Green one-pot preparation of carbon dots (CD)-embedded cellulose transparent film for Fe3+ indicator using ionic liquid

Cellulose ◽  
2020 ◽  
Vol 27 (8) ◽  
pp. 4609-4621 ◽  
Author(s):  
Jeongyeon Woo ◽  
Younghan Song ◽  
Jungbin Ahn ◽  
Hyungsup Kim
NANO ◽  
2017 ◽  
Vol 12 (09) ◽  
pp. 1750108 ◽  
Author(s):  
Xiang Liu ◽  
Zhiyu Huang ◽  
Weiwei Tang ◽  
Baogang Wang

Ionic liquid modified carbon dots (CDs-IL) were successfully synthesized by one-pot pyrolysis. The tribological properties of CDs-IL as a kind of water-based lubricant additive were investigated under four-ball mode. The experimental results demonstrated that the added CDs-IL not only increased load-carrying capacity of base liquid but also displayed remarkable friction-reducing and antiwear properties. At an optimal concentration of 0.05[Formula: see text]wt.% and a proper load of 50[Formula: see text]N, the mean friction coefficient and wear volume reduced by 65% and 60%, respectively. The remarkable lubricating effect of CDs-IL was attributed to the boundary tribofilm formed by absorption and deposition of CDs-IL on rubbing surfaces. The lubricating effect of CDs-IL especially antiwear effect greatly attenuated when the load was lower or higher than 50 N because the function of deposition tribofilm formed by CDs-IL was suppressed by the absorption tribofilm or tribochemical film derived from triethanolamine in base liquid, respectively.


2020 ◽  
Vol 23 (2) ◽  
pp. 157-167
Author(s):  
Zainab Ehsani-Nasab ◽  
Ali Ezabadi

Objective: A facile and efficient method for synthesis of 3, 4-dihydropyrimidin-2(1H)-ones via Biginelli reaction catalyzed by a novel dicationic Brönsted acidic ionic liquid, [(EtNH2)2SO][HSO4]2, has been successfully developed. Material and Method:: 3, 4-Dihydropyrimidin-2(1H)-ones were synthesized through one-pot condensation of aromatic aldehydes, ethyl acetoacetate, and urea under solvent-free conditions using [(EtNH2)2SO][HSO4]2 as a novel catalyst. The progress of the reaction was monitored by thin-layer chromatography (ethyl acetate / n-hexane = 1 / 5). The products have been characterized by IR, 1H NMR, 13C NMR, and also by their melting points. Results: In this research, a library of dihydropyrimidinone derivatives was synthesized via Biginelli reaction under solvent-free conditions at 120oC using [(EtNH2)2SO][HSO4]2 as a catalyst. Various aromatic aldehydes, as well as heteroaromatic aldehydes, were employed, affording good to high yields of the corresponding products and illustrating the substrate generality of the present method. In addition, the prepared dicationic Brönsted acidic ionic liquid can be easily recovered and reused. Conclusion: 1, 1’-Sulfinyldiethylammonium bis (hydrogen sulfate), as a novel dicationic ionic liquid, can act as a highly efficient catalyst for the synthesis of 3, 4-dihydropyrimidin-2(1H)-ones under solvent-free conditions.


2020 ◽  
Vol 17 ◽  
Author(s):  
Saeid Azimi ◽  
Niloofar Mohamadighader

Abstract: A new solid catalyst was synthesized from an ionic liquid and heterogenised by changing anion reaction. The new heterogeneous acidic catalyst was characterized by SEM images, EDS analysis, AFM images, Ft-IR, HNMR, 13CNMR and Mass Spectroscopy. It was applied to synthesis of tri-arylmethanes throughout one-pot tri-component reactions among aromatic aldehydes, N,N-dimethylaniline and other carbonic nucleophiles such as anisole and indole. Hence, synthesis of convenient and inexpensive micro-heterogeneous catalyst was introduced, the efficiency of which was confirmed. Also, various useful products were synthesized throughout this simple and clean procedure.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohammad Hossein Abdollahi-Basir ◽  
Boshra Mirhosseini-Eshkevari ◽  
Farzad Zamani ◽  
Mohammad Ali Ghasemzadeh

AbstractA one-pot three component reaction of benzaldehydes, 1H-tetrazole-5-amine, and 3-cyanoacetyl indole in the presence of a new hexamethylenetetramine-based ionic liquid/MIL-101(Cr) metal–organic framework as a recyclable catalyst was explored. This novel catalyst, which was fully characterized by XRD, FE-SEM, EDX, FT-IR, TGA, BET, and TEM exhibited outstanding catalytic activity for the preparation of a range of pharmaceutically important tetrazolo[1,5-a]pyrimidine-6-carbonitriles with good to excellent yields in short reaction time.


2021 ◽  
Vol 11 (4) ◽  
pp. 1630
Author(s):  
Yakubu Newman Monday ◽  
Jaafar Abdullah ◽  
Nor Azah Yusof ◽  
Suraya Abdul Rashid ◽  
Rafidah Hanim Shueb

Carbon dots (CDs), a nanomaterial synthesized from organic precursors rich in carbon content with excellent fluorescent property, are in high demand for many purposes, including sensing and biosensing applications. This research focused on preparing CDs from natural and abundant waste, palm kernel shells (PKS) obtained from palm oil biomass, aiming for sensing and biosensing applications. Ethylenediamine and L-phenylalanine doped CDs were produced via the hydrothermal and solvothermal methods using one-pot synthesis techniques in an autoclave batch reactor. The as-prepared N-CDs shows excellent photoluminescence (PL) property and a quantum yield (QY) of 13.7% for ethylenediamine (EDA) doped N-CDs (CDs-EDA) and 8.6% for L-phenylalanine (L-Ph) doped N-CDs (CDs-LPh) with an excitation/emission wavelength of 360 nm/450 nm. The transmission electron microscopy (TEM) images show the N-CDs have an average particle size of 2 nm for both CDs. UV-Visible spectrophotometric results showed C=C and C=O transition. FTIR results show and confirm the presence of functional groups, such as -OH, -C=O, -NH2 on the N-CDs, and the X-ray diffraction pattern showed that the N-CDs were crystalline, depicted with sharp peaks. This research work demonstrated that palm kernel shell biomass often thrown away as waste can produce CDs with excellent physicochemical properties.


2019 ◽  
Vol 11 (4) ◽  
pp. 490-506 ◽  
Author(s):  
K. Radhakrishnan ◽  
P. Panneerselvam ◽  
M. Marieeswaran

In this work, a green synthetic route was used to create a number of surface passivated fluorescent carbon quantum dots, which are explored as promising sensing probes, via facile one-pot hydrothermal methods.


Sign in / Sign up

Export Citation Format

Share Document