Microstructure, electrical conductivity, and wear behavior of aluminum-carbon nanotubes and biosynthesized silver nanoparticles composites

2021 ◽  
Author(s):  
Clifford Ugochukwu Nwoji ◽  
Victor Sunday Aigbodion ◽  
John Akpan John
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Silver Nanoparticles ◽  
Wear Behavior

scholarly journals Hybridization effect on Electrical Conductivity and Thermal Behavior of Epoxy/Carbon Nanotubes and Biosynthesized Silver Nanoparticles Composites

2021 ◽  
Author(s):  
Aigbodion Victor Sunday ◽  
Solomon Chijioke Madu ◽  
Uche Chinweoke Ogbuefi ◽  
C.U Nwoji
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Silver Nanoparticles ◽  
Epoxy Polymer ◽  
Electronic Devices ◽  
Potential Reduction ◽  
Hybridization Effect ◽  
Enhanced Thermal Conductivity ◽  
Made In

Abstract An attempt was made in this work to decorated carbon nanotubes(CNTs) in a polymer matrix using biosynthesized silver nanoparticles (GAgNPs) using Cashew leaves as a reduction agent. The new hybrid epoxy-CNTs+ GAgNPs composites were produced by modified solution-stir-cast method. The microstructure, thermal properties, strength, and electrical conductivity of the produced composites were determined. The electrical conductivity of the epoxy polymer has been enhanced from 5.6x10-13S/cm to 4.80x10-3S/cm for epoxy-0.5%CNTs and 9.1x10-3S/cm epoxy-0.5%CNTs-0.5%GAgNPs. GAgNPs was effective used to improve the strength of conducting epoxy-CNTs for electronic devices. The addition of CNTs and GAgNPs to epoxy increases the glass transition temperature. It was established that GAgNPs can be promising materials to enhanced thermal conductivity, strength, electrical conductivity of epoxy-CNTs and recover the potential reduction for electronic devices application.

CARBON NANOTUBE-GRAFT-POLY (CITRIC ACID) CONTAINING SILVER AND PALLADIUM NANOPARTICLES

NANO ◽  
2009 ◽  
Vol 04 (04) ◽  
pp. 217-223 ◽  
Author(s):  
ALI BAHARI ◽  
H. HEKMATARA ◽  
R. SEPAHVAND ◽  
MOHSEN ADELI
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Silver Nanoparticles ◽  
Citric Acid ◽  
Palladium Nanoparticles ◽  
Metal Salts ◽  
Acid Mixture ◽  
Palladium Chloride ◽  
Simple Method ◽  
Multi Wall Carbon Nanotubes

A simple method has been developed for decorating multi wall carbon nanotubes (MWCNTs) with palladium and silver nanoparticles. In this method, MWCNT was opened and functionalized using nitric and sulfuric acid mixture. Then citric acid was polymerized in the presence of functionalized MWCNT and MWCNT-graft-poly (citric acid) (MWCNT-g-PCA) was obtained. The mixing of MWCNT-g-PCA with metal salts, such as palladium chloride and silver nitrate, leads to encapsulation of metal nanoparticles in the polymeric shell ( MWCNT/Pd, AgNPs ). The structure of MWCNT/Pd and AgNPs were characterized by usual spectroscopy and microscopy methods. The influence of nanoparticles on the electrical conductivity of MWCNT was also investigated.

scholarly journals Effect of SWCNT-Tuball Paper on the Lightning Strike Protection of CFRPs and Their Selected Mechanical Properties

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3140
Author(s):  
Kamil Dydek ◽  
Anna Boczkowska ◽  
Rafał Kozera ◽  
Paweł Durałek ◽  
Łukasz Sarniak ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Copper Foil ◽  
Impact Resistance ◽  
Mechanical Analysis ◽  
Lightning Strike ◽  
Single Wall Carbon Nanotubes ◽  
Carbon Fibre Reinforced Polymer ◽  
The Impact

