The economical parameter survey program for long-term transient temperature distribution and stress analysis around the sodium level of the liquid metal fast breeder reactor

1987 ◽  
Vol 32 (3) ◽  
pp. 873-882
Author(s):  
S. Imayoshi ◽  
Y. Sato ◽  
A. Shiga
Keyword(s):  
Temperature Distribution ◽  
Liquid Metal ◽  
Stress Analysis ◽  
Sodium Level ◽  
Transient Temperature ◽  
Fast Breeder Reactor ◽  
Transient Temperature Distribution ◽  
Economical Parameter

TRANSIENT TEMPERATURE DISTRIBUTION FOR FULLY DEVELOPED LAMINAR FLOW IN A TUBE

1974 ◽  
Author(s):  
T. W. Schnatz ◽  
Edwin P. Russo ◽  
O. Tanner
Keyword(s):  
Temperature Distribution ◽  
Laminar Flow ◽  
Transient Temperature ◽  
Transient Temperature Distribution

Direct observation of three-dimensional transient temperature distribution in SiC Schottky barrier diode under operation by optical-interference contactless thermometry (OICT) imaging

2022 ◽  
Author(s):  
Keiya Fujimoto ◽  
Hiroaki Hanafusa ◽  
Takuma Sato ◽  
Seiichiro HIGASHI
Keyword(s):  
Temperature Distribution ◽  
Schottky Barrier ◽  
Hot Spot ◽  
Local Heating ◽  
Three Dimensional ◽  
Schottky Barrier Diode ◽  
Transient Temperature ◽  
Optical Interference ◽  
Transient Temperature Distribution ◽  
Heating And Cooling

Abstract We have developed optical-interference contactless thermometry (OICT) imaging technique to visualize three-dimensional transient temperature distribution in 4H-SiC Schottky barrier diode (SBD) under operation. When a 1 ms forward pulse bias was applied, clear variation of optical interference fringes induced by self-heating and cooling were observed. Thermal diffusion and optical analysis revealed three-dimensional temperature distribution with high spatial (≤ 10 μm) and temporal (≤ 100 μs) resolutions. A hot spot that signals breakdown of the SBD was successfully captured as an anormal interference, which indicated a local heating to a temperature as high as 805 K at the time of failure.

Measurement of Transient Temperature Distribution at Anode Surface After Current Zero in Vacuum Interrupter

2021 ◽  
Vol 141 (11) ◽  
pp. 712-717
Author(s):  
Akira Daibo ◽  
Yoshimitsu Niwa ◽  
Naoki Asari ◽  
Wataru Sakaguchi ◽  
Yo Sasaki ◽  
...  
Keyword(s):  
Temperature Distribution ◽  
Anode Surface ◽  
Transient Temperature ◽  
Vacuum Interrupter ◽  
Transient Temperature Distribution ◽  
Current Zero

Transient Temperature Distribution in Composites with Layers of Functionally Graded Materials (FGMs)

2006 ◽  
Vol 25 (5) ◽  
pp. 513-542 ◽  
Author(s):  
Bhupesh Agarwal ◽  
P. C. Upadhyay ◽  
Larry Banta ◽  
Donald Lyons
Keyword(s):  
Temperature Distribution ◽  
Functionally Graded Materials ◽  
Functionally Graded ◽  
Transient Temperature ◽  
Graded Materials ◽  
Transient Temperature Distribution

scholarly journals Exact Solution of Heat Transport Equation for a Heterogeneous Geothermal Reservoir

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2935 ◽  
Author(s):  
Sayantan Ganguly
Keyword(s):  
Temperature Distribution ◽  
Transport Equation ◽  
Heat Transport ◽  
Transport Processes ◽  
Geothermal Reservoir ◽  
Transient Temperature ◽  
Thermal Front ◽  
Transient Temperature Distribution ◽  
Heat Transport Equation ◽  
Geothermal Aquifer

An exact integral solution for transient temperature distribution, due to injection-production, in a heterogeneous porous confined geothermal reservoir, is presented in this paper. The heat transport processes taken into account are advection, longitudinal conduction and conduction to the confining rock layers due to the vertical temperature gradient. A quasi 2D heat transport equation in a semi-infinite porous media is solved using the Laplace transform. The internal heterogeneity of the geothermal reservoir is expressed by spatial variation of the flow velocity and the effective thermal conductivity of the medium. The model results predict the transient temperature distribution and thermal-front movement in a geothermal reservoir and the confining rocks. Another transient solution is also derived, assuming that longitudinal conduction in the geothermal aquifer is negligible. Steady-state solutions are presented, which determine the maximum penetration of the cold water thermal front into the geothermal aquifer.

