elicited with eye movements. The bulbar conjunctiva was colored intense red. In the anterior chamber, pigment granules and filaments were suspended on the aqueous humor, and lens capsule was also stained red. Ultrasonography showed high-density non-mobile echoes in the conjunctiva; anterior chamber and vitreous cavity revealed high-density mobile echoes corresponding to pigment particles. Conjunctival tattoo with inadvertent globe penetration was the clinical diagnosis. The patient received medical and surgical treatment. Histopathological examination of the conjunctiva showed red pigment globular deposits within the stroma, and neutrophils and sparse histiocytes with similar intracytoplasmic pigment granules were seen. No granulomatous foreign body reaction was noticed. Vitreous material contained pigment granules; no inflammatory cells were observed. Scanning electron microscopy X-ray microanalysis of the tattoo red ink revealed significant signals of iron, barium, and copper. Conclusion: Conjunctival tattoo is a new form of body decoration gaining worldwide popularity. This procedure is performed by untrained professionals causing severe ocular complications including blindness. Safety regarding tattoo ink needs further study as the composition varies among colors. Strict regulations on this matter should be considered.

Pathogenesis of Human Hair Defects

1974 ◽  
Vol 32 ◽  
pp. 12-13
Author(s):  
P.S. Porter ◽  
T. Aoyagi ◽  
R. Matta
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Human Hair ◽  
Standard Techniques ◽  
Scanning Electron

Using standard techniques of scanning electron microscopy (SEM), over 1000 human hair defects have been studied. In several of the defects, the pathogenesis of the abnormality has been clarified using these techniques. It is the purpose of this paper to present several distinct morphologic abnormalities of hair and to discuss their pathogenesis as elucidated through techniques of scanning electron microscopy.

Ultrastructural Analysis of the Salivary Glands of Gromphadorhina Portentosa (Schaum)

1977 ◽  
Vol 35 ◽  
pp. 638-639
Author(s):  
P.J. Dailey
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Salivary Glands ◽  
Secretory Vesicles ◽  
The Past ◽  
Transmission Electron ◽  
Means Of Transmission ◽  
Gromphadorhina Portentosa ◽  
Scanning Electron ◽  
Topographical Relief

The structure of insect salivary glands has been extensively investigated during the past decade; however, none have attempted scanning electron microscopy (SEM) in ultrastructural examinations of these secretory organs. This study correlates fine structure by means of SEM cryofractography with that of thin-sectioned epoxy embedded material observed by means of transmission electron microscopy (TEM).Salivary glands of Gromphadorhina portentosa were excised and immediately submerged in cold (4°C) paraformaldehyde-glutaraldehyde fixative1 for 2 hr, washed and post-fixed in 1 per cent 0s04 in phosphosphate buffer (4°C for 2 hr). After ethanolic dehydration half of the samples were embedded in Epon 812 for TEM and half cryofractured and subsequently critical point dried for SEM. Dried specimens were mounted on aluminum stubs and coated with approximately 150 Å of gold in a cold sputtering apparatus.Figure 1 shows a cryofractured plane through a salivary acinus revealing topographical relief of secretory vesicles.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Spontaneous Cataract in Nude Athymic Mice

1977 ◽  
Vol 35 ◽  
pp. 512-513
Author(s):  
Ronald H. Bradley ◽  
R. S. Berk ◽  
L. D. Hazlett
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Nude Mouse ◽  
Cellular Immunity ◽  
Phosphate Buffer ◽  
Osmium Tetroxide ◽  
Athymic Mice ◽  
Transmission Microscopy ◽  
Mouse Lens ◽  
Scanning Electron

The nude mouse is a hairless mutant (homozygous for the mutation nude, nu/nu), which is born lacking a thymus and possesses a severe defect in cellular immunity. Spontaneous unilateral cataractous lesions were noted (during ocular examination using a stereomicroscope at 40X) in 14 of a series of 60 animals (20%). This transmission and scanning microscopic study characterizes the morphology of this cataract and contrasts these data with normal nude mouse lens.All animals were sacrificed by an ether overdose. Eyes were enucleated and immersed in a mixed fixative (1% osmium tetroxide and 6% glutaraldehyde in Sorenson's phosphate buffer pH 7.4 at 0-4°C) for 3 hours, dehydrated in graded ethanols and embedded in Epon-Araldite for transmission microscopy. Specimens for scanning electron microscopy were fixed similarly, dehydrated in graded ethanols, then to graded changes of Freon 113 and ethanol to 100% Freon 113 and critically point dried in a Bomar critical point dryer using Freon 13 as the transition fluid.

Sign in / Sign up

Export Citation Format

Share Document