The main aim of this work was the investigation of the possibility of replacing the heavy metallic meshes applied onto the composite structure in airplanes for lightning strike protection with a thin film of Tuball single-wall carbon nanotubes in the form of ultra-light, conductive paper. The Tuball paper studied contained 75 wt% or 90 wt% of carbon nanotubes and was applied on the top of carbon fibre reinforced polymer before fabrication of flat panels. First, the electrical conductivity, impact resistance and thermo-mechanical properties of modified laminates were measured and compared with the reference values. Then, flat panels with selected Tuball paper, expanded copper foil and reference panels were fabricated for lightning strike tests. The effectiveness of lightning strike protection was evaluated by using the ultrasonic phased-array technique. It was found that the introduction of Tuball paper on the laminates surface improved both the surface and the volume electrical conductivity by 8800% and 300%, respectively. The impact resistance was tested in two directions, perpendicular and parallel to the carbon fibres, and the values increased by 9.8% and 44%, respectively. The dynamic thermo-mechanical analysis showed higher stiffness and a slight increase in glass transition temperature of the modified laminates. Ultrasonic investigation after lightning strike tests showed that the effectiveness of Tuball paper is comparable to expanded copper foil.

scholarly journals Synthesis of silver nanoparticles embedded with single-walled carbon nanotubes for printable elastic electrodes and sensors with high stability

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jae-Won Lee ◽  
Joon Young Cho ◽  
Mi Jeong Kim ◽  
Jung Hoon Kim ◽  
Jong Hwan Park ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Silver Nanoparticles ◽  
High Performance ◽  
Composite Films ◽  
Single Walled Carbon Nanotubes ◽  
Gauge Factor ◽  
Time Interval ◽  
Single Walled Carbon ◽  
Irradiation Energy ◽  
Walled Carbon Nanotubes

AbstractSoft electronic devices that are bendable and stretchable require stretchable electric or electronic components. Nanostructured conducting materials or soft conducting polymers are one of the most promising fillers to achieve high performance and durability. Here, we report silver nanoparticles (AgNPs) embedded with single-walled carbon nanotubes (SWCNTs) synthesized in aqueous solutions at room temperature, using NaBH4 as a reducing agent in the presence of highly oxidized SWCNTs as efficient nucleation agents. Elastic composite films composed of the AgNPs-embedded SWCNTs, Ag flake, and polydimethylsiloxane are irradiated with radiation from a Xenon flash lamp within a time interval of one second for efficient sintering of conductive fillers. Under high irradiation energy, the stretchable electrodes are created with a maximum conductivity of 4,907 S cm−1 and a highly stretchable stability of over 10,000 cycles under a 20% strain. Moreover, under a low irradiation energy, strain sensors with a gauge factor of 76 under a 20% strain and 5.4 under a 5% strain are fabricated. For practical demonstration, the fabricated stretchable electrode and strain sensor are attached to a human finger for detecting the motions of the finger.

scholarly journals Enhancement of Electrical Conductivity of Aluminum-Based Nanocomposite Produced by Spark Plasma Sintering

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1150
Author(s):  
Nicolás A. Ulloa-Castillo ◽  
Roberto Hernández-Maya ◽  
Jorge Islas-Urbano ◽  
Oscar Martínez-Romero ◽  
Emmanuel Segura-Cárdenas ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Spark Plasma Sintering ◽  
Experimental Tests ◽  
Powder Morphology ◽  
Plasma Sintering ◽  
Multi Walled Carbon Nanotubes ◽  
Spark Plasma ◽  
Ball Milling Technique ◽  
Walled Carbon Nanotubes

This article focuses on exploring how the electrical conductivity and densification properties of metallic samples made from aluminum (Al) powders reinforced with 0.5 wt % concentration of multi-walled carbon nanotubes (MWCNTs) and consolidated through spark plasma sintering (SPS) process are affected by the carbon nanotubes dispersion and the Al particles morphology. Experimental characterization tests performed by scanning electron microscopy (SEM) and by energy dispersive spectroscopy (EDS) show that the MWCNTs were uniformly ball-milled and dispersed in the Al surface particles, and undesirable phases were not observed in X-ray diffraction measurements. Furthermore, high densification parts and an improvement of about 40% in the electrical conductivity values were confirmed via experimental tests performed on the produced sintered samples. These results elucidate that modifying the powder morphology using the ball-milling technique to bond carbon nanotubes into the Al surface particles aids the ability to obtain highly dense parts with increasing electrical conductivity properties.