Transient Temperature Distribution in a Slab

2018 ◽  
pp. 107-114
Author(s):  
John Newman ◽  
Vincent Battaglia
Keyword(s):  
Temperature Distribution ◽  
Transient Temperature ◽  
Transient Temperature Distribution

scholarly journals Heat transfer on simplified pre-period stage of tunnel fire

2019 ◽  
Vol 23 (Suppl. 3) ◽  
pp. 799-808
Author(s):  
Hungwei Liu ◽  
Wei Yao
Keyword(s):  
Heat Transfer ◽  
Temperature Distribution ◽  
Heating Rate ◽  
Theoretical Solution ◽  
Theoretical Equation ◽  
Thermal Engineering ◽  
Transient Temperature ◽  
Tunnel Fire ◽  
Transient Temperature Distribution ◽  
Heat Transfer Theory

Tunnel fire is a part of applied thermal problems. With increase of transient temperature of the tunnel fire on the structure surface (i.e. tunnel lining), the heat transfer from the surface is possibly varying transient temperature distribution within the structure. The transient temperature distribution is also possibly damaging the composition of structure (micro-crack) because of critical damage temperature. Therefore, the transient temperature distribution has a significantly important role on defining mechanical and physical properties of structure and determining thermal-induced damaged region. The damage at pre-period stage of tunnel fire is perhaps more significant than that at the other period stages because of thermal gradient. Consequently, a theoretical model was developed for simplifying complicated thermal engineering during pre-period stage of tunnel fire. A hollow solid model (HSM) in a combination of dimensional analysis and heat transfer theory with Bessel?s Function and Duhamel?s Theorem were employed to verify a theoretical equation for dimensionless transient temperature distribution (DTTD) under linear transient thermal loading (LTTL). Experimental and numerical methods were also adopted to approve the results from this theoretical equation. The heating rate (M) is a primary variable for discussing DTTD on three means. The heating rate of 10.191, 10 and 240?C/min were applied to experimental and numerical studies. The experimental and numerical results are consistent with the theoretical solution, successfully verifying that the theoretical solution can predict the DTTD well in field. This equation can be used for thermal/tunnel engineers to evaluate the damaged region and to obtain the parameters related to DTTD.

The Transient Temperature Distribution in a Slab Subject to Thermal Radiation

1965 ◽  
Vol 87 (1) ◽  
pp. 117-130 ◽  
Author(s):  
R. D. Zerkle ◽  
J. Edward Sunderland
Keyword(s):  
Temperature Distribution ◽  
Thermal Radiation ◽  
Radiant Heat ◽  
Analog Computer ◽  
Graphical Form ◽  
Transient Temperature ◽  
Transient Temperature Distribution ◽  
Temperature Distributions ◽  
Approximate Analytical Solutions ◽  
Wide Range

The transient, one-dimensional temperature distribution is determined for a slab, insulated on one face, and subjected to thermal radiation at the other face. The slab is initially at a uniform temperature and is assumed to be homogeneous, isotropic, and opaque; the physical properties are assumed to be independent of temperature. Transient temperature distributions for both heating and cooling situations are obtained by means of a thermal-electrical analog computer. A diode limiter circuit is used to simulate the nonlinear radiant heat flux. The transient temperature distributions are presented in a dimensionless, graphical form for a wide range of variables. Approximate analytical solutions are also given which complement and extend the solution charts over ranges of parameters not covered in the charts.

Sign in / Sign up

Export Citation Format

Share Document