Nanobiotechnology: Nature-inspired silver nanoparticles towards green synthesis

2021 ◽  
pp. 0958305X2198988
Author(s):  
Nur Syakirah Rabiha Rosman ◽  
Noor Aniza Harun ◽  
Izwandy Idris ◽  
Wan Iryani Wan Ismail
Keyword(s):  
Electrical Conductivity ◽  
Silver Nanoparticles ◽  
Green Synthesis ◽  
Metal Nanoparticles ◽  
Current Trend ◽  
Biological Properties ◽  
Noble Metal Nanoparticles ◽  
Current Application ◽  
Physical Chemical ◽  
Physical And Chemical

The emergence of technology to produce nanoparticles (1 nm – 100 nm in size) has drawn significant researchers’ interests. Nanoparticles can boost the antimicrobial, catalytic, optical, and electrical conductivity properties, which cannot be achieved by their corresponding bulk. Among other noble metal nanoparticles, silver nanoparticles (AgNPs) have attained a special emphasis in the industry due to their superior physical, chemical, and biological properties, closely linked to their shapes, sizes, and morphologies. Proper knowledge of these NPs is essential to maximise the potential of biosynthesised AgNPs in various applications while mitigating risks to humans and the environment. This paper aims to critically review the global consumption of AgNPs and compare the AgNPs synthesis between conventional methods (physical and chemical) and current trend method (biological). Related work, advantages, and drawbacks are also highlighted. Pertinently, this review extensively discusses the current application of AgNPs in various fields. Lastly, the challenges and prospects of biosynthesised AgNPs, including application safety, oxidation, and stability, commercialisation, and sustainability of resources towards a green environment, were discussed.

scholarly journals Electrically Conductive Networks from Hybrids of Carbon Nanotubes and Graphene Created by Laser Radiation

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1875
Author(s):  
Alexander Yu. Gerasimenko ◽  
Artem V. Kuksin ◽  
Yury P. Shaman ◽  
Evgeny P. Kitsyuk ◽  
Yulia O. Fedorova ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Laser Irradiation ◽  
Flexible Electronics ◽  
Threshold Energy ◽  
Wavelength Region ◽  
Hybrid Nanostructures ◽  
Graphene Sheets ◽  
Electrically Conductive ◽  
Walled Carbon Nanotubes

A technology for the formation of electrically conductive nanostructures from single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT), and their hybrids with reduced graphene oxide (rGO) on Si substrate has been developed. Under the action of single pulses of laser irradiation, nanowelding of SWCNT and MWCNT nanotubes with graphene sheets was obtained. Dependences of electromagnetic wave absorption by films of short and long nanotubes with subnanometer and nanometer diameters on wavelength are calculated. It was determined from dependences that absorption maxima of various types of nanotubes are in the wavelength region of about 266 nm. It was found that contact between nanotube and graphene was formed in time up to 400 fs. Formation of networks of SWCNT/MWCNT and their hybrids with rGO at threshold energy densities of 0.3/0.5 J/cm2 is shown. With an increase in energy density above the threshold value, formation of amorphous carbon nanoinclusions on the surface of nanotubes was demonstrated. For all films, except the MWCNT film, an increase in defectiveness after laser irradiation was obtained, which is associated with appearance of C–C bonds with neighboring nanotubes or graphene sheets. CNTs played the role of bridges connecting graphene sheets. Laser-synthesized hybrid nanostructures demonstrated the highest hardness compared to pure nanotubes. Maximum hardness (52.7 GPa) was obtained for MWCNT/rGO topology. Regularity of an increase in electrical conductivity of nanostructures after laser irradiation has been established for films made of all nanomaterials. Hybrid structures of nanotubes and graphene sheets have the highest electrical conductivity compared to networks of pure nanotubes. Maximum electrical conductivity was obtained for MWCNT/rGO hybrid structure (~22.6 kS/m). Networks of nanotubes and CNT/rGO hybrids can be used to form strong electrically conductive interconnections in nanoelectronics, as well as to create components for flexible electronics and bioelectronics, including intelligent wearable devices (IWDs).

Sign in / Sign up

Export Citation Format

Share Document